fewr9fkr9595 Posted January 3, 2017 Share Posted January 3, 2017 . 6 Link to comment Share on other sites More sharing options...
SimonT Posted January 3, 2017 Share Posted January 3, 2017 Both nice, did your paint testing go well? Link to comment Share on other sites More sharing options...
fewr9fkr9595 Posted January 3, 2017 Author Share Posted January 3, 2017 Experimenting with the hataka have glass grey!!! It came in the us/usn 8 colour set. The bottle label says 'sac bomber green'. I think that it may have the wrong label on it as I dont think bomber green is a dirty brown metallic grey? Anyway Here it is on the back of some sandpaper. Depending on the angle its light and dark. So I sprayed it on tailfin scrap, that already had some aluminium on it. (Ak extreme). A few builds so far on the net have used a metallic base for this scheme. Anyway in the name of science I masked a strip off then did some black and grey Stynylrez either side. When it came to the have glass, The leading edge had the heaviest application to kill off the base colours, then the rest was thin enough to allow some variation to show through. Results: As this paint seems best in an even coat I will need to do the work beforehand rather than with post shading etc. So i think for best effect on the build I will paint and prime the plane in grey stynylrez, then do some fine pre shading and highlighting of panels with mr color type black and silver. Then a thin overall coat of the hataka paint to allow all the hard work to show through. 5 Link to comment Share on other sites More sharing options...
modelling minion Posted January 3, 2017 Share Posted January 3, 2017 Looks like this will be a very well thought out build, you've certainly done your homework with the paint for the Have Glass option. Link to comment Share on other sites More sharing options...
SimonT Posted January 3, 2017 Share Posted January 3, 2017 That does look good on my screen so should be better in real life too, definitely see a "sparkle". Do you recommend the Hataka paints? I've been wondering about the Aggressor set... Link to comment Share on other sites More sharing options...
Lex77 Posted January 3, 2017 Share Posted January 3, 2017 Nice choices. Aggressors are always nice to see and I'm looking forward how the have glass paint scheme works out. Link to comment Share on other sites More sharing options...
trickyrich Posted January 3, 2017 Share Posted January 3, 2017 welcome aboard Tony, another excited sole I see itching to get started! A couple of nice choices you have there, the Have Glass F-16's sound really interesting, can't what to see this build. Well good luck with the builds especially with the paint job as it seems to be a major part of the first scheme! Link to comment Share on other sites More sharing options...
Cookenbacher Posted January 4, 2017 Share Posted January 4, 2017 Ooooh, very cool paint experiment - looking forward to the final scheme. Link to comment Share on other sites More sharing options...
fewr9fkr9595 Posted January 4, 2017 Author Share Posted January 4, 2017 Thanks to all 👍🏿 Link to comment Share on other sites More sharing options...
mirageiv Posted January 4, 2017 Share Posted January 4, 2017 Some more great choices! (not that a Viper can have a bad one imho :)) I look forward to how you tackle the Have glass scheme, certainly is tricky to nail. Also another N, great! Your paint testing looks like great start, sure this will be a stunner. I was messing about trying to get something similar once when I was planning on doing a Greek Blk 52 Have glass (haven't got round to it yet) and mixing Tamiya acrylics with Alclads gave some promising results for the differing appearance in various lighting but I look forward to seeing your paint mixes! cheers, David. 1 Link to comment Share on other sites More sharing options...
fewr9fkr9595 Posted January 8, 2017 Author Share Posted January 8, 2017 (edited) Made a start on the N. This is going to be the quicker of the two hopefully, will be canopy down so just using the decals for pit. Seat is very bland so going to be replaced. Painted the the whole intake part in its camo color, next will run some tape around the inside of the lip then spray the interior shade. Hopefully should end up with a painted rim. This build is going to have minor updates. From a revell kit - seat, wheels and sidewinders as the Hasegawa parts are showing their age. Plus some resin GE engine parts from my tomcat project - burner face/tube and nozzle. Edited January 8, 2017 by Tony Oliver 5 Link to comment Share on other sites More sharing options...
trickyrich Posted January 8, 2017 Share Posted January 8, 2017 well you're off to a good start, the new resin bit should help a bit as well. Link to comment Share on other sites More sharing options...
Tim Moff Posted January 8, 2017 Share Posted January 8, 2017 (edited) Are the caracal next Gen Vipers available in 72nd? I have only seen in 48th. Was flirting with the idea with my Tamiya 1/72 CJ. Looking at OOB 52nd FW at Spang (goes with my USAFE project) at the moment though. Looked at their facebook page, they recently returned from Op IR, still in traditional colours - no Have Glass V at the 480th FS yet.... Edited January 8, 2017 by Tim Moff Link to comment Share on other sites More sharing options...
fewr9fkr9595 Posted January 8, 2017 Author Share Posted January 8, 2017 Yes mate, but only direct from themselves it seems at the minute, cant find any UK stoockists. Enzo matrix has sent the above mentioned scheme from his sheet, hopefully be here soon... 1 Link to comment Share on other sites More sharing options...
Tim Moff Posted January 9, 2017 Share Posted January 9, 2017 (edited) 15 hours ago, Tony Oliver said: Yes mate, but only direct from themselves it seems at the minute, cant find any UK stoockists. Enzo matrix has sent the above mentioned scheme from his sheet, hopefully be here soon... Great stuff - couldn't even see them on their site! Look forward to the results. Edit ..... seen on the site 72-019 - includes some overseas Vipers too. Cool. Edited January 9, 2017 by Tim Moff Link to comment Share on other sites More sharing options...
Caerbannog Posted January 9, 2017 Share Posted January 9, 2017 Interesting post on the colours. Will have to pic up some Hataka and also AK Extreme once they get in my way. Will be interesting to watch this build. René Link to comment Share on other sites More sharing options...
fewr9fkr9595 Posted January 10, 2017 Author Share Posted January 10, 2017 N update: Stynylrez spot priming on problem areas, seams, and filled holes & ejectior pin marks. If all is well then it will be final assembly and clean up before a proper priming sesh. Hoping to be doing the camo on the weekend 👍🏿 3 Link to comment Share on other sites More sharing options...
trickyrich Posted January 10, 2017 Share Posted January 10, 2017 wow you are progressing quickly! I haven't even started mine yet! Link to comment Share on other sites More sharing options...
fewr9fkr9595 Posted January 10, 2017 Author Share Posted January 10, 2017 Thanks Rich. Want to get this pair out of the way sharpish, or may do them concurrently along with a he-111 thats to order (first commission build ever) which needs to be done by march as will be relocating back down south... and I need to get the hobbyboss tomcat saga rolling again... Not enough time!!! Link to comment Share on other sites More sharing options...
trickyrich Posted January 11, 2017 Share Posted January 11, 2017 I know that feeling well!!! Too many projects and too little time! 1 Link to comment Share on other sites More sharing options...
fewr9fkr9595 Posted January 12, 2017 Author Share Posted January 12, 2017 (edited) Above - tam cj progress - filled the vent. Also removed molded details from cockpit tub ready for etch bits. N progress - Was busy last night, few joins to sort out. Should be making a start on camo Saturday-ish. Edited January 12, 2017 by Tony Oliver Pic order 3 Link to comment Share on other sites More sharing options...
trickyrich Posted January 12, 2017 Share Posted January 12, 2017 very nice, you look like you have her all sorted for painting, will be nice to see some colour on her! Link to comment Share on other sites More sharing options...
fewr9fkr9595 Posted January 14, 2017 Author Share Posted January 14, 2017 N Coming along nicely... Mr Hobby Aqueos colors. Light grey first, just where needed. Then the dark gull followed by grey blue freehand with 0.2mm tamiya hg and levelling thinner. Masking for nose and wingtip pylons in neutral grey next, then some overall touchups. Also need to do leading edges of rear flying surfaces in 337 perhaps with a touch of blue added. 6 Link to comment Share on other sites More sharing options...
trickyrich Posted January 14, 2017 Share Posted January 14, 2017 Very nicely done!! The only thing I don't like with Mr Hobby colours is that quite a few of them are only Semi-gloss and not matt. It can give a very uneven finish. I wish the Tamiya range was as extensive, I just love there paints, pretty well impossible to stuff up when airbrushing. Though Mr Hobby paints do go on very nicely as well! Really nice free hand work, I've not tried the levelling solution, but after seeing your work I may have to....well done! Link to comment Share on other sites More sharing options...
fewr9fkr9595 Posted January 14, 2017 Author Share Posted January 14, 2017 2 hours ago, trickyrich said: Very nicely done!! The only thing I don't like with Mr Hobby colours is that quite a few of them are only Semi-gloss and not matt. It can give a very uneven finish. I wish the Tamiya range was as extensive, I just love there paints, pretty well impossible to stuff up when airbrushing. Though Mr Hobby paints do go on very nicely as well! Really nice free hand work, I've not tried the levelling solution, but after seeing your work I may have to....well done! Thanks for the props! Thats quite true... The odd gloss ones I have can be the worse to spray, unless you use the levelling thinner and wet coats. The majority of mr hobby/color colours are satin and are quite good to work with once you get the hang of them... Couple reasons - the levelling thinner allows for finer work and a longer drying time so gives more time for them to even out, so they don't end up as patchy. Also then once detail painting is done you can normally decal onto the satin surface, or if you want to go full gloss with your preferred product then it doesn't take as many coats because the surface is smoother to start with. But 9/10 we want a patchy/faded beat up appearance so that feature of the paints can be used as an advantage... I do love tamiya too, but find them too matt sometimes, because for good looking decals you need to gloss prior, and it can take alot of gloss sometimes to smooth out rough matt tamiya paints.... 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now