Britmodeller Trading Section The last 25 new trading threads from Britmodeller http://www.britmodeller.com/forums/index.php Fri, 03 Sep 2010 04:43:46 +0100 25 Jazzy Jase http://www.britmodeller.com/forums/index.php?showtopic=55028

He is one of the best and one Top Guy.


Hawker]]> Thu, 02 Sep 2010 22:40:48 +0100 http://www.britmodeller.com/forums/index.php?showtopic=55028 F-89 1/72 Airwaves etched brass set http://www.britmodeller.com/forums/index.php?showtopic=55026
Cheers

Sean]]> Thu, 02 Sep 2010 22:04:39 +0100 http://www.britmodeller.com/forums/index.php?showtopic=55026 A little bit of overkill never hurt anybody.......much http://www.britmodeller.com/forums/index.php?showtopic=55025
A phone call to Hornby's spares department soon (about 72 hours) produced a box big enough to hold about twenty four Humbrol tinlets, but which instead contained a rollled up square of bubble wrap which, when unrollled, covered an area of four square feet. In the middle of this was my new fuselage half:) Smeone in Margate wanted to make damn' sure that that part didn't get damaged in transit.

Airfix always had good customer service: when they were at Marfleet there was a wonderful lady called Rita Anstee who dealt with this aspect of the business and she was legendary for the quality of service provided: Her spirit seems to have imbued the currrent team wjo have dealt with even my self-inflicted losses quickly and professionally (I had to confess that I'd written off the transparencies sprue for a Brewster Buffalo by treading on it, and I stilll had repalcements 42 hours later).

Nice one Airfix and Hornby! Thank you:)smile.gif]]> Thu, 02 Sep 2010 21:47:45 +0100 http://www.britmodeller.com/forums/index.php?showtopic=55025 Sweaty...good lad ! http://www.britmodeller.com/forums/index.php?showtopic=55016

Cheers
Andy]]> Thu, 02 Sep 2010 19:09:05 +0100 http://www.britmodeller.com/forums/index.php?showtopic=55016 Goose .... http://www.britmodeller.com/forums/index.php?showtopic=55014

Andy]]> Thu, 02 Sep 2010 19:07:24 +0100 http://www.britmodeller.com/forums/index.php?showtopic=55014 Its for Ronnie...again ! http://www.britmodeller.com/forums/index.php?showtopic=55012

Cheers

Andy]]> Thu, 02 Sep 2010 19:03:50 +0100 http://www.britmodeller.com/forums/index.php?showtopic=55012 part 1 of paint x-ref sheet from MAI July issue 60 http://www.britmodeller.com/forums/index.php?showtopic=55007
Cheers smile.gif]]> Thu, 02 Sep 2010 17:49:46 +0100 http://www.britmodeller.com/forums/index.php?showtopic=55007 Mosquito http://www.britmodeller.com/forums/index.php?showtopic=55001 i have a couple of kits to trade or pay pal to you?

1/72 scale Kopro su 25 k frogfoot (3121) box open no bag but ALL parts are there



1/72 scale revell P-38 L/M Lightning
]]> Thu, 02 Sep 2010 16:08:14 +0100 http://www.britmodeller.com/forums/index.php?showtopic=55001 Revell Sub U214 - Modelzone Birmingham http://www.britmodeller.com/forums/index.php?showtopic=54997
I've just seen a pile of Revell 1/144 Class 214 subs in Modelzone in Birmingham reduced to 5.99 (sorry my keyboard has no pound symbol!). Seems to be a fair reduction compared to the online prices I've just googled.

Seemed rude not to get one at that price. Hope it helps someone. And hope this is appropriate to post this?

biggrin.gif]]> Thu, 02 Sep 2010 14:08:21 +0100 http://www.britmodeller.com/forums/index.php?showtopic=54997 <![CDATA[looking for 1/35 Heli's]]> http://www.britmodeller.com/forums/index.php?showtopic=54987
Huey or UH-60 variants

will trade my
Hasegawa F/16A 1/32


All parts are there, some off sprue but in sprue bag.

Thanks
Brenden]]> Thu, 02 Sep 2010 11:23:45 +0100 http://www.britmodeller.com/forums/index.php?showtopic=54987 Hasegawa FG.1 parts http://www.britmodeller.com/forums/index.php?showtopic=54982
Chris]]> Thu, 02 Sep 2010 08:09:18 +0100 http://www.britmodeller.com/forums/index.php?showtopic=54982 c.smith10 http://www.britmodeller.com/forums/index.php?showtopic=54981
This guy advertise that he wanted a Revell 1/48 FGR2 so I contacted him by PM, and said I had one I was willing to let go.

I explained I was going to put it on ebay at £35.99 buy it now, (a high price I know, but the last one sold in just under an hour) but Because of fee, and paypal, I offer him the kit at £30 and postage at cost. £3.50 recorded.

I explained I needed the money, by friday, a deal was agreed, and I was promised, I would not be let down

WELL I HAVE BEEN

i got this this morning

QUOTE
hi
i've just been offered a revell fgr2 for £25 posted! now im guessing you dont want to sell yours for this price? im sorry if i've messed you about but my item still hasn't been paid for and i was hoping to use my paypal funds to buy kits rather than dip into my wages as there spread pretty thin as it is.

.
hope you understand

cheers, chris


Lets just say, the bloke has now caused me some issues, because I thought we had an agreed deal.

Lets just say He is certainly off my Christmas card List!!!!!!!!!!!!!!!!!!!!

Dave]]> Thu, 02 Sep 2010 08:03:29 +0100 http://www.britmodeller.com/forums/index.php?showtopic=54981 5 spoke Hurricane wheels in 1/48th http://www.britmodeller.com/forums/index.php?showtopic=54977
after a set(s) of these, Aires do some but come with masks, and expenisive, as do Ultracast, which are generally not available in the Uk (and expensive with the collapse of the pound!) or is there a UK Ultracast stockist? (Relish are usually out of stock, all the other listed do armour)

Annoyingly the Classic Airframes Fabric wing Hurricane has the 4 spoke, and the Heritage conversion lack the them.... both of which need them too.

Just wondering if any folks here might have some they got in error, or something....

can pay, or trade, got some old 1/72nd kits, old Airfix, Matchbox, a few Frog... not got around to making up a list yet.

please PM me if you can help
thanks
T]]> Thu, 02 Sep 2010 02:08:17 +0100 http://www.britmodeller.com/forums/index.php?showtopic=54977 Cutting Edge or Reheat 1/32nd ejection seat buckles http://www.britmodeller.com/forums/index.php?showtopic=54965
I think that either one or the other of these now defunct companies produced a photo etched fret of buckles and bits to make bang seat harnesses. Does anyone know where I can get hold of one, or something similar?

Personally, I like making belts with paper or lead sheet and I like the MDC p/e Sutton harnesses. In fact I've e-mailed them to suggest that they do something to fill the current vacuum for ejection seats. What has started this off is the recent acquisition of a Trumpeter Lightning, where there is absolutely nothing in the way of a harness.
I know that Eduard do a self adhesive pre-painted jobbie for about £12 for the Trumpeter kit but I have never used a pre-painted belt set and so I wonder how good they look (aren't they a bit 2-dimensional?). I thought you had to heat p/e stuff so that you could make it 'drape' but surely the paint burns off?

Quite simply, if I had a selection of the correct bits and pieces I think I could suss out the harness from either photos or drawings from the Martin Baker site but can you help with the Reheat or Cutting Edge fret?

Many thanks


Simon

Just realised that ReHeat made 1/72nd and 1/48th stuff but not 1/32nd! Any ideas?]]> Wed, 01 Sep 2010 21:47:17 +0100 http://www.britmodeller.com/forums/index.php?showtopic=54965 Looking for 1/72nd Russian decals http://www.britmodeller.com/forums/index.php?showtopic=54950
- 1/72 Tupolev tu-95MS
- 1/72 Mig-31 (revell kit decals will do)

for trade or buy

Cheers]]> Wed, 01 Sep 2010 15:44:39 +0100 http://www.britmodeller.com/forums/index.php?showtopic=54950 Well another one for Ronnie. http://www.britmodeller.com/forums/index.php?showtopic=54948 Fantastic guy thanks again Ron. Wed, 01 Sep 2010 15:31:23 +0100 http://www.britmodeller.com/forums/index.php?showtopic=54948 Graham at Relish Does it Again http://www.britmodeller.com/forums/index.php?showtopic=54945 a for the usual quick delivery
and
b putting up with my credit card hassles - turned out that when they sent me my new card with letter saying I didn't need to activate the card - I needed to activate the card!

Anyway thanks again

JohnT]]> Wed, 01 Sep 2010 14:23:36 +0100 http://www.britmodeller.com/forums/index.php?showtopic=54945 AIRFIXANDY http://www.britmodeller.com/forums/index.php?showtopic=54943 a nice easy trade with great communication, and a nice chap too. all the best Wed, 01 Sep 2010 14:02:51 +0100 http://www.britmodeller.com/forums/index.php?showtopic=54943 Heritage Aviation http://www.britmodeller.com/forums/index.php?showtopic=54934
This was my first purchase from Heritage, but it won't be my last.

Obi-Jiff fish.gif]]> Wed, 01 Sep 2010 12:37:00 +0100 http://www.britmodeller.com/forums/index.php?showtopic=54934 Trumpeter 1/32 Lightning F.1A/F.3 on sale at http://www.britmodeller.com/forums/index.php?showtopic=54928 http://www.luckymodel.com/scale.aspx?item_no=TP02280]]> Wed, 01 Sep 2010 10:15:02 +0100 http://www.britmodeller.com/forums/index.php?showtopic=54928 looking for UP launchers http://www.britmodeller.com/forums/index.php?showtopic=54926 I'm based in holland.
David.]]> Wed, 01 Sep 2010 10:03:03 +0100 http://www.britmodeller.com/forums/index.php?showtopic=54926 L/F 1.72 Hasegawa T-2 CCV http://www.britmodeller.com/forums/index.php?showtopic=54916
Julien]]> Tue, 31 Aug 2010 22:57:03 +0100 http://www.britmodeller.com/forums/index.php?showtopic=54916 FS - RNZAF Decals http://www.britmodeller.com/forums/index.php?showtopic=54911 Since I'm newish around these parts.... I am well known over on ARC, as well as being one of the moderators there. So you can buy with confidence!


]]> Tue, 31 Aug 2010 21:48:15 +0100 http://www.britmodeller.com/forums/index.php?showtopic=54911 Heller 1/24 E-Type Jaguar Coupe http://www.britmodeller.com/forums/index.php?showtopic=54910
I have many trade goods - just tell me what your interests are...

bestest,
M.]]> Tue, 31 Aug 2010 21:33:22 +0100 http://www.britmodeller.com/forums/index.php?showtopic=54910 Ronnie http://www.britmodeller.com/forums/index.php?showtopic=54908
G.]]> Tue, 31 Aug 2010 21:10:46 +0100 http://www.britmodeller.com/forums/index.php?showtopic=54908