wellsprop Posted February 6, 2022 Author Posted February 6, 2022 6 hours ago, Britman said: Ben, I sent you a PM. Did you get it? Keith Affirm and replied 1
mike romeo Posted April 3, 2022 Posted April 3, 2022 Hi Ben, I'd have 1 of these too. I'll send you a pm. Rgds Martin 1
bigbadbadge Posted April 18, 2022 Posted April 18, 2022 Hi Ben I am not sure if you have been asked but are you considering any work on the Aussie FB.31 with the large underside intakes and nose blister? Chris
G.E.SAUNDERS Posted April 18, 2022 Posted April 18, 2022 hi All , the small (2) Intake Ducts on a RAAF Vampire were called "Elephant Ears ". " They were 1st located on top of the Fuselage behind the Canopy then relocated underneath as that position was more efficient Airflow to the Engine . The Black Bump on the Nose of the Jet. ?........welllll ! ......... that was the Radar Housing . cheery "Modellin' " mumbas ! Geoff 1
wellsprop Posted April 20, 2022 Author Posted April 20, 2022 On 18/04/2022 at 11:46, bigbadbadge said: Hi Ben I am not sure if you have been asked but are you considering any work on the Aussie FB.31 with the large underside intakes and nose blister? Chris Hi Chris, the FB.31 is in work, the CAD intakes are complete, I need to test print them and then make any adjustments. I've possibly overlooked the nose blister, I will have to look into this. On 18/04/2022 at 12:49, G.E.SAUNDERS said: hi All , the small (2) Intake Ducts on a RAAF Vampire were called "Elephant Ears ". " They were 1st located on top of the Fuselage behind the Canopy then relocated underneath as that position was more efficient Airflow to the Engine . The Black Bump on the Nose of the Jet. ?........welllll ! ......... that was the Radar Housing . cheery "Modellin' " mumbas ! Geoff Ah I didn't realise the intakes moved below, have you got any photos or drawings showing the nose bump? Cheer Ben 1 1
bigbadbadge Posted April 20, 2022 Posted April 20, 2022 24 minutes ago, wellsprop said: Hi Chris, the FB.31 is in work, the CAD intakes are complete, I need to test print them and then make any adjustments. I've possibly overlooked the nose blister, I will have to look into this. Ah I didn't realise the intakes moved below, have you got any photos or drawings showing the nose bump? Cheer Ben Hi Ben that is brilliant, thank you, I will definitely buy set . There are some great images on Airliners.net and a close up shoeing the nose bump online by Brett Green I am unsure of copyright issues re posting here so a bit weary. Chris 1 1
bigbadbadge Posted August 19, 2022 Posted August 19, 2022 Hi Ben I hope you are well. Just checking I to see how the FB.31 bits are going, are they still going ahead ? Hope I am not being too pushy here. Just keen!!! Thanks Chris
wellsprop Posted August 29, 2022 Author Posted August 29, 2022 On 19/08/2022 at 12:15, bigbadbadge said: Hi Ben I hope you are well. Just checking I to see how the FB.31 bits are going, are they still going ahead ? Hope I am not being too pushy here. Just keen!!! Thanks Chris The extra intakes are complete and I'm currently working on the nose (which is proving a tad harder). 1
bigbadbadge Posted August 30, 2022 Posted August 30, 2022 7 hours ago, wellsprop said: The extra intakes are complete and I'm currently working on the nose (which is proving a tad harder). Thanks Ben, hope the nose blister isn't too much of a pain. Chris
wellsprop Posted October 19, 2022 Author Posted October 19, 2022 Topics merged, Vampire FB6 FB30/31 added, soon to be for sale. Seamless 3D printed resin exhaust soon to be added. 3
bigbadbadge Posted October 21, 2022 Posted October 21, 2022 Now this is very exciting news, looking forward to to this. Thanks Ben Chris
wellsprop Posted October 28, 2022 Author Posted October 28, 2022 FB6 now available! https://www.facebook.com/100063442167079/posts/pfbid031hLUuAZWxB9VtAdwSr1gvH7qN5kZ2XSQyP5SmNMZp1nFVix2oeU7xbyVVqHgWHYZl/ 1 1
bigbadbadge Posted October 30, 2022 Posted October 30, 2022 Nice looking set Ben, great work, looking forward to the FB.31 set. Chris 2
bigbadbadge Posted January 5, 2023 Posted January 5, 2023 Hi Ben Hope you're well. Happy New year, hope you don't think I am a pain, is there any more news on the FB.31 conversion yet? Thanks Chris
wellsprop Posted January 15, 2023 Author Posted January 15, 2023 On 16/11/2022 at 22:25, dadgaddad said: Did somebody say . . . Sea Vampire? 🤔 WiP - slightly stalled! On 05/01/2023 at 15:03, bigbadbadge said: Hi Ben Hope you're well. Happy New year, hope you don't think I am a pain, is there any more news on the FB.31 conversion yet? Thanks Chris The final prototype parts went on the printer half an hour ago! 😀 2 1
bigbadbadge Posted January 15, 2023 Posted January 15, 2023 59 minutes ago, wellsprop said: WiP - slightly stalled! The final prototype parts went on the printer half an hour ago! 😀 Brilliant news, thanks Ben . Very exciting. Chris
Homebee Posted January 28, 2023 Posted January 28, 2023 (edited) What about a Sea Vampire F.20 conversion set ? Basically a navalised FB.5 "The Sea Vampire had several key differences from their land-based counterparts. It could be easily distinguished by the presence of a V-shaped arrester hook that retracted to a high-mounted position above the jet pipe. The Sea Vampire was fitted with enlarged air brakes and landing flaps for superior low-speed control during landing approaches, along with stronger construction for the higher stresses involved in carrier landings and catapult launches." Regards V.P. Edited January 28, 2023 by Homebee 1
wellsprop Posted January 28, 2023 Author Posted January 28, 2023 @Homebee I've been working on it the shape has been corrected, but it's not clear how the flaps need modifying, or how the arrestor hook attaches. 1
gunzo Posted February 5, 2023 Posted February 5, 2023 On 1/28/2023 at 11:45 PM, wellsprop said: it's not clear how the flaps need modifying, or how the arrestor hook attaches. Aren't these mods present on the FAA Museum Sea Vampire?
wellsprop Posted February 6, 2023 Author Posted February 6, 2023 17 hours ago, gunzo said: Aren't these mods present on the FAA Museum Sea Vampire? They are, I have a lot of photos of it from when I went last! 1
bigbadbadge Posted February 6, 2023 Posted February 6, 2023 Hi Ben, How are the FB.31 conversions coming on ??? Chris
wellsprop Posted February 20, 2023 Author Posted February 20, 2023 On 06/02/2023 at 19:23, bigbadbadge said: Hi Ben, How are the FB.31 conversions coming on ??? Chris Now complete! The nose bulge failed to print but I've added some larger supports and it prints fine. Ill have some photos this weekend (hopefully) and they'll be available very shortly. 1
bigbadbadge Posted February 20, 2023 Posted February 20, 2023 That's Brilliant news thanks Ben. Looking forward to seeing the photos. Chris
wellsprop Posted March 29, 2023 Author Posted March 29, 2023 On 20/02/2023 at 23:18, bigbadbadge said: That's Brilliant news thanks Ben. Looking forward to seeing the photos. Chris Everything has been printed now! Photos this weekend and (hopefully) on sale too 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now