Borez Posted March 12, 2017 Author Share Posted March 12, 2017 On 11/03/2017 at 10:30 AM, afv_rob said: Great work Borez! I've been quietly watching your progress and making a few notes along the way. I've got the MFH 917-023 1972 LM winning car and haven't yet plucked up the courage to start building (as you can guess from my username, until now I've been exclusively an armour modeller). Good tip on the fuel line wire as well, I've been looking for something suitable for a pair of Hasegawa Ferrari 312s I've bought. I eagerly await your next update. P.S. here are some photos I took of various 917s at last years Goodwood Members meet: And their track rivals, the Ferrari 512: Superb pictures there mate. Makes we want to build the Ferrari 512S too. I know MFH did a kit of this car but it looks like it's now discontinued. 1 Link to comment Share on other sites More sharing options...
afv_rob Posted March 13, 2017 Share Posted March 13, 2017 My pleasure Borez. I'd love a kit of the 512 as well but I think alas it's long OOP, there was a chap on another forum selling some cheap as chips this weekend past, but it looks like they all got snapped up. 1 Link to comment Share on other sites More sharing options...
Borez Posted March 13, 2017 Author Share Posted March 13, 2017 (edited) 13 minutes ago, afv_rob said: My pleasure Borez. I'd love a kit of the 512 as well but I think alas it's long OOP, there was a chap on another forum selling some cheap as chips this weekend past, but it looks like they all got snapped up. Was that the Modellismo stash? I caught the facebook thread Sun morning on my way back from work at 4am, went to buy but was too late. Opportunity missed and then some. Edited March 13, 2017 by Borez Link to comment Share on other sites More sharing options...
Borez Posted March 16, 2017 Author Share Posted March 16, 2017 (edited) I apologise for the lack of updates, I'm a little busy working at the minute so I'm getting bits in when I can. So... first off this from MFH. ( New velocity stacks ) MFH have been great with sending stuff out. The velocity stacks were not quite as fragile as the last lot, although still extremely fragile to remove from the sprue. Now fitted to the MFH though. And the wiring on the Fujimi transkit is now complete too. To get the top section of the transkit to fit though was a night in the vice and epoxy. For anyone building this transkit in the future, be warned, this top section is not easy to fit at all. It's just slightly too small to go over the top of the air intakes. In other words, its a PITA to fit. Anyway I got it fitted and then it was time to wire in the fuel lines. They still need a tidy here and there , but they're all in. Some detailing on the fan using an oil wash to give it that dirty raced look. ( my first experiment with oil washing really, much nicer effect than acrylic washing I'm thinking ) And fitted ( air intakes still need aligning here ) And a couple more shots of the wired engine And then a test fit of the exhausts. Refreshing after the utter drama with the MFH exhausts that these things literally just drop in no bother at all. And a first real look at the two engines together. For anyone who's interested. Where it says frame in the last pic, it's basically so I don't forget that the Fujimi frame I scratched is all sitting under the cutting mat keeping it flat. I must admit though that halfway though the second engine I was like, so whose stupid idea exactly was it to build two 1/24th 917 engines at the same time? Porsche definitely weren't thinking about modellers when they designed this 12 cylinder beast. that's for sure But, I think it was worth the effort. Just got to build two cars around them now. So yeah, just a few more bits and pieces to complete the Fujimi engine and I'm going to look at dropping the MFH engine into its completed frame and then building up the Fujimi frame ( which is mostly scratched already ) for the transkit engine to fit into. Thanks for looking in. Edited March 16, 2017 by Borez 10 Link to comment Share on other sites More sharing options...
Spookytooth Posted March 16, 2017 Share Posted March 16, 2017 What a lovely pair Borez Fnar Fnar. They both look works of art mate. The oil washes are the way to go, I use a lot when weathering etc. Looking forward to your next update. Simon. 1 Link to comment Share on other sites More sharing options...
Borez Posted March 16, 2017 Author Share Posted March 16, 2017 (edited) 4 hours ago, Spookytooth said: What a lovely pair Borez Fnar Fnar. They both look works of art mate. The oil washes are the way to go, I use a lot when weathering etc. Looking forward to your next update. Simon. Thanks mate. I've been really wary of oil washes before, people talk of the thinners ruining acrylic paint but I had no problems in the few tests I did. They're definitely they way forward for bringing up detail and way easier than the acrylic washes that give a powdery finish once dry. I'm sold really, especially for oily engine parts. Edited March 16, 2017 by Borez 2 Link to comment Share on other sites More sharing options...
silver911 Posted March 17, 2017 Share Posted March 17, 2017 A tip for using oil washes.....after a time they will go flat...once the thinner has evaporated and the 'oil' in the paint has fully dried...so...if your looking to retain a sheen...use a couple of drops of satin varnish (enamel) in your wash Ron 1 Link to comment Share on other sites More sharing options...
Borez Posted March 21, 2017 Author Share Posted March 21, 2017 (edited) Bit of a pic heavy post this one but photo shoot of the now completed engines together. Right, now to build the rest of the two cars. Thanks for looking in. Edited March 21, 2017 by Borez 6 Link to comment Share on other sites More sharing options...
Schwarz-Brot Posted March 21, 2017 Share Posted March 21, 2017 So beautiful. Works of art, even without the cars around them. Perfect photography as well. Both thumbs up! The Transkit quality is quite impressive compared to the MFH one where top notch quality is a must. 1 Link to comment Share on other sites More sharing options...
Borez Posted March 21, 2017 Author Share Posted March 21, 2017 7 minutes ago, Schwarz-Brot said: So beautiful. Works of art, even without the cars around them. Perfect photography as well. Both thumbs up! The Transkit quality is quite impressive compared to the MFH one where top notch quality is a must. Thanks mate, the photography was quite difficult in the fact that the mirror finish black plastic base attracts and shows up every single spec of dust and my loft studio is quite a dusty environment to start with. I could only get a few shots off before it just looked awful and needed cleaning again. You can see the bits in some of the photos. I mean, I could shop them out but I'd be on all day The transkit detail is not as nice as the MFH up close, but it's a really nice kit regardless. Apart from a few fitting issues I had with it I'm really pleased. Link to comment Share on other sites More sharing options...
shood23 Posted March 21, 2017 Share Posted March 21, 2017 Jeez I can only second what's been said. Those engine look top notch. And it is easily noticeable which is which now, the mfh one just has so much more minute detail than the hrm one. Shaun 1 Link to comment Share on other sites More sharing options...
Spookytooth Posted March 21, 2017 Share Posted March 21, 2017 Borez , I can only echo the sentiments from above, fantastic work, true museum pieces in their on right. One thing I would of done was to dirty up the inside of the tail pipes a little, but as a factory fresh, spot on. Simon. 1 Link to comment Share on other sites More sharing options...
Borez Posted March 21, 2017 Author Share Posted March 21, 2017 (edited) 2 minutes ago, Spookytooth said: Borez , I can only echo the sentiments from above, fantastic work, true museum pieces in their on right. One thing I would of done was to dirty up the inside of the tail pipes a little, but as a factory fresh, spot on. Simon. I may actually do this yet with a bit of black oil paint. For sure. Edited March 21, 2017 by Borez 1 Link to comment Share on other sites More sharing options...
Spookytooth Posted March 21, 2017 Share Posted March 21, 2017 14 minutes ago, Borez said: I may actually do this yet with a bit of black oil paint. For sure. Sorry Borez, I did not want to look picky or anything. Try Tamiya`s weathering powders if you can get it inside the pipes. Simon. 1 Link to comment Share on other sites More sharing options...
PC2012 Posted March 21, 2017 Share Posted March 21, 2017 Absolutely beautiful work Borez 1 Link to comment Share on other sites More sharing options...
Pouln Posted March 22, 2017 Share Posted March 22, 2017 They both are looking great. Funny that the dimensions and details of the gearbox differ that much. Well done and very nicely photographed. 1 Link to comment Share on other sites More sharing options...
Borez Posted March 22, 2017 Author Share Posted March 22, 2017 Thanks for all the kind words people. Now onto part two... the cars themselves. 1 Link to comment Share on other sites More sharing options...
Borez Posted March 22, 2017 Author Share Posted March 22, 2017 OK, now the engines are pretty much done it's on to part 2. First off, mating the engine with the rear frame. I mean, talk about tight fit, but I have rehearsed this several times over the course of the build so basically it went straight in no bother at all. Didn't even scratch the paint So frame meet engine, engine meet frame. And a test of the firewall/bulkhead Now, the next bit I was worried about. Basically I stupidly dropped the engine from some height a week or so ago ( another victim of working late into the night ) and it was saved by landing on this little tab. The tab snapped completely off but totally saved the engine from any damage ( very lucky really, I didn't even want to look on the floor ) As I had to epoxy the tab back on ( it's the main aligning connection between the whole engine mounting and the front of the car ) I was pretty worried that it would no long line up squarely. But luckily it lines up no problem. Note to self: be more bloody careful please!! I've already tested the fitting and tapped the threads weeks ago for this and also the screws that go though the firewall into the front section, so it's just a matter of screwing it all in now. Here's a test fit of the parts together. ( the tab is slightly raised here, but that's because the engine sits back onto the firewall a little. Thankfully it all fits well. ) I'm thinking ( in my plan of action ) that it would probably be a good idea to detail the firewall before I go any further with joining these parts up. So that's next on my to do list. Plus look at painting and assembling the Fujimi frame for the HRM engine. And that's it for now. Thanks for looking in. 7 Link to comment Share on other sites More sharing options...
shood23 Posted March 22, 2017 Share Posted March 22, 2017 Looking great borez. I must say I am still stunned at how porsche managed to squeeze this big 12 cylinder into that little space in the framework. Watching the gunnar racing videos on YouTube it just looks way too big even when they get it out. Shaun 2 Link to comment Share on other sites More sharing options...
Borez Posted March 22, 2017 Author Share Posted March 22, 2017 11 minutes ago, shood23 said: Looking great borez. I must say I am still stunned at how porsche managed to squeeze this big 12 cylinder into that little space in the framework. Watching the gunnar racing videos on YouTube it just looks way too big even when they get it out. Shaun I hear that. I'm also stunned to be honest with how thin and flimsy the original cars frame is compare to that power unit in the back, it literally is a shopping trolley with a whopping great flat 12 engine strapped in the back with nothing but a very thin fibreglass covering for protection. Especially when you consider that your feet were dangling over the front axle at 240mph. The more you read and the more you look at this car the more you realise it is just an utter deathtrap. The men who drove this thing must have had some very large cojones. 1 Link to comment Share on other sites More sharing options...
shood23 Posted March 22, 2017 Share Posted March 22, 2017 31 minutes ago, Borez said: I hear that. I'm also stunned to be honest with how thin and flimsy the original cars frame is compare to that power unit in the back, it literally is a shopping trolley with a whopping great flat 12 engine strapped in the back with nothing but a very thin fibreglass covering for protection. Especially when you consider that your feet were dangling over the front axle at 240mph. The more you read and the more you look at this car the more you realise it is just an utter deathtrap. The men who drove this thing must have had some very large cojones. Yeah I was looking into the frame bar thicknesses not long ago (for a future project hopefully) and I think I remember seeing that the thickness rod was about 1 and a half inches thick and the original roll hoop was too thin to withstand anything so they were forced to make changes in 71 I believe. When you talk about driving this beast at 240 down the mulsanne for the life of me I can't even figure out how the drivers got in the cars with cojones that big lol. Shaun 2 Link to comment Share on other sites More sharing options...
Spookytooth Posted March 22, 2017 Share Posted March 22, 2017 Everything looks OK from here Borez. Looking forward to more updates. Simon. 1 Link to comment Share on other sites More sharing options...
Hamden Posted March 23, 2017 Share Posted March 23, 2017 Those engines look great, the snugness of frame fit is exemplary Roger 1 Link to comment Share on other sites More sharing options...
Borez Posted March 27, 2017 Author Share Posted March 27, 2017 OK, back from another weekend working. Whilst I wait for some paint to be delivered so I can get on with the MFH firewall I thought I'd return today to the scratch built Fujimi rear engine frame and get it up to the same level as the MFH. Out came the sections I'd already built for a quick test fit to remind me of where I was with this and how it was all going to eventually fit together. Rear firewall section and one side of the engine cage. And then a test fit with the Fujimi top section around the engine. As with the MFH frame it's very snug but the engine does fit. Then some extra detailing on the frame sides. Also added a bolt to the cross brace on both frames. Then Plastiwelded the sides to the firewall section making sure it was all square. Added the cross-braces. And then a test fit with the engine and rear engine mounting plate. So far so good. The top of the frame will be completed by a Fujimi part shown below which also holds the rear engine mounting plate, spare wheel and rear down vents. And then another test fit of the frame in the chassis. And a side by side with the MFH frame. And finally a test fit of the frame with rear engine mounting plate and the Fujimi top. My original intention was to build the frame so it purposely lifts out the chassis as one section for spraying and detailing and it's worked out pretty nicely if I do say so myself. All that remains is to add a few more details, clean up the plastiweld residue, weld it all together, prime and paint. Pretty pleased with this progress. Good afternoons work really. Thanks for looking in. 3 Link to comment Share on other sites More sharing options...
Spookytooth Posted March 27, 2017 Share Posted March 27, 2017 Some very fine scratch work going on there Borez. Great to see that it all lines up OK. Simon. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now