Marklo Posted July 31, 2022 Share Posted July 31, 2022 (edited) Great build, I love the home vac forming rig. My own is an inherited hoover and a picture frame and a metal box off eBay. Enjoying this one as I have two vac forms in the stash. A Contrail Zepplin Stakken ( which may never see the light of day as it’s huge) and a Heinkel 119 which may be built for the Prototypes, racers and special schemes GB… Edited October 7, 2022 by Marklo 1 Link to comment Share on other sites More sharing options...
ianwau Posted August 20, 2022 Author Share Posted August 20, 2022 A bit of progress to report since last post. - finished off some detailing of the nose interior. It's for photographic surveying - so camera kit and operator/observers armchair. - Vacformed nose has been fitted and blended in - detailing of the cockpit interior - fitting of the original kit vacform canopy (fits very nicely) Then onto design and cutting of the canopy masks using Silhouette Cameo - quite extensive actually, combo of cabin windows, main cockpit and nose. Also evidence of a couple of other projects on the go... Here's the cabin windows being applied using 'transfer film'. Makes sure that cut masks are applied whilst preserving cabin window spacing and longitudinal alignment.... And a bit boring - but here's what it looks like with all the masking applied. So much simpler than my old approach of handcut masks. And there's no way I could have handled all the windows with their curved corners. And after a coat of Tamiya Fine Gray Primer.. The basic undercarriage has been fitted - which helps keep the model elevated for the painting process. Getting awfully close to paint - it's by no means a Tamiya kit - but aiming to make it all tidy and presentable, and able to show off the colourful colour scheme And onto some more masking. My planned marking scheme features some rather awkward lettering (for rego markings, and operators logo). It's that classic block lettering - but with a strong white border/background. Thankfully, the Silhouette comes to the rescue again - by cutting masks for the white border/background - initially prepped in MS Powerpoint - then transferred to the Silhouette Design Studio software... Here's the expected outcome (time will tell!) And here's the same thing as set out in the Silhouette Design Studio software. The cutter is going to cut along the red lines - and the letters will define the area which remains white. Hope that makes sense. Subsequent posts will show this laid out on the model with the colour(s) going on... 17 Link to comment Share on other sites More sharing options...
heloman1 Posted August 20, 2022 Share Posted August 20, 2022 This build is coming together very well, I'm liking it a lot. Great work with the masks. Colin 1 Link to comment Share on other sites More sharing options...
greggles.w Posted August 21, 2022 Share Posted August 21, 2022 Much progress, very good to see. Fishbowl nose has merged smoothly into the overall form, well done. Thanks for outlining your masking process. You & I both muddling through similar task in similar way .. though for me it’s inverse: black edging to white numerals. I too will be using the ‘transfer film’, as last time (first time) I used it it worked a treat! .. but I was still cutting by hand. I have started that long process of rationalising (self-deluding) that inevitably leads up to an expensive purchase! I’ve been sniffing around these cutters .. seems there’s two main brands, and two types: smaller, cheaper, presumably less capable; and then larger, more expensive, and more bells and whistles. Which is yours? And am I right to suspect that, like old bubblejet printers, there’s a ‘hidden cost’ I ought to allow for, for attachments, blades etc? Look forward to your ‘AD ASTRA’ successful results confirming I must invest .. 4 Link to comment Share on other sites More sharing options...
ianwau Posted August 22, 2022 Author Share Posted August 22, 2022 Yes, why DO we choose colour schemes that don't have a ready to apply decal set? Problem solving is of course half the fun (well, some of it). Nice working on the hand cutting - looks like plenty of prep work setting it all out - and the results suggests all the ingredients for a quality outcome. 3 hours ago, greggles.w said: I’ve been sniffing around these cutters .. seems there’s two main brands, and two types: smaller, cheaper, presumably less capable; and then larger, more expensive, and more bells and whistles. Which is yours? I have the Silhouette which the modelling fraternity tea leaves seem heavily in favour of (vs the Cricut). There's a great summary comparison of these two on FB Group "The Cutting Edge scale modeling plotter/cutter users" which I can dig out? The Silhouette Portrait has a ~8" wide bed [fine for 1/72 and small 1/48], the Silhouette Cameo is 12" - no need to go beyond the basic Cameo in my view. Hidden costs are the cutting medium (dirt cheap), transfer film (optional but cheap), replacement blades (~AU$25) and sticky cutting mat (~$AU25) but I'm still on my first included blade/mat. Seems to me I'll easily get a couple of dozen model masks out of each blade? Others might be able to offer their experience? I think bigger risk is it'll all be made redundant by technology (eg a new model comes out, Or Windows 15 is incompatible etc) but I'm banking on 5yr useful life. Best path in would be to send your files in compatible file format to a friendly with a machine and get them to cut for you. eg I'm happy to run some experiments for you (PM me). 1 Link to comment Share on other sites More sharing options...
AdrianMF Posted August 22, 2022 Share Posted August 22, 2022 Beautiful job on the nose glazing and it looks very smart in the masking and primer. Looking forward to the paint job now. Regards, Adrian 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted August 22, 2022 Share Posted August 22, 2022 Looks wonderful with everything blended and in primer. Masks for serials and company name look good. Great work Chris 1 Link to comment Share on other sites More sharing options...
ianwau Posted September 9, 2022 Author Share Posted September 9, 2022 More progress. Here's the masks cut using Oramask 810 and the Silhouette Cameo. Background material has been removed.... Lettering is for the fatso white outline... And picked up using 'transfer film' and applied to the model. The background coat looks a bit grey, but it's actually white. Blame the lighting... Masking on - ready for some top coat Not forgetting to mask off the white fuselage top and white empennage. Top coat is a rich teal/turquoise colour... And then mask fo the black antiglare nose, and a wafer thin pin stripe between the white top and teal bottom... Am using the Valleja rattlecan flat black for this - marvellous stuff (although some reviews suggest it doesn't take well to being masked - but since I'm not going to mask it....) And the reveal! One of the most enjoyable parts of the build for me. When it works of course. And very, very happy with the way this one has worked.. Without the mask cutter - there's no way I could have done all those cabin windows with their evenly rounded corners. Let alone the complex compound curves around the nose windows. And the shadowed lettering. A bit of a learning curve with the mask cutter - but well worth the effort (and it'll be easier again next time). So as flagged in earlier post - I've elected to go the home made decal route for doing the black part of the shadowed lettering. Here we see the laser printed decals ready to cut out and apply. This has basically all been done with the aid of MS Powerpoint and an off the shelf laser printer - ie no fancy software required. Here we go.... And a bit more. Really enjoying this build. Whilst it's a very 'cottage' (and cheap) Contrail vacform kit as the basis - she's scrubbing up nicely in my view. Missing some of the finer detail you'd expect of a 'modern' kit but not trying to be perfect (vs enjoying it). Next steps. - undercarriage. - cowls, exhaust etc. - aerials (quite a few of them!) - weathering (subtle and light - no need to get carried away) 14 Link to comment Share on other sites More sharing options...
John_W Posted September 9, 2022 Share Posted September 9, 2022 Beautiful work there. Nice to see a civil Hudson in such a striking scheme. 1 Link to comment Share on other sites More sharing options...
Moggy Posted September 9, 2022 Share Posted September 9, 2022 Brilliant modelling! Cheers, Moggy 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted September 9, 2022 Share Posted September 9, 2022 Oh yes, a cracking scheme and you have done a cracking job , it looks gorgeous. Chris 1 Link to comment Share on other sites More sharing options...
ianwau Posted September 29, 2022 Author Share Posted September 29, 2022 Calling this one done. - glued on all the fiddly bits. - aerials - a bit of light weathering Quite enjoyed this one - the base kit is pretty basic and required a bit of patience and a bit of experience. Lots of new techniques learned and applied on this one - which is what it's often about. I have intentionally not gone overboard in trying to transform it into the most accurate/detailed masterpiece. So haven't dropped the flaps, opened doors, or reset control surfaces etc. Happy that it'll sit nicely on the shelf. Thanks for following along... Oh - you remember right when I started, the comment a project such as this is pretty much guaranteed to generate a new tool injection moulded kit? Well a little bit of photoshop has helped produce the mock-up below. In a series of tasty schemes (thanks to http://www.adastra.adastron.com/aircraft/hudson/hudson.htm for these!) JUST KIDDING!!!! But will come back with a 'told you so' when it comes to fruition. 25 Link to comment Share on other sites More sharing options...
dcrfan Posted September 29, 2022 Share Posted September 29, 2022 Haha I'm ordering one to go with all my uncompleted 1/48 twins - Ventura, Lodestar (modified Ventura) and Hudson. 1 Link to comment Share on other sites More sharing options...
Zephyr Posted September 29, 2022 Share Posted September 29, 2022 That looks magnificent! Contrail kits are great but they still require a large amount of those elusive "modelling skills" that I've been unable to buy online... Outstanding work. I love the box top, and after the 1/48 Anson surely a Hudson is the obvious next RAF twin for Airfix...??? 1 Link to comment Share on other sites More sharing options...
gingerbob Posted September 29, 2022 Share Posted September 29, 2022 4 hours ago, ianwau said: this is pretty much guaranteed to generate a new tool injection moulded kit Ha ha, can I put it on "Rumourmonger"? Lovely result. I'd say "inspiring", but really I think it more intimidating than encouraging! I haven't even mustered the courage to attempt my Classic Airframes one yet. 1 Link to comment Share on other sites More sharing options...
Winded Penguin Posted September 29, 2022 Share Posted September 29, 2022 On 6/11/2022 at 8:41 AM, ianwau said: The fuse and wings were set in my customary lego jig That is an example of simply phenomenal lateral thinking at work 👍 And has some poor child been deprived of their toys? 😆 1 Link to comment Share on other sites More sharing options...
sroubos Posted September 29, 2022 Share Posted September 29, 2022 Great topic, a masterclass in building vacform, masking transparencies and designing decals all at once. May I ask how you designed the masks for the windows in the Silhouette software? It seems tricky to get those compound curves on the windows to translate to a flat surface in the software, how did you achieve this? Link to comment Share on other sites More sharing options...
AdrianMF Posted September 29, 2022 Share Posted September 29, 2022 Gorgeous. Love the scheme too. Regards, Adrian 1 Link to comment Share on other sites More sharing options...
ianwau Posted September 29, 2022 Author Share Posted September 29, 2022 2 hours ago, sroubos said: May I ask how you designed the masks for the windows in the Silhouette software? It seems tricky to get those compound curves on the windows to translate to a flat surface in the software, how did you achieve this? Thank you! For the front glasshouse - I actually used a set of aftermarket 1/72 Hudson masks as a template - scaled up to 1/48 and manually traced. Needed a bit of fettling but they were 90% right first go. The other technique I've used is to apply a sheet of wide masking tape over target area - mark up the required shape(s) with eg a marking pen, or mark out with 1mm tape (in contrasting colour) - digitally scan the result and use that to manually trace/prep in Silhouette. Hope that makes sense! 2 hours ago, Winded Penguin said: And has some poor child been deprived of their toys? Ha! Luckily the deprived children are now in their 20's and moved out - and possession (of said Lego) is 9/10's of the law? Most of it was actually picked up at garage sales years ago - and luckily with those large size base plates. 3 Link to comment Share on other sites More sharing options...
greggles.w Posted September 29, 2022 Share Posted September 29, 2022 Great result- such a fetching livery! And so creatively arrived at with ingenuity & perseverance. That nose is a triumph. congratulations! 1 Link to comment Share on other sites More sharing options...
ianwau Posted September 29, 2022 Author Share Posted September 29, 2022 3 hours ago, Zephyr said: I love the box top, and after the 1/48 Anson surely a Hudson is the obvious next RAF twin for Airfix...??? Thanks Zephyr! Surely yes from Airfix. I'd even buy one despite having done this (after all that was the point of doing it!) 2 hours ago, gingerbob said: Ha ha, can I put it on "Rumourmonger"? Oh dear! Does Airfix read Rumourmonger? There'll be a fall scale investigation on who 'leaked' the top secret 2023 project??? Link to comment Share on other sites More sharing options...
bigbadbadge Posted September 29, 2022 Share Posted September 29, 2022 It does look stunning, great work , enjoyed watching this develope. Like the mock up too, would love Airfix to do one of these. Great work Chris 1 Link to comment Share on other sites More sharing options...
Derek_B Posted September 30, 2022 Share Posted September 30, 2022 Great work Ian, looks marvellous! the clear nose is a triumph! That worked very well! 1 Link to comment Share on other sites More sharing options...
ianwau Posted September 30, 2022 Author Share Posted September 30, 2022 22 hours ago, gingerbob said: Lovely result. I'd say "inspiring", but really I think it more intimidating than encouraging! I haven't even mustered the courage to attempt my Classic Airframes one yet. Thank you! Re the courage. If it helps - the vacform kit only cost me $AU12 2nd hand (about 10% of a Classic Airframes 2nd hand these days?). This meant I really had very little to lose by having a go - nothing ventured, nothing gained? I think I'd have far more trepidation tackling a Classic Airframes Hudson given street value. Am sure the Airfix 1/48 Hudson will be cheaper and cheerfuller when released! Link to comment Share on other sites More sharing options...
Malc2 Posted October 7, 2022 Share Posted October 7, 2022 (edited) I have only just found this and have to say what a great job you have done! Vacforms are usually regarded as difficult, but you have breezed through this with aplomb! I am glad your vacforming worked out! (Phew!) Malc. Edited October 8, 2022 by Malc2 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now