OzH Posted May 2, 2011 Share Posted May 2, 2011 (edited) Not really be able to do any modelling for a few months now, new job, new kitchen and just life in general getting in the way... I bought this a good few years ago, opened it up and did a little work on the cockpit then pushed it to one side... Well she's out again, hopefully a bit more successful this time! First thing, this is bloody huge! wing span is about two foot, the fuselage has to be about 18 inches long... I have the Aeromaster "Flying Cats Pt 1 "Foreign"" decal set and am planning to do FP225 of 240 Sqn (Special Duties Flight) aircraft. To "help" I have the Eduard PBY-5A etch set and canopy mask, True detail Cockpit detail set, Master .50 and .30 brass barrels (these are amazing, so small and just so cool!) and while I was at the last Yeovilton show, I came across the Belcher Bits tail update that I paid a couple of pound for from a rummage box! So, I've painted the cockpit and interior, and added bits from both Eduard and True Detail sets... Got it installed Sealed up and the tail fitted... Can't see much... Edited August 27, 2012 by OzH Link to comment Share on other sites More sharing options...
Dads203 Posted May 2, 2011 Share Posted May 2, 2011 Nice work so far OzH, good to see you back on the build mate. BR Dan Link to comment Share on other sites More sharing options...
jimbuna Posted May 2, 2011 Share Posted May 2, 2011 Looking very nice...following with interest. Link to comment Share on other sites More sharing options...
Shar2 Posted May 2, 2011 Share Posted May 2, 2011 Very nice work Makes me wish I hadn't sold my one now. Link to comment Share on other sites More sharing options...
Metallicus Posted May 2, 2011 Share Posted May 2, 2011 OH MY that is some fantastic work in the crew areas!! Pity it wont be seen Link to comment Share on other sites More sharing options...
Silver Fox Posted May 2, 2011 Share Posted May 2, 2011 Lovely work, the seats look really well worn as does the gunners floor area. Watching with interest. Link to comment Share on other sites More sharing options...
Murdo Posted May 2, 2011 Share Posted May 2, 2011 Very nice!!! Link to comment Share on other sites More sharing options...
OzH Posted June 19, 2011 Author Share Posted June 19, 2011 Here's an update on the Cat... Glazing on and ready for some paint Tail's getting there Huge wings Now with floats And engines Eduard etch is good... Some small parts ready to go... Link to comment Share on other sites More sharing options...
worm Posted June 19, 2011 Share Posted June 19, 2011 Nice build, I've got two of these things in the stash and after seeing your work I'm wonder why, why did I get two........... Looking forward to building them. Keep you the good work and all the best Steve Link to comment Share on other sites More sharing options...
Moofles Posted June 19, 2011 Share Posted June 19, 2011 my word that is looking very very good. Link to comment Share on other sites More sharing options...
jimbuna Posted June 19, 2011 Share Posted June 19, 2011 Coming along nicely. Link to comment Share on other sites More sharing options...
macgregor Posted June 20, 2011 Share Posted June 20, 2011 Come along nicely, very interesting choice of kit, good to watch. Mac Link to comment Share on other sites More sharing options...
gfurm Posted June 20, 2011 Share Posted June 20, 2011 That paintjob in the cockpit is goooood. Wish I could do that. Greg Link to comment Share on other sites More sharing options...
Enzo the Magnificent Posted June 20, 2011 Share Posted June 20, 2011 The cockpit and the rest of the interior is simply inspirational. Link to comment Share on other sites More sharing options...
Uncle Uncool Posted June 20, 2011 Share Posted June 20, 2011 Noooiiiceee, OzH...!!! How thick is the kit's tail compared to the Belcher Bits correction one? Mind takin' a picture of both tails just as they are in order to see it, please, mate? Thanks, bloke. Cheers now, Unc² Link to comment Share on other sites More sharing options...
Moeggo Posted June 21, 2011 Share Posted June 21, 2011 Looking good! I built one of these a few years ago. I have to get another one sometime! Link to comment Share on other sites More sharing options...
timbo33 Posted June 22, 2011 Share Posted June 22, 2011 (edited) Really Nice - I have one of these to do too so watching your build closely!! How are you going to display it btw? I've got the 5A with wheels - do you get the landing trolleys in this kit or are you going to mount it 'in the drink'? Edited June 22, 2011 by timbo33 Link to comment Share on other sites More sharing options...
stringbag Posted June 22, 2011 Share Posted June 22, 2011 Hi Oz. Check your e-mails Buddy. Chris. Link to comment Share on other sites More sharing options...
OzH Posted July 27, 2011 Author Share Posted July 27, 2011 Well the Cat is ready for paint - but - as she's such a large aircraft, she's in a queue, waiting for a few smaller bits to be finished off... Noooiiiceee, OzH...!!! How thick is the kit's tail compared to the Belcher Bits correction one? Mind takin' a picture of both tails just as they are in order to see it, please, mate? Thanks, bloke. Cheers now, Unc² Taken me a while, but as requested, some comparisons shots of the Belcher tail and the kit.... Really Nice - I have one of these to do too so watching your build closely!! How are you going to display it btw? I've got the 5A with wheels - do you get the landing trolleys in this kit or are you going to mount it 'in the drink'? Yep, you get the beaching gear, very basic, but it saves me creating a water feature..!! Link to comment Share on other sites More sharing options...
Uncle Uncool Posted July 29, 2011 Share Posted July 29, 2011 Taken me a while, but as requested, some comparisons shots of the Belcher tail and the kit.... Many thanks, OzH, mate! Highly appreciate the gesture. Honestly; I wouldn't have ever thought the kit tail were so awful now that I peep at the Belcher resin correction... Looks like it's gonna be necessary to order one for mine as well. On a 1 to 10 scale - bein' 1 too easy 'n' 10 too hard - whut d'ya think it'd be like to try 'n' correct this flaw of the kit tail doin' without the Belcher bit? Would it ever be possible? , OzH Unc² Link to comment Share on other sites More sharing options...
shepard Posted July 29, 2011 Share Posted July 29, 2011 (edited) Hello OzH... greetings from Brazil my friend... if you please, tell me what did you used, and steps taked to achieve the interior faded green on the first pictures that you show... the white faded over de green base look great... tks in advance Shep Edited July 29, 2011 by shepard Link to comment Share on other sites More sharing options...
OzH Posted August 27, 2012 Author Share Posted August 27, 2012 Finished More pictures in Ready for Inspection... 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now