AV O Posted March 20, 2009 Share Posted March 20, 2009 (edited) Hello , I imagine again your soft sarcasms about the short landing. At least, it looks like a runway : you cannot say the pilot landed on a racing car track !!! Though, I thank you for your comments and encouragements on the other posts. Could I keep these two aside ? In fact I started with them. UTA had 2 -300 registered F-GETA / TB and 2 -200 registered F-BTDG / DH. The -200s went through SUD conversion. But retained their -200 main deck specificities (slides). They all were Combis with the side Cargo door and used on the West Africa network either in 11 or 7 pallets versions according to the season.. Air France inherited them. And used them on the French West Indies network in a high density lay out. These destinations are now served with 777-300 high density versions. Here are the last two "in one" . Each side being painted in the livery of each airline. It took a long time to make up my mind whether to have a go. I finally decided to go through the surgery, the searching of pictures, cutting and sanding plastic card and it gave this : The result was not too bad. But after viewing more close-up pictures, I realised that many features were not correct. Hasegawa's scribing is not accurate for the L/E slats which mislead me for the cutting and the location and size of the wing's fairings are not good either. So I started again with a -400 this time. I used the same painting way but reversed the sides. UTA had 2 -400 (F-GEXA and F-GEXB). GEXB had to be the left side one as she was a Combi. A detail that can be noted on the models : On the three molds -100/200 / -300 / -400, the rear bulk door shape is different. In my opinion, only the -400's is correct. At the end of a long flight, silence has come back with engines on idle, then the last instant of lift, and... touchdown : wings outer end sinking, reverse roaring, spoilers raising... Only the tyres smoke is missing !!! Here is a picture of the Boeing family : Others should now follow soon in different liveries. Happy modelling week-end to all. Edited November 24, 2017 by AV O 9 Link to comment Share on other sites More sharing options...
bexwh773 Posted March 20, 2009 Share Posted March 20, 2009 Now thats a lovely sight to go to bed on, a pair of gorgeous 747's Excellent work there as I can imagine in that scale, dealing with trailing and leading edge flaps & slats is no easy task Thanks again for a lovely set of airliners, especially Boeings second finest Bexy Link to comment Share on other sites More sharing options...
Alan P Posted March 21, 2009 Share Posted March 21, 2009 (edited) Lovely conversions, the landing gear attitude looks exactly right. The dynamism of your work really stands out, short landings and all!! (On the 777 we know all about short landings!!!! ) My only point for your future work on Boeings is that the primed interior areas are a very bright lurid green rather than yellow-green these days. Edited March 21, 2009 by PHaTNesS Link to comment Share on other sites More sharing options...
Mark Posted March 21, 2009 Share Posted March 21, 2009 Al beat me to it! I was just about to say that the way you've got the wheels touching down looks just like a 747 to me! You're right, a little smoke is all you'd need! But if you want a really nit-picking critical comment (and I hate to do it!) but the spoilers and reversers are fully deployed and the aircraft has only just kissed the runway. Both of these would have a input from the aircraft's air/ground logic that would include the sensors in the oleos of the main gear. When these are depressed, the aircraft 'knows' it's on the ground and only then will the reversers be allowed to deploy along with the spoilers to their fullest extent. The spoilers can, of course, be deployed in the air, but not to their fullest extent as they do on landing. But then if your modles are as good as this, you'll probably already know all of that!! They really are great models and there's not enough civil modelling on here, so they are good to see. Link to comment Share on other sites More sharing options...
darson Posted March 21, 2009 Share Posted March 21, 2009 Wow nice piece of work that, you've really captured the look of a landing 747 to a tee Cheers Link to comment Share on other sites More sharing options...
AV O Posted March 21, 2009 Author Share Posted March 21, 2009 Lovely conversions, the landing gear attitude looks exactly right. The dynamism of your work really stands out, short landings and all!!(On the 777 we know all about short landings!!!! ) My only point for your future work on Boeings is that the primed interior areas are a very bright lurid green rather than yellow-green these days. Even more, simply grey.(i.e. slats interior, maybe depending on the airline requirements). Link to comment Share on other sites More sharing options...
AV O Posted March 21, 2009 Author Share Posted March 21, 2009 (edited) Al beat me to it! I was just about to say that the way you've got the wheels touching down looks just like a 747 to me! You're right, a little smoke is all you'd need! But if you want a really nit-picking critical comment (and I hate to do it!) but the spoilers and reversers are fully deployed and the aircraft has only just kissed the runway. Both of these would have a input from the aircraft's air/ground logic that would include the sensors in the oleos of the main gear. When these are depressed, the aircraft 'knows' it's on the ground and only then will the reversers be allowed to deploy along with the spoilers to their fullest extent. The spoilers can, of course, be deployed in the air, but not to their fullest extent as they do on landing. But then if your modles are as good as this, you'll probably already know all of that!! They really are great models and there's not enough civil modelling on here, so they are good to see. You are right ! This was just a way of showing the way it can be done. You can stick the spoilers in a starting motion as well as the thrust reversers just opening. But the way the gears are, is the position in which the model is balanced and needs no artificial item to stand. Just think the pressure on the oleos is effective ! Or take a picture further ahead on the runway.... But my board is not long enough !!!! Or, admit the pressure is already on. When airborne, the tilting gear is almost vertical. In a kind of humourous answer to your post about the Falcon : Think about how thick your pilot's soles should be so he reaches the rudder pedals ! Thanks for your comments anyway. Cheers ! Edited March 22, 2009 by AV O Link to comment Share on other sites More sharing options...
atdb27 Posted April 6, 2009 Share Posted April 6, 2009 great Detail to add extended Flaps etc in this scale Did you add from 'experience' or 'Possibly'? Either way great work AV O I like them a lot. Adrian Link to comment Share on other sites More sharing options...
JosephLalor Posted April 7, 2009 Share Posted April 7, 2009 (edited) Al beat me to it! I was just about to say that the way you've got the wheels touching down looks just like a 747 to me! You're right, a little smoke is all you'd need! But if you want a really nit-picking critical comment (and I hate to do it!) but the spoilers and reversers are fully deployed and the aircraft has only just kissed the runway. Both of these would have a input from the aircraft's air/ground logic that would include the sensors in the oleos of the main gear. When these are depressed, the aircraft 'knows' it's on the ground and only then will the reversers be allowed to deploy along with the spoilers to their fullest extent. The spoilers can, of course, be deployed in the air, but not to their fullest extent as they do on landing. But then if your modles are as good as this, you'll probably already know all of that!! They really are great models and there's not enough civil modelling on here, so they are good to see. Hi Mark, Are spoiler and thrust reverser deployment automatically induced by undercarriage compression or do they require control input from the pilot? I ask because the fuselage of G-ARTA, the VC-10 prototype, was buckled by premature spoiler deployment, while in line service with BCal. AV O, lovely models. I didn't even think of dropping the flaps on my Hase' 747. Joseph Edited April 7, 2009 by JosephLalor Link to comment Share on other sites More sharing options...
keefr22 Posted April 7, 2009 Share Posted April 7, 2009 Lovely work again! Don't know how I missed this thread until now! In regard to the 'short' landing? What's the runway number at St. Maarten? Because it certainly wouldn't be 'short' there - just have a look at the famous KLM 747 on Youtube for instance.....!!! Great models!! Keef Link to comment Share on other sites More sharing options...
Mark Posted April 10, 2009 Share Posted April 10, 2009 Hi Mark,Are spoiler and thrust reverser deployment automatically induced by undercarriage compression or do they require control input from the pilot? I ask because the fuselage of G-ARTA, the VC-10 prototype, was buckled by premature spoiler deployment, while in line service with BCal. AV O, lovely models. I didn't even think of dropping the flaps on my Hase' 747. Joseph Hi Joseph, in answer to your question I guess it depends upon the type. On the modern airbusses, the spoilers are 'armed' and automatically deploy upon landing when the LGCIU (Landing Gear Computer) detects that the aircraft is on the ground and the FADEC detects a Reverse Thrust input from the pilot and a Thrust Lever Angle (TLA) in the Reverse Thrust position is detected by the SEC (Slat and Elevator Computer) only then will the spoilers automatically deploy. So, I guess that they are both automatic but dependent upon Pilot actions. Hope that helps!! Link to comment Share on other sites More sharing options...
JosephLalor Posted April 10, 2009 Share Posted April 10, 2009 Hi Joseph, in answer to your question I guess it depends upon the type. On the modern airbusses, the spoilers are 'armed' and automatically deploy upon landing when the LGCIU (Landing Gear Computer) detects that the aircraft is on the ground and the FADEC detects a Reverse Thrust input from the pilot and a Thrust Lever Angle (TLA) in the Reverse Thrust position is detected by the SEC (Slat and Elevator Computer) only then will the spoilers automatically deploy.So, I guess that they are both automatic but dependent upon Pilot actions. Hope that helps!! Sounds good to me, thanks, Mark. Link to comment Share on other sites More sharing options...
Alan P Posted April 11, 2009 Share Posted April 11, 2009 Hi Joseph, in answer to your question I guess it depends upon the type. On the modern airbusses, the spoilers are 'armed' and automatically deploy upon landing when the LGCIU (Landing Gear Computer) detects that the aircraft is on the ground and the FADEC detects a Reverse Thrust input from the pilot and a Thrust Lever Angle (TLA) in the Reverse Thrust position is detected by the SEC (Slat and Elevator Computer) only then will the spoilers automatically deploy.So, I guess that they are both automatic but dependent upon Pilot actions. Hope that helps!! Ha, there's the difference between Boeing and Airbus philosophies - On the 777, the spoilers deploy in auto when Radalt reads less than 2ft, and either oleo compression or wheel spin-up is detected. They will also deploy if reverse thrust is selected without wheel spin-up (ie pilot input at ground level). You don't need to torture the alphabet to stop a Boeing! Link to comment Share on other sites More sharing options...
Kev1n Posted July 19, 2009 Share Posted July 19, 2009 (edited) Ha, there's the difference between Boeing and Airbus philosophies - On the 777, the spoilers deploy in auto when Radalt reads less than 2ft, and either oleo compression or wheel spin-up is detected. They will also deploy if reverse thrust is selected without wheel spin-up (ie pilot input at ground level). You don't need to torture the alphabet to stop a Boeing! Smart models....no question. If you want a bit of well meant criticism, the way to display these would be to have main gear fully on the runway but nose still off the deck. You need to build a base for the model to go on, and either mount on that permanantly of use the dispaly stand hole to create a mount that the kit slides on to when displayed on the base. That way you get an accurate build of an aicraft just after touchdown, with full deployment of spoilers and reverse thrust selected. As to St maarten, yeah....it's not unkown for landing aircraft to kiss the piano keys.....and I confess to once removing the fence on maho beach after a non-stop from LHR in an MD11 - along with the heads of anybody standing by it I guess. Just as well this happened on MS Flight sim..... 10 out of 10 for the builds Edited July 19, 2009 by kev1n Link to comment Share on other sites More sharing options...
GreyGhost Posted November 30, 2009 Share Posted November 30, 2009 This is SO COOL ! Very Nice and Imaginative ! Gregg Link to comment Share on other sites More sharing options...
woody37 Posted November 30, 2009 Share Posted November 30, 2009 Wow, you must have more patience than Kev with his open doors !!!! Amazing detail, well done and thanks for sharing Link to comment Share on other sites More sharing options...
HOUSTON Posted December 8, 2009 Share Posted December 8, 2009 AWESOME !!! Link to comment Share on other sites More sharing options...
Kev1n Posted December 9, 2009 Share Posted December 9, 2009 Wow, you must have more patience than Kev with his open doors !!!!Amazing detail, well done and thanks for sharing dont forget the cockpits and other interior thingys I like this kind of extra work on models...I'm a detail geek.... Link to comment Share on other sites More sharing options...
AV O Posted March 16, 2013 Author Share Posted March 16, 2013 (edited) Not interior thingys, but outside detail to keep the scene realistic : Before mod : After fixing the movable stab : Edited November 24, 2017 by AV O Link to comment Share on other sites More sharing options...
jimbuna Posted March 16, 2013 Share Posted March 16, 2013 Very nice indeed. Link to comment Share on other sites More sharing options...
AV O Posted October 3, 2014 Author Share Posted October 3, 2014 (edited) They really are great models and there's not enough civil modelling on here, so they are good to see. Yes, but rules are the rules, and most of the airliners fans have given up. Edited October 3, 2014 by AV O Link to comment Share on other sites More sharing options...
Gimme Shelter Posted October 3, 2014 Share Posted October 3, 2014 this diorama and adaptive work on the wings is brilliant - you have hear the screech of the tyres touching down and smell the rubber! Link to comment Share on other sites More sharing options...
AV O Posted November 16, 2014 Author Share Posted November 16, 2014 (edited) An other one. Loaded ! Edited November 24, 2017 by AV O 2 Link to comment Share on other sites More sharing options...
AV O Posted August 20, 2015 Author Share Posted August 20, 2015 (edited) A few more pictures : Edited November 24, 2017 by AV O 2 Link to comment Share on other sites More sharing options...
AV O Posted October 10, 2015 Author Share Posted October 10, 2015 (edited) But if you want a really nit-picking critical comment (and I hate to do it!) but the spoilers and reversers are fully deployed and the aircraft has only just kissed the runway. Both of these would have a input from the aircraft's air/ground logic that would include the sensors in the oleos of the main gear. When these are depressed, the aircraft 'knows' it's on the ground and only then will the reversers be allowed to deploy along with the spoilers to their fullest extent. The spoilers can, of course, be deployed in the air, but not to their fullest extent as they do on landing. I finally found a good lawyer (shouldn't I say solicitor ?) http://www.airliners.net/photo/KLM---Royal/Boeing-747-406M/0463001/L/&sid=644db43f787318bc521d57afb5bc3af2 Edited October 10, 2015 by AV O Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now