beefy66 Posted September 30, 2020 Posted September 30, 2020 OK making a space for a long term build (Yes another one) but with a difference a sort of WHIF or WTF if you prefer. I,ll be using the Trumpeter 1/350 PETER STRASSER Aircraft carrier kit but going to bling it up with the INFINI detail upset for the Graf Zeppelin hence the title now Zeppelin was launched and used as target practice and evaluation by the Russians after the end of WW2 So this will just be my imagination going wild for some reason while doing a bit of research on this I found a build by Hyun Soo Kim based on the world of warships game and camouflage scheme bit like the dazzle scheme that Tirpitz wore at some point So it will be a slow one and a learning one for me but if anyone wants to join in with some help or just entertainment please do so. here we go with some box and bits shots the detail set is quite full 😱 Even has a flying saucer kit too 🤔 can you guess where I got these from Like I said it will be slow Stay Safe beefy 14
JohnWS Posted September 30, 2020 Posted September 30, 2020 35 minutes ago, beefy66 said: ... this will just be my imagination going wild ... Now this will be fun to watch. 37 minutes ago, beefy66 said: ... Like I said it will be slow ... Nothing wrong with that. More time for refreshments. John 1 2
Jerry L Posted September 30, 2020 Posted September 30, 2020 Will be following with great interest and restraint. Have the Zeppelin in the stash and am looking at the aftermarket sets for a build, however, I have to do the Titanic first or the CIC,👩🦰, will have my head for exceeding the naval budget.😀 1
robgizlu Posted September 30, 2020 Posted September 30, 2020 OOoohhh Seasonal pantomime!! Nah - only joking - Thsi is going to be good1 I'm in Rob 1 2
beefy66 Posted September 30, 2020 Author Posted September 30, 2020 7 minutes ago, robgizlu said: OOoohhh Seasonal pantomime!! Nah - only joking - Thsi is going to be good1 I'm in Rob Well you might just think this is a pantomime when you see the outcome 🤪 6 minutes ago, Dads203 said: When is this hitting the bench mate Going to be making a start on this tomorrow I say starting but it might take me a while to study what needs to go where with the detail set there’s quite a big instruction sheet for it and a bit to remove first do not want to do the usual trick of building up parts only to find it should have been replaced. Learned my lesson with that method. Stay Safe beefy 3 1
Iceman 29 Posted September 30, 2020 Posted September 30, 2020 Very interesting subject, I'm moving here! 1
longshanks Posted September 30, 2020 Posted September 30, 2020 Excuse me has anyone seen beefies plot cos he's gone and lost it again.......................... Going to be different Avoid the numpties and stay safe Kev 4
beefy66 Posted September 30, 2020 Author Posted September 30, 2020 6 minutes ago, longshanks said: Excuse me has anyone seen beefies plot cos he's gone and lost it again.......................... Going to be different Avoid the numpties and stay safe Kev Well when I started on the Fletcher build everyone thought that i had gone stark raving mad when I pulled out the dremel but look who's doing it now at the next level and enjoying it I suspect Stay Safe and never let them think you are sane beefy 1 2
Tojo72 Posted September 30, 2020 Posted September 30, 2020 Oooh,very nice,I got one in the stash,will be watching with interest 1
ArnoldAmbrose Posted October 1, 2020 Posted October 1, 2020 2 hours ago, beefy66 said: Well when I started on the Fletcher build everyone thought that i had gone stark raving mad when I pulled out the dremel Not so much stark raving mad, more like "WTF's he doing?" 😀 Gidday Beefy, this'll be good. And the beauty of a whif is that you can let your imagination run a little bit, or a lot. On day I'd planned on converting a Prinz Eugen kit into Weser (nee Seydlitz), so I'll be interested in how this turns out. Regards, Jeff. 1
Corsairfoxfouruncle Posted October 1, 2020 Posted October 1, 2020 Oooooooh taking my seat for this one. 1
longshanks Posted October 1, 2020 Posted October 1, 2020 8 hours ago, beefy66 said: Well when I started on the Fletcher build everyone thought that i had gone stark raving mad when I pulled out the dremel but look who's doing it now at the next level and enjoying it I suspect 8 hours ago, beefy66 said: and never let them think you are sane That's for the grown ups Carry on Sir! This is going to be fun Avoid the numpties and stay safe Kev 1
Courageous Posted October 1, 2020 Posted October 1, 2020 Stop faffing about Beefy and get stuck in. With this 'WTF' build, anything goes... Stuart 1
BeeKay Posted October 1, 2020 Posted October 1, 2020 Looking forward to this mate, you bringing it down tonight?
beefy66 Posted October 1, 2020 Author Posted October 1, 2020 1 hour ago, BeeKay said: Looking forward to this mate, you bringing it down tonight? OH yes with all the bells and whistles Stay Safe beefy 1
beefy66 Posted October 2, 2020 Author Posted October 2, 2020 On 10/1/2020 at 7:59 AM, Courageous said: Stop faffing about Beefy and get stuck in. With this 'WTF' build, anything goes.. Not quite anything Stuart I will not be building the fly saucer 👽 And so It has started couple of hours last night at the art class ?? or so we are now known instead of model club if the politicians can get away with it why not join them loopholes. Hull halfs glued and some main parts dry fitted and some brass work that will go with it And a bit play with some other parts So the ZEP looks like it did coming out of the ship yard now Stay Safe beefy 9
Courageous Posted October 3, 2020 Posted October 3, 2020 Well, that bit of 'art' is rather big. Where are you going to dock it when it's built? Stuart
robgizlu Posted October 3, 2020 Posted October 3, 2020 Agree with Stuart - big old thing and lightening progress by my standards. As to Art - 3D - Yes IMHO Rob
beefy66 Posted October 3, 2020 Author Posted October 3, 2020 On 10/1/2020 at 7:53 PM, Michael M said: I'm in, I'll annoy you with some 'tips' Michael annoy away I need all the help I can get most here think it should be from a Psychiatrist though 4 hours ago, Courageous said: Well, that bit of 'art' is rather big. Where are you going to dock it when it's built? Stuart funny but the missus was asking that same question last night and she said I should get a display cabinet for the model room I have learned a long time ago not to argue so will be paying a visit to IKEA soon 😉 1 hour ago, robgizlu said: Agree with Stuart - big old thing and lightening progress by my standards. As to Art - 3D - Yes IMHO Rob the progress might slow up quite a bit when I start on all the little shiny stuff Bit of a size comparison to other 1/350 scale stuff on the bench need to get my finger out I know Stuart so swift will be getting most of the attention this week to clear some space The hanger and boat deck will need some clean up for some reason Trumpeter have all the ejector pin marks on the side you will see instead of the other face that will not be seen The hull has what looks like ballast tanks that I think are also part of the armour belt looks like something from a submarine Stay Safe beefy 10
ArnoldAmbrose Posted October 3, 2020 Posted October 3, 2020 Gidday Beefy, that's an interesting size comparison in the photo. That's one of the reason I like to work in one scale only, albeit a different scale from you. Regards, Jeff. 1
Dr_Fester Posted October 12, 2020 Posted October 12, 2020 Beefy, you will enjoy making the PE AA guns in the infinity set. 🥴 Good progress and if you need anything 3D printed give me a shout. I have some extra anchors if you need em. Cheers Doc 1
RGL Posted October 16, 2020 Posted October 16, 2020 So, a 2fer, another GZ builder. Have at it, the Strasser always had huge potential as a helicopter attack ship too! 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now