Spiny Posted October 17, 2022 Share Posted October 17, 2022 The more I look at this the more it seems a good move to keep it shiny. It will work in your favour that British Green is a colour which reflects back well, not as well as black but not far off. Definitely keep it shiny The engine bay is looking very good too, well worth spending the extra time on it. The only thing which seems odd, and this is probably the camera, is that your British Green here seems lighter than the British Green I used on the VW van. 1 Link to comment Share on other sites More sharing options...
keefr22 Posted October 17, 2022 Share Posted October 17, 2022 2 hours ago, JeroenS said: And I still may turn it into a clunker Don't you dare.... 🤣 Keith 1 Link to comment Share on other sites More sharing options...
JeroenS Posted October 18, 2022 Author Share Posted October 18, 2022 9 hours ago, Spiny said: The only thing which seems odd, and this is probably the camera, is that your British Green here seems lighter than the British Green I used on the VW van. Probably a combination of camera, daylight photo lamps and the background. Link to comment Share on other sites More sharing options...
Anteater Posted October 19, 2022 Share Posted October 19, 2022 I made a Lotus 7 in BRG and that looked a different shade in every photo. There's probably something about the science of colours that explains it. Link to comment Share on other sites More sharing options...
JeroenS Posted October 21, 2022 Author Share Posted October 21, 2022 This week, I didn't have much energy to fiddle around in the engine bay, but this afternoon I had. Some sunshine and a beer may have helped there. I went ahead and put in the AC and the brake cylinder. When fitting it, I ended up cutting the vertical pieces of rod because they were in the way and you couldn't really see them anyway. I picked a resin greebly from my bag of truck greeblies, cut some protruding bits off of it and used it for an AC pump. The engine bay is about where I want it now. I need a radiator cap somewhere, and I think I'll add a washer bottle and a wiper motor, run some random wiring here and there, do some final detail painting, and call this done. I'm quite happy with this actually. 11 Link to comment Share on other sites More sharing options...
Neddy Posted October 21, 2022 Share Posted October 21, 2022 I'm not surprised you're happy with it. Very nice plumbing and wiring job, very neatly done. 1 Link to comment Share on other sites More sharing options...
Vesa Jussila Posted October 22, 2022 Share Posted October 22, 2022 Wiring looks really good. 1 Link to comment Share on other sites More sharing options...
JeroenS Posted October 23, 2022 Author Share Posted October 23, 2022 OK, I'm calling quits on the engine bay, I did all the stuff I said I wanted to do still, and I like how it turned out. Now, the first thing to do is try to polish out my dirty paw prints. Then put all the chrome bits on and do some detail painting on the exterior (mainly the lettering), not looking forward to that. Lastly, I'll make it look like it's been driven. I don't want to put it away all shiny, it's just not me 🙂 11 Link to comment Share on other sites More sharing options...
Fnick Posted October 23, 2022 Share Posted October 23, 2022 Lovely detail in there. It always impresses me how some wiring just makes an engine bay look far more convincing. Nick 1 Link to comment Share on other sites More sharing options...
JeroenS Posted October 24, 2022 Author Share Posted October 24, 2022 I added all the chrome pieces. Close up, you can see that this was a quick paint job. The orange peel is definitely there. Carefully painted the lettering on the sides which turned out reasonably well. I see now, looking at the picture above, that I forgot the Ford badge on the rear. I'm happy enough with the lettering on the front. Some more detail painting needed later, but I can now put in the lenses. Wheels are done as well. 10 Link to comment Share on other sites More sharing options...
Stickframe Posted October 24, 2022 Share Posted October 24, 2022 Hi Jeroen, your engine bay looks great - you really nailed it! You mentioned the orange peel, from the photos it doesn't look too bad. I saw your note on the previous page that you didn't wet sand etc. Aside from being a bit brighter, I wouldn't be surprised if the paint might look like what you'd see on a 1:1 after so many years? a daily driver? Slotted wheels look nice too! I'm looking forward to seeing this when you're done! Cheers Nick 1 Link to comment Share on other sites More sharing options...
Spiny Posted October 24, 2022 Share Posted October 24, 2022 I wouldn't get too worked up about the orange peel - I think most builds have this to a greater or lesser degree. Even if it is bothering you (and it sounds as though it isn't), too late to do anything about it now without risking further damage. It's always a balancing act anyway is polishing - too little and it barely makes a difference, too much and you burn through to the primer. And the tipping point between the two is crossed very, very quickly! Given how most of it has a decent shine on it anyway, and the bits showing orange peel are going to or already have bits of chrome and other detailing on I think you'll be fine - it's shaping up nice and good to see you being drawn to the shiny end of the spectrum 1 Link to comment Share on other sites More sharing options...
JeroenS Posted October 24, 2022 Author Share Posted October 24, 2022 25 minutes ago, Stickframe said: I saw your note on the previous page that you didn't wet sand etc. Thanks Nick, indeed I didn't wet sand because this build was scheduled to be a clunker but things turned out differently 🙂 13 minutes ago, Spiny said: I wouldn't get too worked up about the orange peel - I think most builds have this to a greater or lesser degree. Even if it is bothering you (and it sounds as though it isn't), too late to do anything about it now without risking further damage. It's always a balancing act anyway is polishing - too little and it barely makes a difference, too much and you burn through to the primer. And the tipping point between the two is crossed very, very quickly! Given how most of it has a decent shine on it anyway, and the bits showing orange peel are going to or already have bits of chrome and other detailing on I think you'll be fine - it's shaping up nice and good to see you being drawn to the shiny end of the spectrum Thanks, I'm not overly bothered about the orange peel, it doesn't show from normal viewing distance. I would have used different paint, had I wanted this to be truly shiny. The little VW Beetle I did a while back has been the only one where I really went for it, and it turned out great but it's not really my thing. Don't get your hopes up on the shiny part too much by the way, there will be some weathering on this thing. It will definitely have a daily driver look when I'm done. Link to comment Share on other sites More sharing options...
JeroenS Posted October 25, 2022 Author Share Posted October 25, 2022 Final WIP shots. Time to get this thing on the road. In the end, I didn't bother with custom plates and just put one of the supplied plates on. Revell have the nasty habit of providing 2 plates on the decal sheet but only providing one plate holder. I want to get this thing done today so I just left the front one off. I know, it's easy to cut a piece of card, paint it and stick the decal on but really, I already spent way more time on this than anticipated so I just want to get it done. I need to finish my low loader over in Revell Classic GB! Mind you, despite wanting to get this off the bench, I had a good time detailing the engine bay to a level I didn't get to for other cars I've built. Well, there haven't been that many actually. Anyway, next post is RFI. 8 Link to comment Share on other sites More sharing options...
JeroenS Posted October 25, 2022 Author Share Posted October 25, 2022 Alright, just some teasers then. I'll take better pics in natural light later, maybe tomorrow. This is the underside, it's on its wheels now and I won't be flipping it over ever again. The wheels were a bit of a pain to get on by the way. The system Revell made up to attach them is crap. If you ever build this, don't use the minescule metal pins that come with the kit. I should have taken better note of Anteaters build before I started. Also, the stance is a little silly. Again, I just jumped into this build. It may be a Starsky & Hutch thing but I don't really like it. Not going to loose a minute of sleep over it though. You can see that it has become a little more than a daily driver, my guess is there was a long trip through the desert or something, could have been a weekend trip to Vegas maybe. My photo lamps make every speck of paint on the body reflective, it doesn't look like this with the naked eye. Natural light will probably tone that down some. With sincerest apologies to @keefr22 and @Spiny. The shiny didn't take 🙂 6 1 Link to comment Share on other sites More sharing options...
keefr22 Posted October 25, 2022 Share Posted October 25, 2022 No need for apologies Jeroen - it's your model and you built it as you wanted. And tbh I actually really like the result, the dirt looks pretty good and not overdone! Great result and I enjoyed watching it come together! Keith PS I'm with you on the stance though!! 1 Link to comment Share on other sites More sharing options...
Anteater Posted October 25, 2022 Share Posted October 25, 2022 I like the weathering, just takes the shiny edge off it. Looking forward to the full RFI pictures. 1 Link to comment Share on other sites More sharing options...
JeroenS Posted October 26, 2022 Author Share Posted October 26, 2022 RFI here: Thanks very much for following along! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now