modelldoc Posted October 19, 2022 Share Posted October 19, 2022 Yes, Mach 2 is a hard job, but you can solve it. New decals are necessary, because the clear parts never clear. Three are in my collection: Avro York: https://www.flickr.com/photos/21603181@N08/51152834252/in/dateposted/ decals from Airfix Lancaster (from my stash) Convair 440: https://www.flickr.com/photos/21603181@N08/50500117653/in/dateposted/ decals from HaHen (Germany) special production Vickers Viscount: https://www.flickr.com/photos/21603181@N08/5326288543/in/dateposted/ decals from 26 decals Now the Britannia is in my stash and I must decide for the decals from AIM modelldoc 2 Link to comment Share on other sites More sharing options...
tomprobert Posted October 19, 2022 Share Posted October 19, 2022 As others have said, when you buy a Mach 2 kit you are going in with your eyes wide open and you certainly won’t be getting Tamiya quality. @Ad-4N the transparencies are indeed usually poor - I spent more time on the cockpit windows on the DC-8 I built than the rest of the kit. They did come up ok on the end, but it took sanding them back to almost wafer thickness to get them workable. I then decided to use decals anyway! If the quality is the same as the DC-8 then this 727 will be ok. Yes, some work required and there will no doubt be some elements that leave you scratching your head but other options are limited. Kendal’s kit was really poor and left a lot to be desired (that’s if you can find one!) and Welsh Models won’t float many’s boat as it’s a vac. With some aftermarket decals I reckon a good example can be built. Watch this space. Tom 4 Link to comment Share on other sites More sharing options...
cngaero Posted October 19, 2022 Share Posted October 19, 2022 Mach 2 kits are certainly not aimed at the shake and bake modeller, but they are a manufacturer that fills the gaps where other companies run a mile from. They are far from being unbuildable though. So far, I've built their York, Britannia and Argosy, with the VC10 just started and a Comet sitting waiting in the wings. Granted, non have been easy, but all have been a challenge, but in a good way. We should rejoice in the fact that Mach 2 actually fill these gaps where other manufacturers fear to tread and not just knocking everything they produce. The way I look at it is; a) Do I have a gap in my collection? Yes. b) Could I scratch build it? No. c) Do I mind putting a bit of work into a project? No. In cases like this, Mach 2 kits are a God send for me and many others. I hope I don't come across as being too harsh, but I feel very strongly about this subject. Mach 2 do their very best to provide us with the kits that we want. Granted they are not as refined as the likes of Tamiya or Hasegawa, but neither are their prices. With a bit of gentle support and encouragement, we may all get the gaps in our collections filled over time. I'm waiting patiently for a Handley Page Hastings. Rumour has it, they are interested in doing one in the next couple of years.Fingers crossed. 8 Link to comment Share on other sites More sharing options...
general melchett Posted October 19, 2022 Share Posted October 19, 2022 Quote The Argosy went together remarkably well considering the configuration of the aircraft. One thing I have found is the plastic used will stand some abuse. Must agree, the Argosy goes together rather well. Added to that I used a few aftermarket parts, 3D printed some wheels and Dart engine nacelles, John kindly gave me some Aeroclub props etc to enhance the thing. I've had several Mach 2s including the Comet, Argosy, Coleoptre, Valiant, BV-142, both Leducs, Sea Dart and Britannia and all have their good and bad points. The Britannia was the worst with badly warped centre fuselage halves and uneven wing root location stubs which wouldn't have mattered so much but the centre section was the one part I needed to use for an Argus conversion! Must agree that the 'clear' parts aren't the greatest and no two window openings seem to be the same shape, size or orientation.....but to be fair, most of us are aware of these shortcomings before buying. Look forward to seeing what you do with it Tom. 4 Link to comment Share on other sites More sharing options...
bentwaters81tfw Posted October 19, 2022 Share Posted October 19, 2022 28 minutes ago, cngaero said: I'm waiting patiently for a Handley Page Hastings. Rumour has it, they are interested in doing one in the next couple of years.Fingers crossed. I spoke with Didier a few years back about this, at that time he was not going to tread on Mel's toes, and Mel did in fact discuss letting Didier have is Hastings masters, though it came to nothing at the time. 'Not impossible' was Didier's words as a future project. I would have thought Mikro Mir might upscale their kit though. 1 Link to comment Share on other sites More sharing options...
tomprobert Posted October 19, 2022 Share Posted October 19, 2022 (edited) 14 minutes ago, general melchett said: Must agree that the 'clear' parts aren't the greatest and no two window openings seem to be the same shape, size or orientation.....but to be fair, most of us are aware of these shortcomings before buying. Look forward to seeing what you do with it Tom. Absolutely - and if we keep buying them we may get more of the lesser-kitted aircraft in the future as so eloquently put by @cngaero above. I'd love a Convair CV-880 or 990 one day in 1/72nd so I will most definitely support Monsieur Palix's efforts going forward. I have an AIM DC-7C conversion on the shelf of doom as we speak and predict even with Mach 2's reputation a 1/72nd DC-7 family is sure to be a good seller... and just imagine a Starliner! And rest assured as soon as I get my grubby little mitts on a 727 I'll dive right in! Tom Edited October 19, 2022 by tomprobert Typos 4 Link to comment Share on other sites More sharing options...
general melchett Posted October 19, 2022 Share Posted October 19, 2022 (edited) Quote and just imagine a Starliner! Absolutely, along with the Trident and BAC-111 families (I know Alan has them among his plans too but to be honest, the more the merrier). Must agree, a Convair 990 would be extremely welcome... Edited October 19, 2022 by general melchett typo 2 Link to comment Share on other sites More sharing options...
fightersweep Posted October 19, 2022 Share Posted October 19, 2022 Never built a Mach 2 kit before. Anyone built the Viscount as that's one I keep thinking about picking up? Wonder if they'd consider a Herald too. 727 sounds interesting. I don't mind bashing kits into submission so that concept doesn't bother me at all. Link to comment Share on other sites More sharing options...
26Decals Posted October 19, 2022 Share Posted October 19, 2022 It may be a silly questions but are there any pics of the 727-200 kit? I shall scale up my existing 1/144 727-200 laser decals if it turns out to be ok 3 Link to comment Share on other sites More sharing options...
tomprobert Posted October 19, 2022 Share Posted October 19, 2022 1 hour ago, 26Decals said: It may be a silly questions but are there any pics of the 727-200 kit? I shall scale up my existing 1/144 727-200 laser decals if it turns out to be ok Yes please - now we're talking! Haven't seen any sprue shots yet - I imagine keeping an eye on Airliner Cafe will be key,,? Tom Link to comment Share on other sites More sharing options...
maxdecal Posted October 19, 2022 Share Posted October 19, 2022 I would love to see decals for G-OSRA Oil Spill Response in both 1/144 and 1/72 scale https://www.airliners.net/photo/Oil-Spill-Response-T2-Aviation/Boeing-727-2S2F-Adv-RE-Super-27/6722891/L?qsp=eJwtjcEKAjEMRH9lydmLCB72pj%2BgB38gtIMW6zYkAS3L/ruxeHu8GWZWSm1xfPzWBTSTgTU9aEfCyi%2BjeaUn%2BrtpDqZW6mRSap0UJm0xRNOa%2BrlHmtlxSgniyH9/0Qz9RbA0Ru9xsg%2BAXgfT4Rg%2BF5PKYwPOpdK2fQH8RTOy Link to comment Share on other sites More sharing options...
Ray S Posted October 19, 2022 Share Posted October 19, 2022 2 hours ago, maxdecal said: I would love to see decals for G-OSRA Oil Spill Response in both 1/144 and 1/72 scale https://www.airliners.net/photo/Oil-Spill-Response-T2-Aviation/Boeing-727-2S2F-Adv-RE-Super-27/6722891/L?qsp=eJwtjcEKAjEMRH9lydmLCB72pj%2BgB38gtIMW6zYkAS3L/ruxeHu8GWZWSm1xfPzWBTSTgTU9aEfCyi%2BjeaUn%2BrtpDqZW6mRSap0UJm0xRNOa%2BrlHmtlxSgniyH9/0Qz9RbA0Ru9xsg%2BAXgfT4Rg%2BF5PKYwPOpdK2fQH8RTOy Not too much problem with windows on that one! It is a great scheme, I like it. Ray Link to comment Share on other sites More sharing options...
Evalman Posted October 19, 2022 Share Posted October 19, 2022 I'm tempted. I've built the Mach 2 Atlantic and was quite pleased with the end result. The biggest problem with that kit was one fuselage half being longer than the other. 1 1 1 Link to comment Share on other sites More sharing options...
VMA131Marine Posted October 20, 2022 Author Share Posted October 20, 2022 19 hours ago, Vingtor said: You could possibly take the nose and cabin windows from BPK's 737-800. And scratchbuild the rest... 😃 I built the Mach2 Falcon 20 kit many years ago. Awful... I have another which I will try one day - if I have the courage. Nils You could just graft on the whole nose from a BPK 737-200 or even a Heller 1/72 707 as all three aircraft used the same construction jigs to reduce costs. Link to comment Share on other sites More sharing options...
Vingtor Posted October 20, 2022 Share Posted October 20, 2022 5 hours ago, VMA131Marine said: You could just graft on the whole nose from a BPK 737-200 or even a Heller 1/72 707 as all three aircraft used the same construction jigs to reduce costs. Yes, I thought they would be the same. I have not checked the BPK 737 yet, but the Heller 707 fuselage is much wider than the Welsh Models 737. Nils 1 Link to comment Share on other sites More sharing options...
Smudge Posted October 20, 2022 Share Posted October 20, 2022 I've fancied a 1/72 727 for sometime, so this went straight on my Backorder list. Pan Am classic scheme for me Link to comment Share on other sites More sharing options...
Homebee Posted October 20, 2022 Share Posted October 20, 2022 (edited) Release expected for Mid-November 2022 - Product references & box arts. - ref. GP111L - Boeing 727-200 - Lufthansa Source: https://www.aviationmegastore.com/en/modelling/boeing-727-200-lufthansa-mach-2-gp111lh-191019.html - ref. GP111UNT - Boeing 727-200 - United Source: https://www.aviationmegastore.com/en/modelling/boeing-727-200-united-mach-2-gp111unt-191021.html - ref. GP111BA - Boeing 727-200 - British Airways Source: https://www.aviationmegastore.com/en/modelling/boeing-727-200-british-airways-mach-2-gp111ba-191020.html - ref. GP111USAF - Boeing 727-200 - US Air Force Source: https://www.aviationmegastore.com/en/modelling/boeing-727-200-us-air-force-mach-2-gp111usaf-191018.html - ref. GP111AF - Boeing 727-200 - Air France Source: https://www.aviationmegastore.com/en/modelling/boeing-727-200-air-france-mach-2-gp111af-191017.html - ref. GP111ALI - Boeing 727-200 - Alitalia Source: https://www.aviationmegastore.com/en/modelling/boeing-727-200-alitalia-mach-2-gp111ali-191016.html - ref. GP111PAA - Boeing 727-200 - Pan American Airlines Source: https://www.aviationmegastore.com/en/modelling/boeing-727-200-pan-american-airlines-mach-2-gp111paa-191015.html - ref. GP111TWA - Boeing 727-200 - Trans World Airlines Source: https://www.aviationmegastore.com/en/modelling/boeing-727-200-trans-world-airlines-mach-2-gp111twa-191014.html V.P. Edited October 20, 2022 by Homebee 2 Link to comment Share on other sites More sharing options...
tomprobert Posted October 20, 2022 Share Posted October 20, 2022 A 1/72 727 for around £70? Yes please! Price is very reasonable for such a large kit - this has made up my mind that one will be winging its way to me in due course. Tom Link to comment Share on other sites More sharing options...
VMA131Marine Posted October 20, 2022 Author Share Posted October 20, 2022 US$63 + shipping to the US; that seems quite reasonable. 3 Link to comment Share on other sites More sharing options...
jet-mech Posted October 20, 2022 Share Posted October 20, 2022 On 10/19/2022 at 1:16 PM, maxdecal said: I would love to see decals for G-OSRA Oil Spill Response in both 1/144 and 1/72 scale https://www.airliners.net/photo/Oil-Spill-Response-T2-Aviation/Boeing-727-2S2F-Adv-RE-Super-27/6722891/L?qsp=eJwtjcEKAjEMRH9lydmLCB72pj%2BgB38gtIMW6zYkAS3L/ruxeHu8GWZWSm1xfPzWBTSTgTU9aEfCyi%2BjeaUn%2BrtpDqZW6mRSap0UJm0xRNOa%2BrlHmtlxSgniyH9/0Qz9RbA0Ru9xsg%2BAXgfT4Rg%2BF5PKYwPOpdK2fQH8RTOy That's one of my aircraft. OSRA and OSRB were the last 727s off the production line. They are still going strong. I will be building both OSRA and OSRB for the company. I can't say I'm looking forward to the kit, but with all the scratch building, it's going to be a big job anyway!! 1 Link to comment Share on other sites More sharing options...
bentwaters81tfw Posted October 20, 2022 Share Posted October 20, 2022 Hopefully Didier will have some at Telford. Link to comment Share on other sites More sharing options...
VMA131Marine Posted October 21, 2022 Author Share Posted October 21, 2022 18 hours ago, bentwaters81tfw said: Hopefully Didier will have some at Telford. I thought that too, but did not see Mach 2 on the vendor list for Telford. Are they sharing a stand with someone else? Link to comment Share on other sites More sharing options...
bentwaters81tfw Posted October 21, 2022 Share Posted October 21, 2022 Usually share the stand with F-RSIN, but I don't see them listed either Link to comment Share on other sites More sharing options...
Homebee Posted October 21, 2022 Share Posted October 21, 2022 (edited) 29 minutes ago, bentwaters81tfw said: Usually share the stand with F-RSIN, but I don't see them listed either Another Brexit collateral dammage ? V.P. Edited October 21, 2022 by Homebee 1 Link to comment Share on other sites More sharing options...
Paul821 Posted October 21, 2022 Share Posted October 21, 2022 I was surprised to see a BA liveried option as I thought this was type not operated by BA. A quick internet proved that I was not wrong. It's a Conair Comair (South Africa) aircraft who use the BA branding. Edited to change type Conair (a film) with Comair the airline reference by @Homebee below) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now