Rémi Posted January 28 Posted January 28 Hi all With the end of my F-4B, it's time to start a new kit This time, I choosed a recent kit with the Fairey Battle from Azur I choosed the Fairey Battle MkI "Poles in UK" I didn't choosed the schemes yet Either I made the artbox plane or etheir I made a plane during the Battle of France even if the box didn't covert a such plane 12 1
marvinneko Posted January 28 Posted January 28 I wanted one of these ages ago but kind of gave up. Watching with interest!
VG 33 Posted January 30 Posted January 30 Hello This is a good idea as I will soon start one as well. Patrick
wrap25 Posted January 30 Posted January 30 Currently working on one of these to represent K7583, used to transition 3 Squadron pilots from Gladiators to Hurricanes. Tertius Primus Erit WIP: 1/72nd; Fairey Battle I, Gloster Gladiator I, Hawker Hurricane I, Deperdussin TT.
ToE1984 Posted January 30 Posted January 30 Following with interest. I got my kit a few weeks ago and will go for GRoF of 301 sqn one day.
Rémi Posted February 3 Author Posted February 3 Hi all I almost finished the paint of the cockpit But I have a question In the instructions the wheels bays should be painted in aluminium But one some surviving planes I see it's look like an interior green Anybody know the exact colors of the wheels bays ? 2
marvinneko Posted February 4 Posted February 4 On 03/02/2025 at 01:09, Rémi said: Hi all I almost finished the paint of the cockpit But I have a question In the instructions the wheels bays should be painted in aluminium But one some surviving planes I see it's look like an interior green Anybody know the exact colors of the wheels bays ? @Heather Kay would probably know
Heather Kay Posted February 4 Posted February 4 5 minutes ago, marvinneko said: @Heather Kay would probably know I just followed the instructions. My reference books seem to show aluminium in the wheel wells and bomb cells, but that’s not conclusive as they may be photos of early production or even prototype airframes. I’d be wary of comparing with surviving Battles because I think almost all of them have been reconstructed from different wrecked aircraft. 3
Rémi Posted February 5 Author Posted February 5 Thanks for your answer I agree with none of the survivor can tell we witch colors where the wheels bays I finded a photo of a Blenheim destroyed during campaign of France who show the wheels bays in gray green I wish to beleave that for the Battle it is the same finish 2
Rémi Posted February 8 Author Posted February 8 (edited) I finished the interior I started it with the grey green interior I used the Gunze H312 For the cockpit the details level is sufficiant for the scale I painted the panel instrument in black and use only one part of the decals instruments I think it should be more thin for the white. This is why I use only one part of it Some details come on the wings Now I can paint the interior fuselage with the little details I finished the paint with the last element such as the rear gun station and the radiator It is the time to add all elements together For the front parts, no probleme For the rear parts you must adjust and cut some parts suchs as the top of rear bulkhead and the radio to long for the fuselage But after that you can close the fuselage Edited February 8 by Rémi 16 1
Rémi Posted February 12 Author Posted February 12 Thanks all for your answer Next steps : The add of the wings Fuselage and wings joins very well You must use filler only in little part The radiator cover have only a little gap who need filler The only subject of attention is the rear parts of the canopy I choosed to present this part open. You have two solution to add it. - by the behind of the central part but if you wish this solution you must glue parts at the end - by the upfront but it is difficult to add it on the central part I didn't choosed yet witch solution I will use 21 1
Philly1860 Posted February 13 Posted February 13 Very nice progress cant wait to see the next installment.
Bruno P Posted February 19 Posted February 19 Hi Rémi! Great job!! The Azur/Frrom seams to be a very good kit with thiny detail exterior surfaces and a good detail on internal parts. What do you think about it? Bye
Rémi Posted February 19 Author Posted February 19 Hi Bruno I can't tell you if the kit is correct in his forms. I'm not a specialist of the plane May be the interior should be more detailled or better engenired. But it is not a "tamygawa" kit and details are very well for the scale. I can tell you only that it is a pleasant kit to build with no major defaults. All parts fit well together and you must work only on some point. far away that previous kits like the Breguet Alize. I built the SMB2 from the same brand and like the Battle it show great progress of Azur/Frrom I can only recommended this kit even for a beginners (with some little attention) 2
Rémi Posted March 29 Author Posted March 29 After several weeks without progress, I decided to paint my battle I painted the intrado a first time but my spraygun decided to spit on the last layer I started again to paint the black on the extrado I used the Gunze H72 and H73 When I finished the paint I see that the spotlight windows pay more attention with a joint needing a little filler. It's too late unless I restart all the paint 11 2
Rémi Posted March 30 Author Posted March 30 I have a question on witch roundel is underwear on the upper side I wish to made the L5226 serial code QT - Q from the 142 squadron I have a good photo from this plane at this address https://www.asisbiz.com/il2/Fairey-Battle/RAF-142Sqn-QT/pages/Fairey-Battle-I-RAF-142Sqn-QTT-L5226-shot-down-Battle-of-France-1940-ebay-02.html But I have no clear pic for the roundel on wing extrado Some pic show a blue/white/red round like this pics on another plane https://www.asisbiz.com/il2/Fairey-Battle/RAF-142Sqn-QT/pages/Fairey-Battle-I-RAF-142Sqn-QTB-shot-down-Battle-of-France-1940-ebay-01.html Anybody now the history of national marks on the upper side of the wings ?
Rémi Posted March 30 Author Posted March 30 The work of the whole day : the insigni marks I'm satisfied of the result especially for the side roundels with his 4 colors 11 2
Rémi Posted March 31 Author Posted March 31 (edited) The QT-Q is alive ! I used the Gunze H335 for the letters code Edited March 31 by Rémi 10 1 1
PripyatGopnik Posted April 2 Posted April 2 These work in progress pictures are top notch quality! Impressive photography. WOW🤩 The variations on the colors is really striking too, absolutely the opposite of monotone. You definitely have a signature style with the shading, the way an artist would have. 1
Rémi Posted April 6 Author Posted April 6 A little update I think the last before the end this week A the program : Paint of the serial. I wanted to use the decals but finally I painted the serial I added the leg suspension. It is not very easy. I painted and added the wheels Finished the exhaust and unmasked the canopy 9
Brandy Posted April 7 Posted April 7 That's looking very nice with the paint on. The kit looks pretty good, but it's a shame they moulded the bomb doors sitting below the wing underside. Ian
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now