Jump to content

Pics of Alarm carrying Tornado EF-3s?


PaulR

Recommended Posts

Evening all,

am thinking about building an EF-3 complete with Alarm missiles. I have pictures of 11 sqn airframe coded DG complete with Alarms, but was wondering if anyone had/knows where there might be pictures of other EF-3s actually carrying Alarm missiles. The reason I ask is that my stumbling block for this project is decals; I have the right eagle markings, and the squadron bars, but the DG code (black with yellow surround) I don't have. The decal sheet I am going to use is an old Xtradecal sheet, and this has the right style codes for DA, DH and DX; it would be very handy if these tied up to an airframe that actually carried the Alarm missiles.

Faint hope but worth a try I thought!

Cheers for any help.

Paul

Link to comment
Share on other sites

Evening all,

am thinking about building an EF-3 complete with Alarm missiles. I have pictures of 11 sqn airframe coded DG complete with Alarms, but was wondering if anyone had/knows where there might be pictures of other EF-3s actually carrying Alarm missiles. The reason I ask is that my stumbling block for this project is decals; I have the right eagle markings, and the squadron bars, but the DG code (black with yellow surround) I don't have. The decal sheet I am going to use is an old Xtradecal sheet, and this has the right style codes for DA, DH and DX; it would be very handy if these tied up to an airframe that actually carried the Alarm missiles.

Faint hope but worth a try I thought!

Cheers for any help.

Paul

here are 2

link1

link2

Gav

Link to comment
Share on other sites

  • 3 months later...
Were ALARM-carrying F.3s a limited number of special airframes or can I hang ALARMs under any F.3? And if yes, were ALARMs confined for use with certain squadrons?

TIA

Ingo

I believe it was just 11 Sqn that trialled the EF.3 configuration, and it was never used operationally. I could be wrong though...

Link to comment
Share on other sites

Spooky I have this very project planned my self!

I have the 1/48 airfix EF3 kit (I know it's awful!!)

The serial number for the aiframe is VE907. I've done a search on that but as it also wore the red and White zebra markings that's pretty much all the pictures you get!

The airfix instructions mention the eagle on the front fuselage is copyright of the BBC from a documentary, maybe worth searching out for reference!

Phil

Link to comment
Share on other sites

I believe it was just 11 Sqn that trialled the EF.3 configuration, and it was never used operationally. I could be wrong though...

It was only 11 Sqn & only a handful of jets were converted,they were going to be used on Op Telic 1 iirc but never did.

Link to comment
Share on other sites

Thanks for your answers - I think I will leave the ALARMs off the F.3 Tornado.

That leaves me with limited options for my two Flightpath Alarm missiles - would any of these have carried them: Jaguar GR.1 or 3, Harrier GR.7/9?

Ingo

Hi Ingo

I'm afraid only Tornados have carried the missile in service, it may have been trialled on the Jag or Harrier.

Muzz

Link to comment
Share on other sites

Serial number of the trials EF3 is or was ZE763 DG , 11 Sqn.

Add those Alarms to an Airfix F3 .....you know you want to .....heres one I made earlier ...

016-5.jpg

017-3.jpg

Andy

Very nice job (apart from the bays & undercart being white when they should be gray..And the BOZ pod is totally the wrong shape at the front..The rear they got rightish unlike Italerai)

Link to comment
Share on other sites

Very nice job (apart from the bays & undercart being white when they should be gray..And the BOZ pod is totally the wrong shape at the front..The rear they got rightish unlike Italerai)

Fair comment Spike....... that was made before I read your posts about grey V white matey :innocent:

Whats wrong with the Boz pod .....is it a bit too fat .....if yes I thought it didnt look right ...needs to go on a sanding stick diet !!

Thanks for the kind feedback .....Just shows what can be done with the Airfix F3 kits.

Andy

Link to comment
Share on other sites

Fair comment Spike....... that was made before I read your posts about grey V white matey :innocent:

Whats wrong with the Boz pod .....is it a bit too fat .....if yes I thought it didnt look right ...needs to go on a sanding stick diet !!

Thanks for the kind feedback .....Just shows what can be done with the Airfix F3 kits.

Andy

No dramas mate,the BOZ should be a gentle taper to a point from just in front of the mounting saddle where Airfix have a almost missile shape.

BOZ107B1.jpg

ZA452BozPod.jpg

Edited by spike7451
Link to comment
Share on other sites

Cheers for that Spike :thumbsup: ......Aaah......I see what you mean ....a picture tells a thousand words !!

Ill be removing a bit of plastic from the next Boz 107 I use and I promise to paint the legs and wells a very light grey.... :lol:

Cant have too many Tonkas ...need to add to the 6 Ive done :whistle:

Andy

Link to comment
Share on other sites

Cheers for that Spike :thumbsup: ......Aaah......I see what you mean ....a picture tells a thousand words !!

Ill be removing a bit of plastic from the next Boz 107 I use and I promise to paint the legs and wells a very light grey.... :lol:

Cant have too many Tonkas ...need to add to the 6 Ive done :whistle:

Andy

I know..I have 12 in different scales...I mainly build RAF stuff...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...