Jump to content

3d print: Ford Escort MK1 in 1/12 scale


Recommended Posts

  • 2 weeks later...
6 hours ago, Noel Smith said:

The Mk2 has not got much appeal

 

I like the Mk2 much more than the Mk1 Lotus 'tina! Came very close in the early 80's to buying one in a lovely duck egg blue colour I hadn't seen before (or since!) Then I got an insurance quote - over twice what I was paying on a stage rally prepared Escort with a more powerful engine!! 

 

Keith

  • Like 1
Link to comment
Share on other sites

Keith,     I was very happy with my MK2 Lotus Cortina. It was a bit unusual as the first owner had an additional fuel tank fitted in the boot. My car was coloured Silver Fox overall. The reg no was ORX 44 F.

I tried the Lotus Cortina register to see if the car was still about but they could not identify through a reg no and asked if I knew the chassis number. Still don't know if the car still exists or is long gone.

 

The reason I mentioned about the MK1 is that I simply think it would be more desirable as a model kit than a Mk2. 

  • Like 1
Link to comment
Share on other sites

Regarding the Mk 1, a guy in South Africa made a resin kit in 1/24th scale some years back.

 

Ian Knott from the Motor Museum In Miniature who have done many of the shows in the UK built one and displayed it doing the rounds.

Ian and his dad Rod, were inspired to actually produce their own Mk 1 resin  kit in 1/24th scale, and they also make a Morris Minor Saloon kit too.

 

It may be only a little time before Belkits might have a go at a Mk1 Lotus Cortina. They have done rally versions of the Mk1 Escort so who knows?

 

Just recently I have restored an old Airfix Lotus Cortina that was badly customised by me way back when the kits were easy to get hold of, and my modelling skills were shall we say 'a bit lacking'!

  • Like 1
Link to comment
Share on other sites

13 hours ago, Noel Smith said:

It may be only a little time before Belkits might have a go at a Mk1 Lotus Cortina. They have done rally versions of the Mk1 Escort so who knows?

 

 

I'd rather they did a properly shaped Mk2 Escort!! :)

 

I bought a resin Mk1 Cortina and Anglia bodyshells from a UK dealer on ebay. Bit rough but usable I think.

 

Sorry Christian for the thread drift!

 

Keith

Link to comment
Share on other sites

  • 2 weeks later...

No need to worry about hijacking this tread! 

An MK2 is also a great looking car in my eyes.

 

In addition to other projects, I've been working on the escort lately.

In addition to the racing version, a rally version has now also been created.

2xescortw6jmy.jpg

2xescort2amj2p.jpg

2xescort3xukf7.jpg

2xescort4cejnf.jpg

The rally parts are still only available in CAD, but I will soon be able to show the real vehicle.

Greeting Christian

  • Like 7
Link to comment
Share on other sites

Thanks for your reply.
Yes the rallye version was running without a spoiler.
My plans did not include an rallye escort until a guy ask about it.

He wanted that minilite style rims and i included some street tires for him.Next step was the higher suspension and than some front and rear bumpers too.

Thats all.

Did not want to make a second body shell for it.I think every modeller who is willing to build a resin printed model has the skills to use a sanding stick and some putty to sand the spoiler in the right shape.

It was only a customer question about rims. The spoiler i put on the Mk1 are from an Escort Mk2 version. "Dont say that to anyone,please" 😇

 

regards Christian

  • Like 2
Link to comment
Share on other sites

  • 3 months later...

Hello,
a long time has passed but I finally finished the two prototypes.

 

k1600_img202208211106wpid1.jpg
k1600_img202208211107tofel.jpg

 

Racing version of the Escort MK1

k1600_img202208211108zofux.jpg
k1600_img202208211109gpia3.jpg
k1600_img20220821111003f1u.jpg
k1600_img202208211110nxizt.jpg
k1600_img202208211111vwdgz.jpg

 

and the Rally version of the Escort

k1600_img202208211112k9dwd.jpg
k1600_img2022082111149wfoh.jpg
k1600_img202208211114z4ii5.jpg
k1600_img202208211115ajina.jpg
k1600_img2022082111153bir1.jpg
k1600_img2022082111152nf1t.jpg

 

all parts are 3d printed and of course vac-formed windows  are included.
Everything can also be ordered on my website if you want.

Thanks very much!

  • Like 8
Link to comment
Share on other sites

16 hours ago, keefr22 said:

Those really are beautiful Christian, the rally car so reminds me of a couple of real ones I once owned! 

 

Unfortunately money is tight at the moment, maybe if I can sell some models on e-bay..... :hmmm:

 

Keith

Same here Keith, would need to clear some stash funds first, especially if I want to avoid an entanglement with the Domestic Authorities 😉

They do look lovely and would be a great addition to anyone's display,  the Mk2 sounds very interesting too.

Great, no, amazing work.

Chris

  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...