Val Posted September 16, 2017 Share Posted September 16, 2017 Hi all, Kit manufacture: Revell Scale: 1/72 Type: Junkers JU 88A-4 Extras used: OOB except brass rod pitot and EZ line antenna Paints and colours used: Vallejo RLM colours (older type). Weathered with Flory Grime, and oil paints. All sealed with Aqua Gloss and flattened with Xtracylix matt varnish. I finished this one a little while ago but have only just got round to photographer her.A good kit this with generally good fit, but a couple of challenging areas. The wingtips being one of them... Beautiful surface detail though, and a wonderfully detailed cockpit.Here's the pics: That's about it. Thank you for stopping by! As always, comments, criticism and advice is always welcomed!Val 63 Link to comment Share on other sites More sharing options...
ArmouredSprue Posted September 16, 2017 Share Posted September 16, 2017 Very nice. Well done mate 1 Link to comment Share on other sites More sharing options...
SimonT Posted September 16, 2017 Share Posted September 16, 2017 I don't think I've seen that scheme before. I especially like your weathering under the wings. 1 Link to comment Share on other sites More sharing options...
Corsairfoxfouruncle Posted September 16, 2017 Share Posted September 16, 2017 Very nice 88 love the weathering 1 Link to comment Share on other sites More sharing options...
Mark4700 Posted September 17, 2017 Share Posted September 17, 2017 Fantastic results. The paint finish and weathering is sublime. 1 Link to comment Share on other sites More sharing options...
celt Posted September 17, 2017 Share Posted September 17, 2017 Wonderful paintwork,wonderful model,wonderful aircraft.Well tidy mun. 1 Link to comment Share on other sites More sharing options...
Michael51 Posted September 17, 2017 Share Posted September 17, 2017 A brilliant piece of work! Michael 1 Link to comment Share on other sites More sharing options...
Vinnie Posted September 17, 2017 Share Posted September 17, 2017 Another cracking build. What was the difficulty with the wing tips, please? Forwarned etc........ 1 Link to comment Share on other sites More sharing options...
Sgt.Squarehead Posted September 17, 2017 Share Posted September 17, 2017 Beautiful finish, the weathering effects are exquisite.....You should do some tanks! 1 Link to comment Share on other sites More sharing options...
Learstang Posted September 17, 2017 Share Posted September 17, 2017 Brilliant job on the Ju-88! Where was this aircraft based? It has an interesting combination of Mediterranean markings (white under wingtips and white fuselage stripe), and Balkans/Eastern Front markings (yellow engines and tail planes). Regards, Jason 1 Link to comment Share on other sites More sharing options...
Wm Blecky Posted September 17, 2017 Share Posted September 17, 2017 Looks really nice. I am curious, did you clear coat the clear parts? They look "foggy". 1 Link to comment Share on other sites More sharing options...
bruce bay Posted September 17, 2017 Share Posted September 17, 2017 Looks fantastic. Making me want to try one out. Really lovely variations in the greens. 1 Link to comment Share on other sites More sharing options...
gazza l Posted September 17, 2017 Share Posted September 17, 2017 Very nicely done, I particularly like the weathering, very realistic. gazza l 1 Link to comment Share on other sites More sharing options...
Val Posted September 18, 2017 Author Share Posted September 18, 2017 Thanks everyone for your kind words! 16 hours ago, Vinnie said: Another cracking build. What was the difficulty with the wing tips, please? Forwarned etc........ Thanks mate. To be fair, it's not so much difficult, but you've just got a seam to fill and sand. This in itself of course isn't a problem, it's just that you've got some lovely panel detail and rivetting around this seam which unfortunately will be lost and quite hard (for me) to put back in. The panels aren't a square shape so is needs a bit of care. It's more of a problem on the underside which will be less seen so it's not the end of the world. Link to comment Share on other sites More sharing options...
Val Posted September 18, 2017 Author Share Posted September 18, 2017 15 hours ago, Sgt.Squarehead said: Beautiful finish, the weathering effects are exquisite.....You should do some tanks! Thanks mate! To be honest, I've been back modelling for a few years now and I've never been too worried about tanks. However, after seeing some awesome tank builds on here and Flory's forums, I have a couple that have made their way into the stash! They do look fun, so will get stuck in soon Link to comment Share on other sites More sharing options...
Val Posted September 18, 2017 Author Share Posted September 18, 2017 14 hours ago, Learstang said: Brilliant job on the Ju-88! Where was this aircraft based? It has an interesting combination of Mediterranean markings (white under wingtips and white fuselage stripe), and Balkans/Eastern Front markings (yellow engines and tail planes). Regards, Jason Thanks Jason, it was a lot of fun! That is an interesting question and I didn't know any of that. The model is based on JU 88A-4 of 9./KG 30 "Alder-Geschwader", Catania, Sicily, Italy, June 1941. The only think added from the OOB decals was a swastika. To be completely honest I followed the Revell instructions without any personal research so I do not know how accurate they are at all. And if I interpreted the colour callouts correctly! It was also the aircraft on the box. Val 1 Link to comment Share on other sites More sharing options...
Val Posted September 18, 2017 Author Share Posted September 18, 2017 12 hours ago, Wm Blecky said: Looks really nice. I am curious, did you clear coat the clear parts? They look "foggy". Thanks mate. Good point, they do on the photos! I hadn't noticed, but they are fine in real life. I guess it's a trick of the light. I did have a problem with a touch of fog in one or two minor places as I used Tamiya extra thin, but only in the corners of clear parts. Not really noticeable if you're not looking for them, and certainly not like the pics suggest. Link to comment Share on other sites More sharing options...
kapam Posted September 19, 2017 Share Posted September 19, 2017 Really nice build. I have admired this kit from afar (meaning: I have read the modelling press about it) and have often thought about adding it to the stash. I would be well pleased if I could do half as good a build as yours. 1 Link to comment Share on other sites More sharing options...
HL-10 Posted September 19, 2017 Share Posted September 19, 2017 Lovely looking Ju88! 1 Link to comment Share on other sites More sharing options...
sandros Posted September 19, 2017 Share Posted September 19, 2017 Probably the model should be displayed on the underside. Very nice weathering. And the oli blending on th upper surfaces is superb. The Revell kit is a direct contender on the Hasegawa kit, i hope to draw from the stash sometime. 1 Link to comment Share on other sites More sharing options...
Val Posted September 19, 2017 Author Share Posted September 19, 2017 Cheers everyone! It's really appreciated! 8 hours ago, kapam said: Really nice build. I have admired this kit from afar (meaning: I have read the modelling press about it) and have often thought about adding it to the stash. I would be well pleased if I could do half as good a build as yours. I'm sure you'll do a great job, no worries! I can recommend the kit, it's really nice. It's just typical Revell, fit is fine, just needs a bit of sanding here and there. Only filling I did was some plasticard strips on one of the wing roots and the some styrene-extra thin mix on the wing tips. It's very well detailed. Link to comment Share on other sites More sharing options...
old thumper Posted September 25, 2017 Share Posted September 25, 2017 Very nice. The last time I built a Revell Ju-88 it was the old rivety kit, this new kit looks lots better. 1 Link to comment Share on other sites More sharing options...
fernandocouto Posted September 26, 2017 Share Posted September 26, 2017 Nice work. Revell's Ju88A/C(new mold) has ful of details comparing with HAS or Zvezda, especially the cockpit and panel lines/hatches on chine. However it's not a joy to build. I had built one C-6 before, with similar problem on wing tip. Also the flaps are wrapped and difficult to attach on the wing. Fitting around the gondola is complex. My kit has gaps on cowling radiators, still do not know how to fill.... 1 Link to comment Share on other sites More sharing options...
FalkeEins Posted September 26, 2017 Share Posted September 26, 2017 1 hour ago, fernandocouto said: However it's not a joy to build. it's not is it. 50+ parts in the cockpit is a bit much in 72nd. But the end result is probably worth a bit of cussing. Your's looks great Val! 1 Link to comment Share on other sites More sharing options...
Val Posted September 26, 2017 Author Share Posted September 26, 2017 13 hours ago, fernandocouto said: Nice work. Revell's Ju88A/C(new mold) has ful of details comparing with HAS or Zvezda, especially the cockpit and panel lines/hatches on chine. However it's not a joy to build. I had built one C-6 before, with similar problem on wing tip. Also the flaps are wrapped and difficult to attach on the wing. Fitting around the gondola is complex. My kit has gaps on cowling radiators, still do not know how to fill.... Cheers! Yeah there were a few areas that required attention. The glass section which fitted on the underside of the nose was too wide for the fuselage too. I had to do quite a bit of filling and sanding around the wheel well area too. I had a real fight putting the flaps on too! Just keep filling and sanding buddy, you'll get there in the end 12 hours ago, FalkeEins said: it's not is it. 50+ parts in the cockpit is a bit much in 72nd. But the end result is probably worth a bit of cussing. Your's looks great Val! Thanks! It was a very well detailed cockpit. Too detailed for 1/72? I would have said not so when I first put it together, but by the time you have the glasswork on you can see very little of it, so probably is I guess. It took a long time to do the cockpit! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now