RidgeRunner Posted September 12, 2018 Share Posted September 12, 2018 (edited) 6 hours ago, Robert said: Hope the decal guys are taking notice of this kit as l hope to see some appearing soon afterwards. Robert I'll second that. I'd go South American....... Or maybe French to pair with the SMB2 that might some time come ......... I just hope Modelsvit include long range tanks! Martin Edited September 12, 2018 by RidgeRunner Link to comment Share on other sites More sharing options...
RidgeRunner Posted September 12, 2018 Share Posted September 12, 2018 Would I be misguided to hope for a good Mirage 3D from them too? Martin 1 Link to comment Share on other sites More sharing options...
Silverkite Posted September 12, 2018 Share Posted September 12, 2018 (edited) Does the Mirage IIIE serves as base for the Swiss Mirage IIIS? Cause I have a couple of PJ/HPM conversions but only one old tool PJ Mirage IIIE and I was planning to fetch a couple of upgraded toolings but this will maybe do the trick, hoping that someone will also unleash a freaking Mirage III NG conversion someday Luigi Edited September 12, 2018 by Silverkite Link to comment Share on other sites More sharing options...
ivand Posted September 12, 2018 Share Posted September 12, 2018 4 hours ago, Silverkite said: Does the Mirage IIIE serves as base for the Swiss Mirage IIIS? Yes. 1 Link to comment Share on other sites More sharing options...
ivand Posted September 12, 2018 Share Posted September 12, 2018 22 hours ago, RidgeRunner said: This is looking fab! Modelsvit produce great stuff and so I hope this will follow their normal trend. So how about a IIIR? That would get my vote. Martin I just hope they won't be too heavy-handed on the rivets (which is what annoys me about the RV kit). Mirage fuselages are pretty sleek in reality. No use in giving them the skin of a T-6! Mind you, I don't have any experience with Modelsvit kits, so my remark is solely based on the 3D renders. Link to comment Share on other sites More sharing options...
RidgeRunner Posted September 12, 2018 Share Posted September 12, 2018 1 hour ago, ivand said: I just hope they won't be too heavy-handed on the rivets (which is what annoys me about the RV kit). Mirage fuselages are pretty sleek in reality. No use in giving them the skin of a T-6! Mind you, I don't have any experience with Modelsvit kits, so my remark is solely based on the 3D renders. I do, Ivan, and they are usually great. Martin Link to comment Share on other sites More sharing options...
Aardvark Posted September 13, 2018 Share Posted September 13, 2018 4 hours ago, ivand said: I just hope they won't be too heavy-handed on the rivets (which is what annoys me about the RV kit). Mirage fuselages are pretty sleek in reality. No use in giving them the skin of a T-6! Mind you, I don't have any experience with Modelsvit kits, so my remark is solely based on the 3D renders. I have next models from Modelsvit: Mirage III-V, Yak-140, M-17, I-3U, I-7U, I-320; E-150(early edition), E-150(late edition), E-152A, E-152M, MiG-21F, Su-7, Su-7BM,Su-7IG, S-32 hybrid, Su-17M, Su-17M3....I don't see mass riveting on this models! So as I suppose Mirage IIIE it's first all riveting model Modelsvit? If this is the case, then it's meaningless to judge by 3D rendering about riveting. Good or bad riveting on Mirage III E from Modelsvit we know only when see mould! But anyway all riveting models it's new level for Modelsvit! B.R. Serge Link to comment Share on other sites More sharing options...
Tomppa B Posted September 13, 2018 Share Posted September 13, 2018 A true Mirage IIIB in 1/72 would be greatly appreciated. Link to comment Share on other sites More sharing options...
RidgeRunner Posted September 13, 2018 Share Posted September 13, 2018 (edited) 11 hours ago, Aardvark said: I have next models from Modelsvit: Mirage III-V, Yak-140, M-17, I-3U, I-7U, I-320; E-150(early edition), E-150(late edition), E-152A, E-152M, MiG-21F, Su-7, Su-7BM,Su-7IG, S-32 hybrid, Su-17M, Su-17M3....I don't see mass riveting on this models! So as I suppose Mirage IIIE it's first all riveting model Modelsvit? If this is the case, then it's meaningless to judge by 3D rendering about riveting. Good or bad riveting on Mirage III E from Modelsvit we know only when see mould! But anyway all riveting models it's new level for Modelsvit! B.R. Serge Agreed. Where did this talk of RV come from? Why dont we save on anguish and wait until the sprue shots come! Martin Edited September 13, 2018 by RidgeRunner Link to comment Share on other sites More sharing options...
ivand Posted September 13, 2018 Share Posted September 13, 2018 (edited) 6 hours ago, RidgeRunner said: Agreed. Where did this talk of RV come from? Why dont we save on anguish and wait until the sprue shots come! Martin The RV kit was mentioned on the first page in this thread. I agree with you - we should just wait for the first sprue shots. Sorry for starting off about hypothetical rivets! 😊 Edited September 13, 2018 by ivand Link to comment Share on other sites More sharing options...
Aardvark Posted September 13, 2018 Share Posted September 13, 2018 11 hours ago, RidgeRunner said: Why dont we save on anguish and wait until the sprue shots come! But what about spiritual torment, sleepless nights, fortune telling, spiritualistic sessions with the spirit of the computer that projects 3D renderers Mirage IIIE ? You do not want megapages discussion of the 3-d renders without which not only does one self-respecting modelers forum? In the end, do you want to leave the Prozac sellers without money from the modelers? B.R. Serge 1 2 Link to comment Share on other sites More sharing options...
Homebee Posted October 7, 2018 Author Share Posted October 7, 2018 Source: https://www.facebook.com/modelsvit/posts/2214931425442563 Quote Hello friends, some fresh news from us: 1/72 Mirage III E's molding is already in progress, soon first sprue sets shall be presented. Meanwhile, take a look at its art-box. The kit comes in November/December with complete aftermarket package( PE sheet /ncl. instument panel/, adhesive masks /inner and outer/), pair of missiles AIM-9B and Matra Magic II, Phimat Chaff Dispenser, Barrax ECM pod and ..... AN-52 nuclear bomb. For your full satisfaction, we have added 3 types of external fuel tanks, each having capacity of: 500L, 1300L and 1700L, and 3 colouring schemes (see bellow). V.P. 3 2 Link to comment Share on other sites More sharing options...
Meatbox8 Posted October 7, 2018 Share Posted October 7, 2018 Wow. That is some impressive artwork. Really looking forward to this one. Link to comment Share on other sites More sharing options...
RidgeRunner Posted October 7, 2018 Share Posted October 7, 2018 3 hours ago, Homebee said: Source: https://www.facebook.com/modelsvit/posts/2214931425442563 V.P. That ticks ALL my boxes! Martin Link to comment Share on other sites More sharing options...
Homebee Posted October 23, 2018 Author Share Posted October 23, 2018 Source: https://www.facebook.com/story.php?story_fbid=2223320264603679&id=1854784001457309 V.P. 1 1 Link to comment Share on other sites More sharing options...
Mountain goat Posted October 23, 2018 Share Posted October 23, 2018 (edited) "Those of you, expecting riveting on the fuselage and wings, hope shall stay satisfied!" Jay (Sorry if I seem negative -- Delta Mirages have been a long time coming so perhaps good on Modelsvit in that respect) Edited October 23, 2018 by Mountain goat Link to comment Share on other sites More sharing options...
MarkoZG Posted October 23, 2018 Share Posted October 23, 2018 OMG, I really hope this trend would soon be over! Link to comment Share on other sites More sharing options...
Tomppa B Posted October 23, 2018 Share Posted October 23, 2018 Judging from the picture they have located every single panel line and rivet and reproduced them faithfully. Link to comment Share on other sites More sharing options...
Wez Posted October 23, 2018 Share Posted October 23, 2018 3 hours ago, Mountain goat said: "Those of you, expecting riveting on the fuselage and wings, hope shall stay satisfied!" I am not satisfied, quite the opposite really. 2 hours ago, MarkoZG said: OMG, I really hope this trend would soon be over! We can only live in hope, talk about the Emperor's new clothes. 1 hour ago, Tomppa B said: Judging from the picture they have located every single panel line and rivet and reproduced them faithfully. And placed a hole where the rivet will go to make the surface flush you mean. Sorry Modelsvit, you've lost a potential customer with these divots. Guess I'll be waiting for the Special Hobby kits. 2 Link to comment Share on other sites More sharing options...
Homerlovesbeer Posted October 23, 2018 Share Posted October 23, 2018 Wow guys, It's really not that hard to fill in or sand off the rivet details if you hate them. Isn't it more important the shape and dimensions are accurate? Good canopy and cockpit detail also? Seems like a lot of anguish over rivets that are not hard to make disappear. Link to comment Share on other sites More sharing options...
Mountain goat Posted October 23, 2018 Share Posted October 23, 2018 Just now, Homerlovesbeer said: Wow guys, It's really not that hard to fill in or sand off the rivet details if you hate them. Isn't it more important the shape and dimensions are accurate? Good canopy and cockpit detail also? Seems like a lot of anguish over rivets that are not hard to make disappear. In this case it's a small model, literally covered with divots. The shape may get ruined by all the sanding. Also I can imagine that if I'd remove the rivets I'd end up removing panel lines too. I could rescribe everything - but then why should I spend money for removing divots and resribing if there are old kits which need similar treatment. My take: rivets make for great detail and when made well you have a seriously nice detailed-looking model. If you want realistic-looking however... Agree with Wez, won't be buying the six I want now, will wait for Special Hobby. Jay Link to comment Share on other sites More sharing options...
Homerlovesbeer Posted October 23, 2018 Share Posted October 23, 2018 (edited) Ok got it. Mr surfacer 1000/1500 and a smail paintbrush along the rivets would make the job an ok task though and keep panel detail intact. Edit: hmm maybe not. You are right...far too many of them. A heavy coat of primer and a rescibe probably the best option. Edited October 23, 2018 by Homerlovesbeer Link to comment Share on other sites More sharing options...
Mr T Posted October 23, 2018 Share Posted October 23, 2018 My take on the rivet thing at the moment is that the technology now exists to put this level of detail in and so it suddenly becomes expected by a certain section of the model building community. I am currently building the Eduard 1/72nd Spitfire that covered in them and a lot of people rave about them. I fancy one to do an Aussie 111O, but will reserve judgment until it appears. Link to comment Share on other sites More sharing options...
Tbolt Posted October 23, 2018 Share Posted October 23, 2018 Unfortunately there seems to be more people now that want rivets on there kits, they seem to prefer "nice" looking models over a realistic one. Personally I'm not keen on rivet holes in 1/72 but these to look to be pretty fine so I may be able to live with them. 2 Link to comment Share on other sites More sharing options...
Radleigh Posted October 23, 2018 Share Posted October 23, 2018 Knowing the quality of Modelsvit moulding, I think these rivets look worse in the photo than what it will look like. Won't stop me getting one, I'm sure it'll be great in our hands. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now