Jherek Posted April 2, 2014 Share Posted April 2, 2014 Ok preshading has been done but I have a problem to make thin line I don't know if that was a paint problem or pressure or me?? so it was fail! but I will cover that later so maybe it will turn ok thin line = low psi - I use 10 + spray close to the model and make sure the airbrush is clean to start with. It will be fine, but practise the thin lines/ mottling on plastic card first... 1 Link to comment Share on other sites More sharing options...
Pawel Szczudlyk Posted April 2, 2014 Author Share Posted April 2, 2014 Check in those books I sent you? Hi not yet but I will do this tomorrow I hope Thanks again Link to comment Share on other sites More sharing options...
Pawel Szczudlyk Posted April 5, 2014 Author Share Posted April 5, 2014 Hello again from last few days I was do some painting Masking and painting was fun but unmasking was like opening Christmas present This one is made after RLM83 layer The bottom is well protected On this one I was painting yellow parts using humbroll 154 And the result so far Now I need to paint black and white stripes on the end of the fuselage and add some red here and there plus few mottling spots to be continued... 3 Link to comment Share on other sites More sharing options...
snapper_city Posted April 5, 2014 Share Posted April 5, 2014 That's looking tasty. 1 Link to comment Share on other sites More sharing options...
PlaStix Posted April 5, 2014 Share Posted April 5, 2014 That is coming along very nicely. The pre-shading has worked well. 1 Link to comment Share on other sites More sharing options...
Pawel Szczudlyk Posted April 5, 2014 Author Share Posted April 5, 2014 That is coming along very nicely. The pre-shading has worked well. Thank you.I'am quite happy about pre shading as well. 1 Link to comment Share on other sites More sharing options...
Jherek Posted April 5, 2014 Share Posted April 5, 2014 Love the masking! That's looking great now! 1 Link to comment Share on other sites More sharing options...
Pawel Szczudlyk Posted April 5, 2014 Author Share Posted April 5, 2014 Love the masking! That's looking great now!Thanks ... And I have sort the problem whith my airbrush so now I can Do thin lines Link to comment Share on other sites More sharing options...
mick Posted April 6, 2014 Share Posted April 6, 2014 great work on the camo 1 Link to comment Share on other sites More sharing options...
Pawel Szczudlyk Posted April 6, 2014 Author Share Posted April 6, 2014 Hi again so quick update.I have finish painting and now it is time to put some clear varnish before applying decals. And I have to start doing now all the small bits like landing gear etc. ok have a nice day chaps 3 Link to comment Share on other sites More sharing options...
Pawel Szczudlyk Posted April 12, 2014 Author Share Posted April 12, 2014 (edited) hi all again So we have weekend now and after work I want to continue work with my dora 2 days ago I have put coat of clear varnish and today I have start to put decals on...and this was big disaster I don't know what was the problem but decals was very fragile. I broke some of them (I am happy that I have some spares)....Grrr poo-poo! so I finish this job for today and will continue tomorrow. take care guys Edited April 12, 2014 by sdk_uk 2 Link to comment Share on other sites More sharing options...
PlaStix Posted April 12, 2014 Share Posted April 12, 2014 What a shame about the decals. Good job you've got spares. Anyway it's still looking excellent - keep going! 1 Link to comment Share on other sites More sharing options...
Pawel Szczudlyk Posted April 16, 2014 Author Share Posted April 16, 2014 Hello guys finally I have made some progress on this one. All decals are on place right now(except the spinner).I have apply a coat of klear and I wait for tomorrow to start make some weathering. I will do oil wash for this one ok Have a nice day all 3 Link to comment Share on other sites More sharing options...
mick Posted April 16, 2014 Share Posted April 16, 2014 excellent 1 Link to comment Share on other sites More sharing options...
snapper_city Posted April 16, 2014 Share Posted April 16, 2014 Nice. What are the troops behind it? 1 Link to comment Share on other sites More sharing options...
Wolwe82 Posted April 16, 2014 Share Posted April 16, 2014 very nice, i did not see this in the progress time, but i like the seat belts. And wonder what your wife said, when you did raid the kitchen for the aluminium sheet for masking 1 Link to comment Share on other sites More sharing options...
PlaStix Posted April 16, 2014 Share Posted April 16, 2014 That's looking good with the decals on. Great stuff! 1 Link to comment Share on other sites More sharing options...
Pawel Szczudlyk Posted April 16, 2014 Author Share Posted April 16, 2014 Hi Snapper the troops behind are my part crew of German antitank gun. This is my first build that is not an airplane , and my first figures. Can you tell me what varnish should I put on figures and gun? Matt on gun and satin on germans?And I need to think about dio base for this as well Sorry for OT 1 Link to comment Share on other sites More sharing options...
Pawel Szczudlyk Posted April 16, 2014 Author Share Posted April 16, 2014 very nice, i did not see this in the progress time, but i like the seat belts. And wonder what your wife said, when you did raid the kitchen for the aluminium sheet for masking Shhh she doesn't know that I nicked that foil from her Thank you Plastix 1 Link to comment Share on other sites More sharing options...
snapper_city Posted April 17, 2014 Share Posted April 17, 2014 I nearly always use matt as a final varnish on figures and land vehicles. That is looking good. I can't really help with the dio base as I have only ever done one.. 1 Link to comment Share on other sites More sharing options...
Pawel Szczudlyk Posted April 19, 2014 Author Share Posted April 19, 2014 ok time for a small update nearly done... Happy Easter folks 2 Link to comment Share on other sites More sharing options...
Pawel Szczudlyk Posted April 20, 2014 Author Share Posted April 20, 2014 And I call this one DONE I have done weathering using Hunbrol pigments and oil wash... I will put more photos in gallery later I would like to thank all of you for support and advice. Cheers.... ps I think that I will stay with this scale 1/48 when I will be making next fighter ps2 I have to learn to make better pictures 4 Link to comment Share on other sites More sharing options...
Jherek Posted April 20, 2014 Share Posted April 20, 2014 Great stuff! well done! great finish! 1 Link to comment Share on other sites More sharing options...
Pawel Szczudlyk Posted April 20, 2014 Author Share Posted April 20, 2014 Great stuff! well done! great finish!thank you sir Link to comment Share on other sites More sharing options...
snapper_city Posted April 20, 2014 Share Posted April 20, 2014 Great finish. That's looking really smart. 1:48 is the way forward with WWII fighters... 1 Link to comment Share on other sites More sharing options...
Recommended Posts