Jump to content

Recommended Posts

Posted (edited)

KEP models is to release a 1/32nd Mikoyan Gurevich MiG-27K "Flogger-J2" 3D printed conversion set - ref. KMU32054 - for the Trumpeter MiG-23MF kit - ref. 03209 

Source: https://m.vk.com/wall-206801441_6217

 

Quote

Есть давняя мечта - собрать миг-27 в 32-м масштабе. Но как известно, его нет в 32-м. Внезапно друг подкинул - так давай переделаем..... из 23-го! И вот понеслась. Имеем на руках клиента для опытов миг-23МФ от Трубки. Понятное дело, что проще миг-27 сделать из миг-23БН. Но бн тоже нет. Тогда есть цепочка - миг-23МФ - БН - миг-27. Вот мы этим не простым делом и займёмся. Чтобы не усложнить себе задачу, будем сразу из МФ - делать конверсию миг-27К, со всеми вытекающими. Поэтому надо всё внимательно изучить, чем сейчас и занимаемся параллельно текущим проектам. На выходе нужно получить крайне не маленькую конверсию для набора миг-23МФ в миг-27К. Набор само собой будет содержать и новый комплект декалей, будет и много интересного вооружения. Информация кое-какая есть, но если у кого есть что интересное по этому процессу - рады принять. В личку. KMU32054

Googled:

There is an old dream - to assemble a MiG-27 in 32nd scale. But as we know, it is not available in 32nd. Suddenly a friend suggested - so let's remake it..... from 23rd! And here we go. We have a client for experiments MiG-23MF from Trubka. It is clear that it is easier to make a MiG-27 from a MiG-23BN. But there is no BN either. Then there is a chain - MiG-23MF - BN - MiG-27. So we will do this difficult task. In order not to complicate our task, we will immediately make a MiG-27K conversion from MF, with all the consequences. Therefore, we need to study everything carefully, which is what we are currently doing in parallel with current projects. The output should be an extremely large conversion for the MiG-23MF to MiG-27K kit. The kit will naturally contain a new set of decals, and there will be a lot of interesting weapons. There is some information, but if anyone has anything interesting about this process, we are happy to receive it. In a personal message. KMU32054

 

71-S2u-H1-Xzn-L-AC-SL1000.jpg 

 

RRn-Ym-TKYOd0.jpg

 

V.P.

 

Matt-Memory2.jpg

Edited by Homebee
  • Like 2
  • Thanks 1
Posted

Nice. I'm going to be 'that' guy though, wish someone would do the same for the HB 1/48 kits.

Posted (edited)
18 minutes ago, Muzz said:

Nice. I'm going to be 'that' guy though, wish someone would do the same for the HB 1/48 kits.

In project/design by Cold War Studio since 2021... Sigh

https://www.britmodeller.com/forums/index.php?/topic/235004894-148-mikoyan-gurevich-mig-27m-flogger-j-by-trumpeter-released-correct-resin-nose-for-mig-27m-k-flogger-j-j2-by-cold-war-studio/#findComment-3985324

 

V.P.

Edited by Homebee
Posted

Thanks Homebee, I've actually purchased this conversion kit from CWS, unfortunately I personally don't rate the quality of the product.🫤

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...