I bought this when it first came out so thought I should get around to building it. Although it looks great int he box, there are some issues to watch out for. The mold slip means every part needs to be cleaned up, especially mating surfaces. The nose cone is too wide for the fuselage. I fixed this by sanding down the mating surfaces of the nose cone parts, the fit you see in the kit has not been touched at all with sand paper. Thinning down the mating surfaces of the wing just behind the trailing edge gives a much better fit. Test fitting the air intake covers will reduce the amount of filling and sanding you will need to do.
It's also worth cutting off the locating pins on the drop tanks for a better fit and making all attachment holes of the bombs and drop tanks larger, otherwise they won't fit the locating pins. Decals are very nice, I did apply over 100 stencils, but they gave no trouble at all. Everything is OOB, but I decided to try and use the RBF tags I bought. They are nice, but fiddly; there is a very small photo etch pin in the top of each, you can barely see it....I can barely see it but I know they are there!