Search the Community
Showing results for tags 'Cruiser'.
Found 4 results
This is my build of HMS Belfast as she was at the sinking of the Scharnhorst in December 1943, she sits in my collection alongside my Sheffield and Jamaica at the same engagement, but more of that in a bit... I'm relauctant to give Trumpeter too much credit for this one, by the time I'd fixed all the issues and errors, I think I'd have been better off scratch building this one. As usual for me, I made great use of aftermarket - Northstar, L'Arsenal, White Ensign and 3D printed, along with a fair amount of scratch work. Paint is all Colourcoats. And with the rest of the fleet: Front to back - Jamaica/Belfast/Sheffield Left to Right - Jamaica/Belfast/Sheffield Andrew
It's been a while, but I've finally finished a ship! This is a scratch build of HMS Jamaica that I kicked off about 2 1/2 years ago, but then stalled while I collected a few accessories and brass sets. My aim was to model her configuration in December 1943 during the Battle of NorthCape. Here's the rest of the photos: Closeups And a couple of shots alongside my HMS Sheffield, also at both North Cape nad Berents Sea battles: I'll try to be a bit quicker off the mark with HMSs Belfast, DoY and Norfolk... Andrew
British Cruiser Tank A13 Mk.1 and Mk.II Armor PhotoHistory The development of the A13 can be traced back to 1930, with the development of the Christie tank and revolutionary suspension in the USA. British officers, however, only really became interested in the concept after seeing a Red Army large-scale exercise and manoeuvres, featuring platoons of BTs. Their sheer speed and the operational opportunities available to them were more than obvious. Later, Morris sent a team in USA to purchase one of Walter Christie's tanks, with a licence. This experimental type, named A13E1 (fall 1936), was too cramped for operations and had to be rebuilt, leading to a second prototype A13E2. The latter had the new Cruiser Mk.I (A9) turret, a revised drive train, with only the rear drive sprocket, better tracks and revised armour design. In trials, speeds in excess of 40 mph (65 km/h) were possible, but in practice, 30 mph (48 km/h) was more commonly used in cruise speed. The third prototype, A13E3, set the pre-production standards for the new A13 series. The Cruiser Mk.I was the first to be built, although in small quantities (only 65), followed by an all-improved version, the A13 Mk.II. The A13 Mk.I was built at Nuffield Mechanization & Aero Limited (a subsidiary of Morris Motors) in 1939. With the threat of war growing, some shortcomings were detected and, by the 30th delivered, the War Office decided to build a new, up-armoured model. The main frontal armour was to be raised to 1 in (30 mm) and the turret was to receive appliqué armour panels covering the sides and rear in a sloped formula, which was also adopted by the next generation of cruisers, the Covenanter and Crusader. This angled turret is the easiest way to distinguish between the A13 Mk.II and the Mk.I. The last Cruiser Mk.III was upgraded to this new standard before delivery. With war approaching, production orders were raised to 225 units, to be delivered before the end of 1940. Nuffield facilities were not sufficient, so English Electric, Leyland and LMS Railway were later called to join the wartime production. The first change affected the Vickers water-cooled 0.303 in (7.7 in) machine-gun, which gave constant troubles. The more reliable and compact Besa, with an anti-vibration mount was chosen instead. This model was derived from a Czech design. All vehicles produced by 1940 were rearmed with this new coaxial machine-gun, later known as the Mk.IVA, the main and only variant of the A13 Mk.II. In all, 665 were built of this variant, until late 1940. This softcover book contains eighty eight pages of information, photographs, diagrams and colour profiles. Not only does this book cover the history of the design and development that went into these tanks, but it is filled with some fabulous period photographs of the vehicles. These photos cover the every theatre that these tanks were used in, including Europe, North Africa, Malta and also on exercises and training within the UK. The descriptive text that accompanies each set of photographs includes, where possible, the vehicles serial number, unit, information on the gun mounting and even the vehicles name. Some of the more interesting photographs are those of the tanks being transported, whether under their own steam, by rail or the more rarely seen American built White 920 tank transporter. The line side views, all in 1:35 scale show each variant from the prototype to the last production version and are very useful in distinguishing the differences not only of the profile, but also the equipment and gun mountings used throughout production. Then there is a section of line diagrams of some of the equipment used in the tanks, ranging from the engine, gearbox and clutch brake assemblies through to the instrument panels and equipment positions in the fighting compartment. Finally, there are seven pages of three and four view colour plates which show clearly the colour schemes used, the various regiments and unit markings and their positioning. Conclusion This is a superb book which is not only very interesting for a historians point of view, but for those modellers who, like me, are interested in these vehicles. It would make a great resource and companion piece to the modeller when building one of the Bronco or Italeri kits that are available. Very highly recommended. Review sample courtesy of
Royal Navy cruisers have long been an interest of mine, great looking ships with busy careers, but almost completely ignored in kit form. So in a challenge to the manufacturers to release a kit just before I finish the scratch build... ...I've started work on the Fiji-Class Cruiser HMS Jamaica. The real ship spent much of her war escorting Arctic Convoys and was at both Battles of the Barents Sea and North Cape so fits nicely with the HMS Sheffield I built a couple of years ago. Here's a couple of quick shots of the current status: Still a long way to go, but the basic shapes are coming together quite nicely! Andrew