Jump to content

Recommended Posts

Posted

MG34 Machine Gun w/Ammunition Belt (635020)

1:35 Eduard Brassin PRINT

 

boxtop.jpg

 

The MG34 was the primary machine gun used by the German forces during the majority of WWII, only replaced by the more advanced MG42 that was engineered to be cheaper and easier to manufacture than its predecessor.  It was designed by Rheinmetall and produced in the Spandau Arsenal, which gave rise to one of its nicknames, and was chambered for 7.92mm rounds that were fired from an open bolt, with a cyclical rate that started around 800-900 rounds per minute, but was changed to a selectable 600-1,000rpm in later variants, the lower rate principally provided to conserve ammunition and reduce the heat build-up in the barrel that could lead to warping.  The rounds weren’t prone to cooking off in a hot weapon however, as they weren’t fed into the chamber until the trigger was depressed again, but as a crew only carried around 1,800 rounds it was sensible to fire in short controlled bursts to maintain supplies.  Changing out a hot barrel was a two-man affair, and was one of the tasks that was simplified in the MG42, which included an oven-mitt-like glove to protect the operator’s hands.

 

Ammunition could be fed to the breech in different manners, starting with a 50-round modular length of reusable metal link that could be joined together to create longer lengths. A small drum mag clipped to the side of the breech contained 50 rounds that could be modified to take 75, or a cloth bag filled with rounds on link zig-zagged into the space could be used instead.  The infantry version of the weapon was usually mounted on a bipod attached to the front of the weapon, while the vehicle or static pivot lug was mounted centrally at the base of the barrel and clipped into the pintle-mount socket in its intended position.

 

635020.jpg

 

Although this set arrives in a flat package, the directly 3D printed parts are safe inside a clear plastic clamshell box inside the package, which also has a sticky pad inside to prevent the parts from rattling about. The parts are printed resin, attached to the base via thin tendril-like fingers that are easy to cut off and sand the little upstands away, leaving them ready for action.  This set includes a single highly-detailed MG34 that is protected between two risers, and a print-base of accessories that include a C-mag, a cloth bag and a length of unused link that is protected at each end by a C-shaped riser.  Construction is simple once the parts are liberated from their print-bases, and consists of deciding which ammunition source you intend to use with your model.  The instructions show the paint codes for each part of the model using Gunze codes, most of which will be metallic shades apart from the wooden butt-stock.

 

 

Conclusion

The crisp detail of this set will improve the look of any model you care to place it in, and it’s a simple upgrade into the bargain.

 

Highly recommended.

 

bin.jpg

 

Review sample courtesy of

logo.gif

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...