Search the Community
Showing results for tags 'battle damage'.
Found 4 results
Hi all! First just to say a quick hi to everybody! This is actually my first post and my first model in a really long long time, actually it's my first armour kit. The model in question is an old issue of a Panzer Ausf. V G 1/48 from Academy, which is a motorized version. Although I am not planning in focussing much on the motor bit. I got this model back when I was a kid so I had to go through undoing a big gluey mess I did back then. As I am using this model to learn all the techniques back again I would much appreciate comments on how to improve things! As you see I cleaned the side objects there were glued to the sides of the hull and have started adding Miliput plaster for the Zimmerit cover. I have made a custom mould for the zimmerit pattern out of plasticard with a scribbler. I have also added some brass mesh to the air intakes at the back to the tank. Here is a detail of the zimmerit pattern: And here from the back of the tank: As you see there is still plenty of fitting issues at the back of the hull and also on the front. Here is a detail of the front: Also as you can see I have started adding some plasticard to the sides as I plan to add some scratch-built armour plates to the side. This is it for now. I plan on keep on adding the zimmerit and give it a light sanding. Also finish adding the armour side plates and modify the upper bit of the turret where the gun joints to give it the proper shape of the Ausf. G. I was also thinking in adding the curled protection plates to the exhaust at the back of the tank. Thanks in advance for your comments! All the best, Alex
Hi guys, this was a bit of an experiment ive been wanting to do for some time. Below is a screen grab from the Battlestar Galactica Mini Series, it shows a Battlestar similar to the Galactica hit and adrift, and it gave me an idea. I thought to myself, hmmmmm ...so, rather than posting all the photos, here is the end product, and a link to the folder with all the WIP photos for your viewing pleasure. http://s181.photobucket.com/user/chris1984_99_99/library/Battlestar%20Titanic?sort=3&page=4 I still need to get a base made for it, but I think im finished with the kit itself. Its my first time doing an explosion this way, so any words of advice or how to improve would greatly be appreciated! Thanks! Enjoy!
This is the fine 1/72 Mig 21 “Battle Damage” reboxed by Lindberg. The original kit was produced by IMC in the 1960s. Its trick feature was that you could build the kit with molded “battle damage”. I needed a quick fix for building something so did this in a weekend. The build process is here http://www.britmodeller.com/forums/index.php?/topic/234973002-mig-21-battle-damage;-a-weekend-build/. I only did this kit to play with the battle damage feature. There was not any considerations to how accurate a kit this is, what needed to be done to correct it; the sole purpose was to play with painting the battle damage and having fun. Here are the results If you want to revisit the days when you just brought a kit home to get it built and play with it in the same afternoon, this is the kit for you. It was a blast. As always, all comments are welcome.
I was looking for a quick, satisfying build fix in between trying to clear out my shelf of doom kits and I found this little beauty. This will be another actual weekend build. It is the 1/72 Mig 21 reissue from Lindberg. The original mold is from the 1960s molds by a company called IMC. I thought about doing this for the Lesser Known Air Force Group Build as an Iraq version, but that country was already taken. So what sets this kit apart from regular models is the thrill of reproducing “battle damage” in the form of alternative plastic parts. The parts count is low and the shape is suspect. Looks like my kind of escape build therapy. Here is the interior Yep that’s right, the entire interior is wrapped up in this poor hapless, semi-shapeless representation of a seat with a pilot in it. That’s all you get, nothing more. I will try painting this, but even that will be a chore as the detail on this is awful. On with the build. Here is the first build step, putting the fuselage and nose piece together. Next are the wings and tail planes And that is all you have to do to get this ready for painting. These construction steps took me all of 15 minutes, most of that cleanup of the parts and surfaces to be joined. I plan on doing the Iraq version. Off to the painting box and the underside is painted a light blue. Next up, the upper two colors in tan and brown. The brown is sprayed first And then after the brown is masked off the tan is applied. And the real reason for this kit, the battle damage areas are tackled. The damage areas are first given a base coat of metallic silver Then the silver receives its first wash to bring out the detail It was at this point I decided to get creative; not necessarily a good thing. Since I noticed there is battle damage to the wing top and bottom, I decided, what I thought was most logically, that the wing damage would have gone through the wing and I needed to create openings in the wing to more accurately show the damage. It started off great. Then I looked on the underside. Yeah, not so great. It seems the damage on the top wing does not line up with the damage on the bottom wing and not in a logical fashion. In other words, even if you assume the damage went through the wing at an angle, the angle is just way too off from top to bottom to drill. On two of the top holes I only drilled down through the top wing, but stopped before I hit the bottom wing. I think I will do that on the bottom also. Hopefully it will look like holes in the wing. Next up the entire kit surface received some weathering to bring out panel lines and details. The bottom was first The top received its wash And then it was removed to show this Now the side details will be picked out as to different shades of metal and to show where the engine and frame is exposed. To the exposed engine panel, I added a blue wash to reflect the heat fatigue. Next, washes and pastels then are used to create a smoky, fire aftermath feel. All that is left are the hangy down parts to finish. The front spike, wheels, covers and missile rails are installed. The attachment points for the landing gear are laughable. My first go around resulted in the starboard gear collapsing. I then redid the legs, added some bracing wire, redid the attachment holes and applied an abundance of superglue and now the landing gear will support the kit. Next up was the interior. This is the best I can do with painting the blob that is the figure. And the massively complex and highly detailed interior is placed in the kit. Whew!! That was tough. The canopy is then attached closed, of course, and now this kit is finished An RFI in better light will be done today as the weather has improved. As always, all comments are welcome.