Spit Fan Posted September 26, 2009 Share Posted September 26, 2009 HI, Another Spifire MK.I question. Approximately when did armor back plate and headrest begin to be seen on squadron a/c? The other question is what color was this armor plate painted? I seem to recall it was a dark color, black? As always any information will be greatly appreciated. John R. Link to comment Share on other sites More sharing options...
Troffa Posted September 26, 2009 Share Posted September 26, 2009 (edited) Hi Spit Fan, Armour on the Spit discussed here recently: http://www.britmodeller.com/forums/index.php?showtopic=35099 Not sure if the colour gets a mention. Edited September 26, 2009 by Troffa Link to comment Share on other sites More sharing options...
Edgar Posted September 26, 2009 Share Posted September 26, 2009 That discussion concerned the windscreen; the (fixed) armour behind the pilot's head, and the (removable) behind the seat, were factory-fitted, under mods 140 & 146, from 6th. February, 1940. At first, the seat armour was the same width as the seat, and the handhold, later seen in the backrest, was cut into the plate; later, the plate was wider, and, from September 3rd. 1942, more armour was fitted under the seat, and behind the pilot's calves. As for colour, there was a story that the first (unofficial?) plates were unpainted steel, and there's a servicing film available, for a 609 Squadron Mk.I, with black/white undersides, which includes a quick shot of the armour, and it's black. Edgar Link to comment Share on other sites More sharing options...
Troffa Posted September 26, 2009 Share Posted September 26, 2009 (edited) "That discussion concerned the windscreen; "Edgar And in post 12 of that discussion you stated: "Mod 140 was "To provide rear armour protection (fixed.)" i.e on the seat bulkhead, and was implemented 6-2-40. Mod 146 "To provide rear armour protection (removable)" i.e. behind the seat, was implemented on the same day. Ministry approval, for those two mods, wasn't applied for until 10-11-39. And, before anyone quotes "Spitfire the History" (or some other source,) the information comes from Vickers' own ledger of all of the Spitfire mods, held in the RAF Museum, under their reference B3606. Edgar " Which is why I linked to it. Edited September 26, 2009 by Troffa Link to comment Share on other sites More sharing options...
Edgar Posted September 27, 2009 Share Posted September 27, 2009 Sorry, sunshine, I just skipped through the article, and missed that bit; put it down to age (mine.) Edgar Link to comment Share on other sites More sharing options...
Spit Fan Posted September 29, 2009 Author Share Posted September 29, 2009 That discussion concerned the windscreen; the (fixed) armour behind the pilot's head, and the (removable) behind the seat, were factory-fitted, under mods 140 & 146, from 6th. February, 1940. At first, the seat armour was the same width as the seat, and the handhold, later seen in the backrest, was cut into the plate; later, the plate was wider, and, from September 3rd. 1942, more armour was fitted under the seat, and behind the pilot's calves. As for colour, there was a story that the first (unofficial?) plates were unpainted steel, and there's a servicing film available, for a 609 Squadron Mk.I, with black/white undersides, which includes a quick shot of the armour, and it's black.Edgar Thanks Edgar! It's good to know that I wasn't totally imagining the dark color on the armor plate in some early Spitfires. It would seem from all that I read here that by August 1940 the armor was most likely painted in the same interior grey-green as the rest of the cockpit. I am in the process of coverting a Tamiya MK.Vb back to a MK.I (cannon), R6776 QV*H, as flown by Flt. Sgt. George Unwin during August 1940 and the armor plate will be interior grey-green. Happy Modeling, John R. Link to comment Share on other sites More sharing options...
Amouse22 Posted April 1, 2020 Share Posted April 1, 2020 On 9/26/2009 at 12:07 PM, Edgar said: That discussion concerned the windscreen; the (fixed) armour behind the pilot's head, and the (removable) behind the seat, were factory-fitted, under mods 140 & 146, from 6th. February, 1940. At first, the seat armour was the same width as the seat,... Edgar Hi! So Tamiya made a mistake in the 1/48 model ? There is no pilot's armor for P9495 DW-K No.610 Squadron (produced 16-4-40). http://www.airhistory.org.uk/spitfire/p009.html Link to comment Share on other sites More sharing options...
michael_hase Posted April 1, 2020 Share Posted April 1, 2020 Simple answer, yes.... 2 Link to comment Share on other sites More sharing options...
Rolls-Royce Posted April 1, 2020 Share Posted April 1, 2020 (edited) Spitfire IÂ P9374, "J", delivered to the RAF on 2 March and shot down on 24 May 1940, is known to have had the behind-the-seat armor (but not the head armor). This was found still in place in the cockpit on its recovery in 1980. The original plate now flies in the rebuilt aircraft. Edited April 1, 2020 by Rolls-Royce Link to comment Share on other sites More sharing options...
Crimea River Posted April 1, 2020 Share Posted April 1, 2020 What about earlier production Spits like N3200? Were the mods carried to the field? Link to comment Share on other sites More sharing options...
Rolls-Royce Posted April 1, 2020 Share Posted April 1, 2020 (edited) A picture of N3200 in its current state, with the armor plate visible behind the pilot's left arm. It isn't the seat itself, as that can be glimpsed under his left elbow. Whether this means the aircraft had it when it was shot down, I don't know, but I suspect it was there. Edited April 1, 2020 by Rolls-Royce 2 1 Link to comment Share on other sites More sharing options...
72modeler Posted April 1, 2020 Share Posted April 1, 2020 "Blast! The flipping crowbar has come adrift!" (Sorry- couldn't help myself, as we don't have an aircraft memes forum...yet!) Mike Link to comment Share on other sites More sharing options...
Crimea River Posted April 2, 2020 Share Posted April 2, 2020 (edited) Thanks R-R. Yes, I've seen that pics and it so happens that I'm building the Tamiya Mk I as this very machine. The instructions say to leave out the armour and that's consistent with a number of statements by Edgar brooks posted here. One is here:   where he says "The head armour was added in February 1940, but, due to the Hurricanes in France getting priority, the Spitfires didn't get it behind the seat until after Dunkirk, with those airfields nearest the Channel first." Given N3200 went down 26 May 1940 during the Dunkirk actions, this statement, if true, would suggest no back armour. Interestingly, the restored airplane has no head armour. The pics of the beached airplane sadly don't show the seat. Edited April 2, 2020 by Crimea River Link to comment Share on other sites More sharing options...
alt-92 Posted April 2, 2020 Share Posted April 2, 2020 off-topic: there must be some way to get the IWM logo as a decal/transfer?  Link to comment Share on other sites More sharing options...
Rolls-Royce Posted April 2, 2020 Share Posted April 2, 2020 11 hours ago, Crimea River said: Thanks R-R. Yes, I've seen that pics and it so happens that I'm building the Tamiya Mk I as this very machine. The instructions say to leave out the armour and that's consistent with a number of statements by Edgar brooks posted here. One is here:   where he says "The head armour was added in February 1940, but, due to the Hurricanes in France getting priority, the Spitfires didn't get it behind the seat until after Dunkirk, with those airfields nearest the Channel first." Given N3200 went down 26 May 1940 during the Dunkirk actions, this statement, if true, would suggest no back armour. Interestingly, the restored airplane has no head armour. The pics of the beached airplane sadly don't show the seat. Pictures of the recovered aircraft that I've seen showed that there wasn't much remaining of the cockpit area, so if it was there originally, it has been lost to history. If it didn't have it while P9374 did, there may be another reason. P9374 was among 6 squadron aircraft selected to escort PM Winston Churchill on a flight to Paris to meet with the French government. For whatever reason, it did not make the flight and returned to its home base. The aircraft that made that trip had had their squadron code removed for security purposes, and this is felt to be the reason P9374 was photographed on the French beach wearing only its individual aircraft letter "J" after being brought down. It also might explain that aircraft having the seat armor earlier than is thought to be the case. Link to comment Share on other sites More sharing options...
Crimea River Posted April 2, 2020 Share Posted April 2, 2020 I agree with you that pics of the beached N3200 are inconclusive with respect to the seat armour. However, contrary to the restored version's absence of head armour and Tamiya's instructions saying the same, it appears to me that the head armour was actually there. This colourized pic shows it though the head cushion has gone missing:  2 Link to comment Share on other sites More sharing options...
Rolls-Royce Posted April 2, 2020 Share Posted April 2, 2020 Too bad we can't ask the German bent over into the cockpit to just scoot over to his right a little...😉 Link to comment Share on other sites More sharing options...
Crimea River Posted April 2, 2020 Share Posted April 2, 2020 I think he's busy ripping the seat out. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now