Eduard F-15E/I/K Wheels (648745 for GWH) 1:48

[Mike]

F-15E/I/K Wheels (648745 for GWH)

1:48 Eduard Brassin

 

 

Kit wheels are generally in two halves, which means you have the resultant joins to deal with, possible mould-slip issues on single part wheels, and sometimes less than stellar detail due to the moulding limitations of styrene injection technology, especially in the tread department.  That's where replacement resin wheels come in, with their lack of seamline and superior detail making a compelling argument.  They are also usually available at a reasonable price, and can be an easy introduction to aftermarket and resin handling, as they are usually a drop-in replacement.

 

 

This set includes three resin wheels for the nose and main gear legs, plus a sheet of pre-cut kabuki tape masking material (not pictured) to allow you to cut the demarcation between the hubs and tyres with little effort.  The wheels are attached to their casting blocks at the bottom where you’ll also find a very slight sag to the tyres, indicating the weight of the aircraft on the compressible air and rubber parts.  Removal from the block is achieved by a quick whizz with a razor-saw, taking care to avoid breathing in the dust as it can be harmful if it gets deep in your lungs.  Don’t say I didn’t warn you.

 

Highly recommended.

 

 

Review sample courtesy of