Fastcat Posted September 2, 2022 Share Posted September 2, 2022 Still digging up the past - I made this one about 3 years ago. It originally started as a slot-car kit but it was built as a static model. I've always liked Astons, particularly the DBR1 but for some reason there never was a kit in 1/24, although Merit did a very ancient kit of the DB3S. Nowadays, Profil24 do a good kit of the DBR1 - at a price! My model came from a late lamented GP Miniatures resin kit but George Turner Models stepped in with a nice DBR1 in 1/32 so there is still a modern kit in this much neglected scale. The amount of work to produce a static model shouldn't be under estimated. I first had to get rid of the provision for a slot guide at the front and then completely scratch build an interior. The seats came from an Airfix "Monty's Humber", the only parts of that kit which I had lying around from an earlier day. I just knew they'd come in handy one day! I also made the exhaust and cover from metal which gave a much more realistic effect, being careful to match the hole pattern in the cover to the car depicted as this varied according to the race. The rest of the body was refined, especially around the front wing outlets and some semblance of an engine was added to avoid a "see through" look. It's not perfect but, hey, what is? I like it because it's an Aston and at the time, overcame the lack of a kit. With apologies for the photography! Dave 40 Link to comment Share on other sites More sharing options...
paulyoung666 Posted September 2, 2022 Share Posted September 2, 2022 Done a cracking job on that , love the colour !!!! 1 Link to comment Share on other sites More sharing options...
keefr22 Posted September 2, 2022 Share Posted September 2, 2022 That is rather lovely, tremendous little model! Keith 1 Link to comment Share on other sites More sharing options...
Neddy Posted September 2, 2022 Share Posted September 2, 2022 Niiice! Lovely colour and finish. Did you scratch the tonneau, if so what did you use? 1 Link to comment Share on other sites More sharing options...
Fastcat Posted September 2, 2022 Author Share Posted September 2, 2022 (edited) Hi Neddy, Thanks. No, the tonneau was included and moulded in with the kit. All I did was thinned it down and added the beading around the edge. If I'd had to make a tonneau from scratch I'd probably start with kitchen foil cut to shape and the creases added. Old fashioned I know, but the creases will stay in and the foil should hold its shape well. Dave P.S. I think the colour was Multona 0667 touch up spray. I've not used this paint before but it sprayed better than my usual Halford's brand and went on easily from the can. Apparently, Astons used a clear, green tinted lacquer over bare aluminium, hence the difficulty in matching the colour but I couldn't be bothered with all the experimentation involved. So I took the easy route! Edited September 2, 2022 by Fastcat Brain fade 3 Link to comment Share on other sites More sharing options...
Bengalensis Posted September 2, 2022 Share Posted September 2, 2022 That's a fantastic model! Very nice work, especially from that base. 1 Link to comment Share on other sites More sharing options...
Vince1159 Posted September 2, 2022 Share Posted September 2, 2022 Stunning looking Aston,lovely build... 1 Link to comment Share on other sites More sharing options...
Kitkent Posted September 2, 2022 Share Posted September 2, 2022 Looks just fantastic,I didn’t they made this one,what wheels did you use? I can’t rate these George Turner models highly enough. I’ve made a few of his Jags as static models and had to make complete interiors,but the kits are first class.Excellent! Chris. 1 Link to comment Share on other sites More sharing options...
Fastcat Posted September 2, 2022 Author Share Posted September 2, 2022 (edited) Hi Chris and thanks for the nice words. I can't remember the exact wheels except that they were p/e. I think that they came with the kit. The tyres were certainly the kit tyres suitably scuffed. The wheels in GP Miniatures early kits were very good but later ones somehow looked a little wrong. I'm not sure why. The difference with the GPM over the George Turner Models kits is that GPM included wheels and a good deal of p/e while George Turner's were resin only. This Aston is a little larger than 1/32 which doesn't worry me but in its original purpose as a slot-car would put purists off, being closely bound by rules. Georges are more accurate but he's been known to make them a bit on the wide side. Dave Edited September 2, 2022 by Fastcat 2 Link to comment Share on other sites More sharing options...
stevehnz Posted September 2, 2022 Share Posted September 2, 2022 That is a super job on this kit, just the way they should look imho. I've long had a soft spot for these cars after reading this book as a kid, maybe I need to do something about that. Steve. 1 Link to comment Share on other sites More sharing options...
dnl42 Posted September 3, 2022 Share Posted September 3, 2022 Excellent work on that! Nice touch with the AM badge on the base. 1 Link to comment Share on other sites More sharing options...
klubman01 Posted September 3, 2022 Share Posted September 3, 2022 That is a great result. Well done. Trevor 1 Link to comment Share on other sites More sharing options...
Fastcat Posted September 3, 2022 Author Share Posted September 3, 2022 Hi Steve and many thanks. That looks like a very well thumbed book! I'm not sure why Astons have had such a poor coverage apart from those connected with the Bond theme. Maybe they aren't mainstream enough. As far as I know, the only modern kits in 1/24 are in resin and by Profil, although Fernando Pinto does a Robin Hamilton creation. My car is by GP Miniatures but I think it is no longer available. GP Miniatures was a one man concern run by Graham Poulson, hence the GP which didn't stand for Grand Prix. His models, originally meant for slot car use, were mainly of Aston Martins and contained a lot of p/e. They were nice models, nearly good enough for statics but quite expensive. He eventually became disillusioned with them not selling well enough to make a living and sold the moulds to Pendle Slot Racing who still market them. I was lucky enough to buy one of his early kits before he gave up. Thanks dnl42. The badge was a lapel badge bought on eBay. I pulled off the pin with a pair of pliers and stuck it to the base with Araldite. Thanks Trevor. Glad you liked it and the only way I could get that version of a DBR1. Dave Link to comment Share on other sites More sharing options...
geedubelyer Posted September 3, 2022 Share Posted September 3, 2022 Beautiful 😍 1 Link to comment Share on other sites More sharing options...
Fastcat Posted September 3, 2022 Author Share Posted September 3, 2022 Many thanks geedubelyer. Dave Link to comment Share on other sites More sharing options...
desert falcon Posted September 4, 2022 Share Posted September 4, 2022 Nothing to apologize for, both the Aston and the photos are looking fantastic 👍 Link to comment Share on other sites More sharing options...
Fastcat Posted September 4, 2022 Author Share Posted September 4, 2022 Thank you very much desert falcon. Much appreciated. Dave 1 Link to comment Share on other sites More sharing options...
HOUSTON Posted September 4, 2022 Share Posted September 4, 2022 Dave, What a RESPLENDENT looking Aston Martin DBR1. Truly GORGEOUS looking model and your photos are SUPERB too. Link to comment Share on other sites More sharing options...
Fastcat Posted September 4, 2022 Author Share Posted September 4, 2022 Many thanks HOUSTON, I very much appreciate your kind words. Graham Poulson (the master modeller) captured the looks just about right and without his input it wouldn't be the same. I believe he started off with the very ancient Scalextric model and worked it up from there. I'm just glad he did! Dave Link to comment Share on other sites More sharing options...
Bandsaw Steve Posted October 2, 2022 Share Posted October 2, 2022 Beautiful! ❤️ In my opinion the best looking car ever made. I really enjoyed seeing this. Thanks for posting. 1 Link to comment Share on other sites More sharing options...
Fastcat Posted October 2, 2022 Author Share Posted October 2, 2022 Hi Steve and thanks. Yes, I've always liked the DBR1 and it's still a stunning shape. Hard to believe just how old it is. Got to be one of my all-time favourites. Dave Link to comment Share on other sites More sharing options...
Vesa Jussila Posted October 2, 2022 Share Posted October 2, 2022 One my favourite Astons. Really nicely built. 1 Link to comment Share on other sites More sharing options...
Noel Smith Posted November 16, 2022 Share Posted November 16, 2022 Outstanding model. 1 Link to comment Share on other sites More sharing options...
perdu Posted December 2, 2022 Share Posted December 2, 2022 I dont know why I miss looking in RFI but I really have to apologise for missing this delightful Aston, Dave. As always with your models the finish is immaculate, it's lovely. 1 Link to comment Share on other sites More sharing options...
Fastcat Posted December 2, 2022 Author Share Posted December 2, 2022 Hi Bill, Many thanks for the kind words. Coming from a skilled scratch builder makes them even more special. Dave 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now