825 Posted April 2, 2021 Share Posted April 2, 2021 I picked up this CMR Seafire a while ago when the only way to make a Seafire in 1:72 was to convert a Spitfire kit or one of CMR's resin kits. I've a few in the stash and some have been built but then Admiral, Sword and AZ Models all introduced injection moulded Seafires, and almost every Seafire Mark is available IM. So the resin kits have been left sitting in their bags. Which is a shame as they're accurate, nicely moulded and well engineered. And unlike some resin ranges they're not all that challenging to build. This build is therefore not something a bit esoteric like my Parnall Plover but more mainstream but one can never have too many Seafires. At some point I started the kit by putting some paint on the interior bits, and presumably giving it a thorough wash in my ultrasonic cleaner. Nothing's off the moulding blocks and cyano hasn't come near so it's well below the 25% already built. Here are the parts, all nice and fine and with a one piece wing, optional filters and an external tank. CMR's instructions are good and there's livery options for three aircraft. Although the colour call out for the 885 NAS aircraft is a bit strange. I'll probably go for the 880 NAS option as I've actually got a couple of Seafires finished in the other options that I built in the Spitfire/Seafire GB. Fairly straightforward transfer sheet and probably he most challenging part for me but thankfully there's two, a vac form canopy. The build will be out of the box (bag?) with the addition of seat belts. If I have a spare IM canopy that fits in the stash I might use that instead of spending hours swearing at a tiny piece of vac form. 4 Link to comment Share on other sites More sharing options...
825 Posted April 10, 2021 Author Share Posted April 10, 2021 The cyano was out this morning so the Seafire was addressed. Fuselage glued together, after first checking the cockpit can be inserted from below, the cockpit assembled and the radiator and oil cooler added to the underside of the wing. I'll let everything cure up and then tidy up the fuselage joint which will need a small amount of work. Seat belts to be added and the cockpit can be inserted. 7 Link to comment Share on other sites More sharing options...
Adam Poultney Posted April 10, 2021 Share Posted April 10, 2021 This one looks interesting Link to comment Share on other sites More sharing options...
825 Posted April 11, 2021 Author Share Posted April 11, 2021 19 hours ago, Adam Poultney said: This one looks interesting Thanks Adam, CMR do a nice range of resin Seafires, which are relatively straightforward to build, this is an earlier one and needs a little bit of care, but no more challenging than a short range injection moulded kit. Ive added some seatbelts, Kity Hawk 3D printed decals, which are new for me. Went on OK but needed a little bit of work. I didn't use all the bits just enough to give the impression of seat belts. The Seafire cockpit is quite small and tight and not much can be seen once the canopy is on. 6 Link to comment Share on other sites More sharing options...
825 Posted April 15, 2021 Author Share Posted April 15, 2021 Another burst of cyano activity has led to the cockpit inserted, the wings on and the tailplane s on. Looks like a Seafire now. I did a bit of fettling to get the wings on right but there's still some seams that need filling. There will also be a bit of work at the wing root rear that will be needed but bit by bit I'll get there. 3 Link to comment Share on other sites More sharing options...
825 Posted April 27, 2021 Author Share Posted April 27, 2021 All the filling done and the lower surfaces painted Sky, then masked for some paint on the upper surfaces. Brush painted with Xtracrylix thinned with Flow Improver. Masking removed and demarcation on the fuselage is fine but the leading edges will need a bit of work and probably re-done. 7 Link to comment Share on other sites More sharing options...
825 Posted May 1, 2021 Author Share Posted May 1, 2021 Paint tidied up and because putting the transfers on will mean a fair bit of handling and the next set of parts are quite delicate I decided to get the transfers on now. I feel they bring an airframe to life. The CMR transfers handled well despite their age. I did have some problems with a couple of the wing walkway lines breaking up but they were easily sorted out. Now to clean off any adhesive and I'll set about getting a couple of coats of matt varnish on before adding the detail. And the canopy. 5 Link to comment Share on other sites More sharing options...
AdrianMF Posted May 1, 2021 Share Posted May 1, 2021 Looks very nice in TSS! Regards, Adrian Link to comment Share on other sites More sharing options...
Mjwomack Posted May 1, 2021 Share Posted May 1, 2021 4 hours ago, 825 said: I feel they bring an airframe to life. They have that. Really looks the business Link to comment Share on other sites More sharing options...
825 Posted May 1, 2021 Author Share Posted May 1, 2021 7 hours ago, AdrianMF said: Looks very nice in TSS! Regards, Adrian TSS is definitely the best looking Scheme for early Mark Seafires. 5 hours ago, Mjwomack said: They have that. Really looks the business Thanks, the markings are simple, like most active duty Seafires but they do bring the plane to life. I've got a coat of matt varnish on now but no photos as a couple will probably be needed. Link to comment Share on other sites More sharing options...
Grey Beema Posted May 2, 2021 Share Posted May 2, 2021 Lovely finishing there 825. On the last leg now.. Link to comment Share on other sites More sharing options...
825 Posted May 2, 2021 Author Share Posted May 2, 2021 8 hours ago, Grey Beema said: Lovely finishing there 825. On the last leg now.. Thanks GB. Finished the varnishing so it'll be on to assembling the prop and undercarriage when I break out the cyano next. I'll start on the canopy next as it'll take a wee bit of time to cut out of the vac form sheet. 2 Link to comment Share on other sites More sharing options...
825 Posted May 9, 2021 Author Share Posted May 9, 2021 Undercarriage on, as well as spinner assembly. The undercarriage was simple to assemble and feels deceptively strong. The exhausts broke up when trimming the excess resin off. I found a replacement pair in my box of bits left over from other Seafire builds. It's a bit of a juxtaposition using IM exhausts on a resin kit rather than the other way round. I thoughts I'd lost the prop blades and had found spare prop parts but they turned up. Cannon on too but one has lost the very fine end. 2 Link to comment Share on other sites More sharing options...
825 Posted May 15, 2021 Author Share Posted May 15, 2021 Most parts on and some touching up in process. A little work to do, the canopy on, the aerial mast and pitot tube fixed, and that'll be the Seafire finished. 5 Link to comment Share on other sites More sharing options...
825 Posted May 30, 2021 Author Share Posted May 30, 2021 Canopy masked and trimmed to fit and popped on. You can't see it at the moment but I found a gunsight in my box of Seafire/Spitfire bits along with an IM canopy. I've no idea about the make or provenance but the trimming to fit was a lot easier than the vac form in the kit. I know the vac form will be clearer and probably a bit more accurate but to be honest life's too short. 4 Link to comment Share on other sites More sharing options...
825 Posted May 31, 2021 Author Share Posted May 31, 2021 Canopy faired in, painted and given an initial coat of matt varnish. I'll let it dry and pop on a second coat before removing the masking. 2 Link to comment Share on other sites More sharing options...
825 Posted June 2, 2021 Author Share Posted June 2, 2021 Canopy unmasked and the last two bits glued on. Just a bit of paint and varnish to complete and it'll be ready for the gallery. 3 Link to comment Share on other sites More sharing options...
825 Posted June 7, 2021 Author Share Posted June 7, 2021 Finished and ready for the gallery. 4 Link to comment Share on other sites More sharing options...
Mjwomack Posted June 7, 2021 Share Posted June 7, 2021 Absolutley love the carrier deck- is it something as simple as kitchen towel or cost a fortune from an obscure website? I'll believe either answer. PS love the model as well😃 Link to comment Share on other sites More sharing options...
825 Posted June 7, 2021 Author Share Posted June 7, 2021 12 hours ago, Mjwomack said: Absolutley love the carrier deck- is it something as simple as kitchen towel or cost a fortune from an obscure website? I'll believe either answer. PS love the model as well😃 I'd love it if I were to have the skill to knock up something from paper towel, but it's one of Coastal Kits bases and backgrounds. They do a whole range of bases https://www.coastalkits.co.uk/newstore/carrier-decks/1-72-scale-carrier-decks.html?page=all not just carrier decks. They're not cheap but they're really nice and the fact I use them over and over again for photography gives value for money. PS, thanks for the comment on the model. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now