TANK63 Posted September 14, 2022 Share Posted September 14, 2022 Any other members with this illness. I tried to spray paint the other day struggled breathing with a protective mask, couldn’t get enough air coming through filter. Anybody the same and how did they manage? Link to comment Share on other sites More sharing options...
brianthemodeller Posted September 14, 2022 Share Posted September 14, 2022 I haven't been diagnosed with COPD but have developed a sensitivity to most of the chemicals we use (glue, thinners, resin dust etc) that results in very similar symptoms - acute shortage of breath and chest pains. I tried masks and even built a fume cabinet in my workshop but they weren't particularly effective so ended up giving up this form of modelling. Possibly not what you were hoping to read... That said, if it just the act of spraying then consider just brush painting acrylics? Link to comment Share on other sites More sharing options...
stevehnz Posted September 14, 2022 Share Posted September 14, 2022 1 hour ago, TANK63 said: Any other members with this illness. I tried to spray paint the other day struggled breathing with a protective mask, couldn’t get enough air coming through filter. Anybody the same and how did they manage? It isn't just time for a filter change maybe. They do have a finite life span & where I worked, the moment you could smell what you didn't want to, it was time for a change. Steve. Link to comment Share on other sites More sharing options...
Markh-75 Posted September 14, 2022 Share Posted September 14, 2022 My sister in law and my daughter dont come into my modelling room while I'm in there as they can't stand the vapours, smell of glue or thinners. I have asthma myself but these vapours dont bother me in the slightest! 1 Link to comment Share on other sites More sharing options...
Pete Robin Posted September 14, 2022 Share Posted September 14, 2022 Guilty as charged Tank. As has been said above, it may just be a fault on your mask. It could also be the disease progressing a bit more. Some folks hardly notice they have it. Others have the disease and it goes so far and develops no further. Some, like me, suffer with all sorts of shenanigans with it. Can't walk across the room some days, other days if the missus sprays an aerosol in the garden it sets me off choking and coughing even tho I'm indoors. It defo ain't fun. There is some good news tho. There are better inhalers and drugs than there were. There are many exercises that help too. If you are in GB you can maybe try to get your GP to send you to Pulmonary Rehab. That works for some folks really well. As for the modelling side, it's a case of trying different methods. If it is just the airbrush, maybe you can revert to paintbrushes? If like me, all of the products on the bench were giving me grief from fumes, dust etc. I, sadly had to pack it in. I pray that you don't. Keep battling, don't give up just yet. There's a good long way down the track yet. Regards Pete Link to comment Share on other sites More sharing options...
Alfisti Posted September 14, 2022 Share Posted September 14, 2022 I find that trimming the butterfly tree can really irritate and incur a reaction with my COPD.Everything else,including enamal and thinner fumes don't affect me,(no mask,love the smell!)reactions are down to the individual,and possibly the severity of the problem.I do find that I cannot walk as fast I was once able too,and if I walk into town,a distance of 2 kilometres,I have to have a few minutes respite approx half way through the journey. Dave. Link to comment Share on other sites More sharing options...
Markh-75 Posted September 15, 2022 Share Posted September 15, 2022 Or you could change to using Colourcoats paint mostly. Faster drying and minimum odour! I love the Colourcoats paint, goes on beautifully and dries beautifully too, deep and rich!👍😎 Yes I still use Humbrol or Revell enamel paint as well as Colourcoats ,but if possible I try to use Colourcoats for main colours. Maybe I’m just so used to the smell of thinners, paint and glue now that I don’t notice it anymore. I certainly don’t discredit those who do suffer from the condition, that wouldn’t be fair or decent of me. I have asthma myself though I have it well under control but I can still be a bit wheezy in the colder weather so I know what it’s like to be short of breath. That can be bad enough in itself. Link to comment Share on other sites More sharing options...
Graham Boak Posted September 15, 2022 Share Posted September 15, 2022 The additional benefit of Colourcoats is that it uses naphtha thinners which are less odorous than white spirit. It does work with Humbrol etc paints too, but the smell comes with the paint not just the thinner. Link to comment Share on other sites More sharing options...
TANK63 Posted November 11, 2022 Author Share Posted November 11, 2022 Thanks for the replies Link to comment Share on other sites More sharing options...
brianthemodeller Posted November 11, 2022 Share Posted November 11, 2022 I am currently trying my hand at figures (a 1/16 Roman Legionary) and have been hand brushing Valejo Model Air acrylics to good effect on the figure and no adverse affects on me. Might be worth a try? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now