Camwader Posted March 7, 2023 Share Posted March 7, 2023 (edited) It’s taken over thirty-nine years, but now I’m finally calling the Pocher Monza complete. Purchased from Grand Prix Models in Radlett in the autumn of 1983, I started on it in 1984. For probably thirty or so of the intervening years it received no attention at all – it’s hard to explain why it was so often put aside in favour of other projects, just that my attraction to new things has always been greater than my commitment to finishing existing projects. There are a few things I’m not entirely happy with which I may revisit once I’ve had a break from it, but on the whole I’m happy with the result. I prefer it without the cycle wings, so that’s how it will be displayed from now on. Just about everything visible externally on the fully assembled car is original Pocher i.e. all bodywork, suspension, wheels and tyres, engine and gearbox. The only non-kit additions are the rear lights, number plates, rear view mirror and exhaust heat shield. The only after-market additions are the metal foot pedals, the instrument decals, the engine/chassis plate decals, the photo etched radiator badge (I lost the original) and the coach bolts for wire locking. There are more photos in my Flickr album: The Finished Monza Edited May 2, 2023 by Camwader 40 Link to comment Share on other sites More sharing options...
cmatthewbacon Posted March 7, 2023 Share Posted March 7, 2023 You could just jump into at and drive off, couldn't you? Until that last picture, that is. Fabulous work and well worth the elapsed time. You should nip down to Margate... that one looks a lot better than the one in the Pocher display down there. Depending how you're planning on displaying it, you might want to consider some sort of perspex pillar or cradle underneath -- all the ones on show were starting to sag and the wheels were splaying out, unlike the accurate looking inward front camber on your brilliant model! Truly a brilliant build. All the best, Matt 1 Link to comment Share on other sites More sharing options...
CrazyCrank Posted March 7, 2023 Share Posted March 7, 2023 I've no word to say how much I'm impressed by this masterpiece 😲👏😍 1 Link to comment Share on other sites More sharing options...
dnl42 Posted March 7, 2023 Share Posted March 7, 2023 That's quite excellent! Of course, you have me wondering if this one shot below is actually a separate 1/24 model in a diorama just to mess with us? 7 hours ago, Camwader said: 2 1 Link to comment Share on other sites More sharing options...
keefr22 Posted March 7, 2023 Share Posted March 7, 2023 Absolutely fantastic - that old cliché 'it looks real' absolutely does hold true in this case! Just magnificent modelling and well worth the extended build period! The photos are terrific too! Keith 1 Link to comment Share on other sites More sharing options...
Camwader Posted March 8, 2023 Author Share Posted March 8, 2023 11 hours ago, dnl42 said: That's quite excellent! Of course, you have me wondering if this one shot below is actually a separate 1/24 model in a diorama just to mess with us? dnl42 - You need to re-assess your idea of 1/24 scale - the model on that bench is as wide as the chair and filing cabinet - nice idea though, and a trick I have been guilty of before 😀 Link to comment Share on other sites More sharing options...
Camwader Posted March 8, 2023 Author Share Posted March 8, 2023 19 hours ago, cmatthewbacon said: You could just jump into at and drive off, couldn't you? Until that last picture, that is. Fabulous work and well worth the elapsed time. You should nip down to Margate... that one looks a lot better than the one in the Pocher display down there. Depending how you're planning on displaying it, you might want to consider some sort of perspex pillar or cradle underneath -- all the ones on show were starting to sag and the wheels were splaying out, unlike the accurate looking inward front camber on your brilliant model! Truly a brilliant build. All the best, Matt Matt, I visited the Hornby centre a few years ago when they had just opened the Pocher exhibition. All of the older models were looking quite tired even then. I will definitely support my Alfa in some way. I noticed during my build that the bonnet and body gaps varied depending on whether the model was on its wheels or on the work stands - if the real world Monza had had such a flexible chassis it would have handled like a blancmange. Link to comment Share on other sites More sharing options...
Camwader Posted March 8, 2023 Author Share Posted March 8, 2023 I have added these and a few more maintenance shots to the Flickr album: Alfa Romeo Monza Completed 8 Link to comment Share on other sites More sharing options...
kev67 Posted March 8, 2023 Share Posted March 8, 2023 WOW! I was a bit confused at first because I thought, why show photos of the actual car, where's the model, only when you put the spray cans with it that I realised it was the model 1 Link to comment Share on other sites More sharing options...
Tomasz Zamiara Posted March 8, 2023 Share Posted March 8, 2023 I never had the courage... It's beautiful! 1 Link to comment Share on other sites More sharing options...
Kitkent Posted March 8, 2023 Share Posted March 8, 2023 As all of the above have said,I love the patina and the Gulf blue paintwork. Chris. 1 Link to comment Share on other sites More sharing options...
Camwader Posted March 8, 2023 Author Share Posted March 8, 2023 2 hours ago, Tomasz Zamiara said: I never had the courage... It's beautiful! Tomasz, If I had known at the outset what was going to be involved in producing a model of an acceptable quality, I wouldn't have had the courage either. Back in the pre-internet '80s, the only source of information about these kits was various modeling magazines, and they all seemed to rave about Pocher models. With the information that's readily available now, I wouldn't have gone near it. The Pocher Monza is isn't too bad in terms of quality of manufacture - the plastic mouldings are OK but obviously nowhere near modern quality, and all the miniature metal parts are pretty good. What lets it down is the poor design which leads to very poor fit of major components, needing an awful lot of remedial action. 1 Link to comment Share on other sites More sharing options...
Camwader Posted March 9, 2023 Author Share Posted March 9, 2023 (edited) The snow coming down was far too wet for a proper photo session, but I couldn't resist grabbing a few snaps. Edited March 9, 2023 by Camwader 4 Link to comment Share on other sites More sharing options...
Vesa Jussila Posted March 9, 2023 Share Posted March 9, 2023 I like photos and impressive model. Absolutely it's worth of time you used for that. And nice to see this not so typical colour. 1 Link to comment Share on other sites More sharing options...
Noel Smith Posted March 9, 2023 Share Posted March 9, 2023 Hi Camwader What a superb model! It looks so realistic. I live in Shefford, just down the road from you and would love to see your model in the flesh sometime. I have the Pocher Mercedes to build that has been in my stash since since the Eighties a bit like your kit you resurrected from storage. It might give me some inspiration to actually get and build it! 1 1 Link to comment Share on other sites More sharing options...
Camwader Posted March 9, 2023 Author Share Posted March 9, 2023 2 hours ago, Noel Smith said: Hi Camwader What a superb model! It looks so realistic. I live in Shefford, just down the road from you and would love to see your model in the flesh sometime. I have the Pocher Mercedes to build that has been in my stash since since the Eighties a bit like your kit you resurrected from storage. It might give me some inspiration to actually get and build it! Noel, I've sent you a PM 1 Link to comment Share on other sites More sharing options...
Camwader Posted March 9, 2023 Author Share Posted March 9, 2023 3 hours ago, Vesa Jussila said: I like photos and impressive model. Absolutely it's worth of time you used for that. And nice to see this not so typical colour. Vesa, The first real Alfa Monza that I saw was this colour, at a Silverstone Classic meeting around 2001. The vast majority are finished in red, so I wanted to be a bit different. I've seen photos on the internet of one or two other Pocher Monzas finished in this colour. 1 Link to comment Share on other sites More sharing options...
Lvp Posted March 9, 2023 Share Posted March 9, 2023 Can we please hear what she sounds like at idle! And how was the traction in the snow? You are a MASTER! 1 Link to comment Share on other sites More sharing options...
Camwader Posted March 9, 2023 Author Share Posted March 9, 2023 29 minutes ago, Lvp said: Can we please hear what she sounds like at idle! And how was the traction in the snow? You are a MASTER! Lvp - Thanks for the compliment. I don't know how familiar you are with Pocher Alfas, but they come with pistons and a crankshaft, so you can turn the starting handle and watch the pistons go up and down. Of course, to see this, you have to take the cylinder head off. If you want an accurate model with plumbing and wiring in place, then a removeable cylinder head is not really practical. So mine has no pistons, hence it's very quite at idle. Traction's great though with me pushing 😄 They also provide rudimentary crankshafts that are not connected to anything. Along with the 'working' brakes, these features are the sort of thing you'd find on a toy, not a quality model - in my opinion. Link to comment Share on other sites More sharing options...
Toryu Posted March 11, 2023 Share Posted March 11, 2023 That's just wonderful! What a masterpiece, what a focus on detail, and what a colour! 🙃 1 Link to comment Share on other sites More sharing options...
JeroenS Posted March 12, 2023 Share Posted March 12, 2023 That's rather lovely, and what a great colour! 1 Link to comment Share on other sites More sharing options...
theskits62 Posted March 15, 2023 Share Posted March 15, 2023 I only occasionally dip into the car section as i'm more of a plane/ship person but glad i did today !! That is really stunning, you feel like you could literally hop in and drive off. I used to have a few Pocher kits in my stash but let them go a few years ago, this is almost making me wish i'd kept a couple. 1 Link to comment Share on other sites More sharing options...
FunkyChiken Posted March 15, 2023 Share Posted March 15, 2023 It does look good in that blue, very sharp model, worth the 39 year wait! 1 Link to comment Share on other sites More sharing options...
desert falcon Posted March 19, 2023 Share Posted March 19, 2023 Certainly worth the wait!! 1 Link to comment Share on other sites More sharing options...
Yg Models Posted March 19, 2023 Share Posted March 19, 2023 (edited) big car, how about add fuel tank & motor, convert into RC. 😁 Edited March 20, 2023 by Yg Models 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now