Marklo Posted February 18, 2023 Share Posted February 18, 2023 That’s the two kittens. Again a nice size in 1/28. Link to comment Share on other sites More sharing options...
Colin W Posted February 18, 2023 Share Posted February 18, 2023 Hi @trickyrich, Well we were putting away the Xmas decorations when Mrs W moved the sofa and said gosh 'Thats a big one'. 'Are you going to build it or do we have to live round a cardboard box for the next 10 years?' So it's been hidden behind the sofa since we returned to the England in 2020, waiting for an opportunity to get built. I was planning on the 'Big and British GB' last year but there was no way I could see it being done in the time available so I built 1/48 Lancaster instead. So I know you set the limit for aircraft in this GB at >1/48 but you did say that you would make exceptions for some 'Big' subjects . Well this is 1/48 but it's quite big. In fact its bigger than my work bench and a lot bigger than a 1/48 Hurricane. And almost as big as a 3 seat sofa. The main part is the single piece fibreglass wing and fuselage but everything else is resin. There are lots of bits! Only a few decals but Masks are provided for the main colours, and the instructions are on CD. So there you have it. Am I allowed in? 9 Link to comment Share on other sites More sharing options...
galgos Posted February 18, 2023 Share Posted February 18, 2023 Wow, wow, wow!! It would be a Yes from me!! 😆 (but the rules say 1/32 or larger!) 🥲 1 Link to comment Share on other sites More sharing options...
Ned Posted February 18, 2023 Share Posted February 18, 2023 You need a bigger bench. 1 Link to comment Share on other sites More sharing options...
Ned Posted February 18, 2023 Share Posted February 18, 2023 6 hours ago, Marklo said: Scaled the Wight just for pig iron. As you can see in 1/28 ( to match my revell DR1) it still fits nicely into an A4 page. Must see what the kitten look like. Good luck with that! 1 Link to comment Share on other sites More sharing options...
trickyrich Posted February 18, 2023 Author Share Posted February 18, 2023 2 hours ago, Colin W said: Hi @trickyrich, Well we were putting away the Xmas decorations when Mrs W moved the sofa and said gosh 'Thats a big one'. 'Are you going to build it or do we have to live round a cardboard box for the next 10 years?' So it's been hidden behind the sofa since we returned to the England in 2020, waiting for an opportunity to get built. I was planning on the 'Big and British GB' last year but there was no way I could see it being done in the time available so I built 1/48 Lancaster instead. So I know you set the limit for aircraft in this GB at >1/48 but you did say that you would make exceptions for some 'Big' subjects . Well this is 1/48 but it's quite big. In fact its bigger than my work bench and a lot bigger than a 1/48 Hurricane. And almost as big as a 3 seat sofa. The main part is the single piece fibreglass wing and fuselage but everything else is resin. There are lots of bits! Only a few decals but Masks are provided for the main colours, and the instructions are on CD. So there you have it. Am I allowed in? Allowed in!!! You need your head read! I think straight up you'll get the prize for bringing the biggest beast along....that's for sure!! But welcome aboard........now this is really going big........just hope you have a shelf big enough for it! 2 1 Link to comment Share on other sites More sharing options...
JeroenS Posted February 18, 2023 Share Posted February 18, 2023 Holy smokes @Colin W!! That'll be an awesome build... 1 Link to comment Share on other sites More sharing options...
Colin W Posted February 19, 2023 Share Posted February 19, 2023 Thanks all. It looks like a lot of work but should be fun. I've had a good look for other builds but although I found a started one here on BM, I haven't found a finished one yet. It seems that I will be sailing uncharted waters! Colin. Link to comment Share on other sites More sharing options...
Mjwomack Posted February 19, 2023 Share Posted February 19, 2023 6 hours ago, Colin W said: Thanks all. It looks like a lot of work but should be fun. I've had a good look for other builds but although I found a started one here on BM, I haven't found a finished one yet. It seems that I will be sailing uncharted waters! Colin. I'd say that this is fast becoming the definitive Concorde thread Amazing what turns up in KUTA, photos and discussion of nose profile etc. galore!! 1 1 Link to comment Share on other sites More sharing options...
Back in the Saddle Posted February 19, 2023 Share Posted February 19, 2023 That is an incredible looking model - hopefully without the multiple issues that affect the 1/72 Airfix/Heller/Revell kit… 1 Link to comment Share on other sites More sharing options...
Marklo Posted February 21, 2023 Share Posted February 21, 2023 On 2/18/2023 at 6:42 PM, Colin W said: Am I allowed in? Well if it were me I’d say yes; but won’t you have to move to a bigger house? 1 Link to comment Share on other sites More sharing options...
Colin W Posted February 21, 2023 Share Posted February 21, 2023 On 2/19/2023 at 7:21 PM, Back in the Saddle said: hopefully without the multiple issues that affect the 1/72 Airfix/Heller/Revell kit… Yes I have had an Airfix 1/72 in the stash for 20 years and the issues around the nose are well documented including your own excellent build log on here. This will not have those issues but I'm sure a few others will come up along the way. On 2/18/2023 at 9:40 PM, trickyrich said: hope you have a shelf big enough for it! A shelf is easy, its finding the wall to put the shelf on which is the issue. 33 minutes ago, Marklo said: won’t you have to move to a bigger house Under normal circumstances yes, but I've decided to throw the kids out which will generate more space. 6 Link to comment Share on other sites More sharing options...
Marklo Posted February 21, 2023 Share Posted February 21, 2023 19 minutes ago, Colin W said: yes, but I've decided to throw the kids out which will generate more space. A perfectly practical decision. Mine’s 25 but I haven’t managed it yet… 4 Link to comment Share on other sites More sharing options...
Alan P Posted March 26, 2023 Share Posted March 26, 2023 Change of plan! I'd like to enter with the 1/32 Italeri F-35 as an F-35I Adir. I've already started it and only got as far as the cockpit: I think this is well within the usual 25% rule, but would like to check if ok @trickyrich? If not, I have a 1/144 Revell Z1 destroyer (Fletcher-class) which would fit the bill! Link to comment Share on other sites More sharing options...
Alan P Posted March 26, 2023 Share Posted March 26, 2023 On 12/22/2022 at 10:50 PM, FG2Si said: Well, it's the 1/32 section of my stash... Please, remember me in your will 😂 3 Link to comment Share on other sites More sharing options...
trickyrich Posted March 27, 2023 Author Share Posted March 27, 2023 @Alan P that will be fine, I know there's plenty left to do.....plus you could always do the wee Destroyer once you have finished the F-35! 1 1 Link to comment Share on other sites More sharing options...
trickyrich Posted April 3, 2023 Author Share Posted April 3, 2023 ...and a "No I will not be building it" comment....but I have just ordered the new JetMADS AJ-37 Viggen!! 🥰 It's going to be awesome and even comes with those huge Robots!!! Another reason I won't be building it as it's not released until late August. 2 Link to comment Share on other sites More sharing options...
Col. Posted April 7, 2023 Share Posted April 7, 2023 On 4/3/2023 at 9:08 AM, trickyrich said: ...and a "No I will not be building it" comment....but I have just ordered the new JetMADS AJ-37 Viggen!! 🥰 It's going to be awesome and even comes with those huge Robots!!! Another reason I won't be building it as it's not released until late August. So, in other words, you're simply showing off your latest purchase Sure it'll be good for the SAAB/Scania GB though 1 Link to comment Share on other sites More sharing options...
trickyrich Posted April 7, 2023 Author Share Posted April 7, 2023 15 hours ago, Col. said: So, in other words, you're simply showing off your latest purchase Sure it'll be good for the SAAB/Scania GB though I am thinking about it, though it would probably be the JA version.......either way both a very big builds, 4 months may not be enough time!!! 1 Link to comment Share on other sites More sharing options...
trickyrich Posted April 15, 2023 Author Share Posted April 15, 2023 normally i would only remain everyone about a GB/STGB a week of 2 out from the start, but in this case it's probably a good idea. Being it is a very long and physically large build then it probably warrants it. So with 5 week to go it's probably time to start clearing the bench space for these epic builds. Unfortunately for me I have had to start one of my planned builds as I need to be completed for my club GB and being the more difficult of the 2 she's well under way. So I'll have to check the stash for another 1/32nd beastie....not too sure what it'll be yet....... a Viggen? As for the started build, she's the "Splinter MiG", I have yet to finish off creating all the masks but at least the base model is underway....and want a beast it is too. Not as in it's a difficult build but more it's a huge steaming pile of !! Trumpeter at their finest....nothing really fits properly and you have huge gaps to fill, but the worse part is the front fuselage section is completely the wrong shape and the model is nearly a 1" to short! Really don't waste your time or money on this model, it's not worth it.....the only reason I have it this desperate desire to build a 1/32nd "Splinter MiG". Plus the funniest bit is the reviewer of this model say's it's "definitely the best MiG-21 kit produced to date" and is highly recommended!!! 🤣 There were probably people who recommended the Plague as well! Anyway her are some pics... the lower wing gaps are filled with plastic strip... ....don't ask....... ...the Red Fox panels are the best bit of the model! 4 1 Link to comment Share on other sites More sharing options...
Enzo the Magnificent Posted April 15, 2023 Share Posted April 15, 2023 I will be building a Special Hobby 1/32 Tempest II. I have the Hi-Tech boxing with a lot of resin included. The only thing missing is an open engine compartment. I received the CMK set from the Big H today so I'm good to go. 4 Link to comment Share on other sites More sharing options...
trickyrich Posted April 16, 2023 Author Share Posted April 16, 2023 24 minutes ago, Enzo the Magnificent said: I will be building a Special Hobby 1/32 Tempest II. I have the Hi-Tech boxing with a lot of resin included. The only thing missing is an open engine compartment. I received the CMK set from the Big H today so I'm good to go. Oooo that does sound tasty!!! I am very tempted to bring along either a 1/35th Kitty Hawk Blackhawk/Seahawk or Trumpie Mi-24 as the #2 build...will have to wait as see what pops up on the bench..... 2 Link to comment Share on other sites More sharing options...
Stew Dapple Posted April 16, 2023 Share Posted April 16, 2023 I'll be wading in with the Special Hobby 1/32 Westland Whirlwind, it was a present from a friend quite a while ago and has just been sitting there collecting aftermarket ever since I think it's overdue an airing. Cheers, Stew 4 Link to comment Share on other sites More sharing options...
stevej60 Posted April 16, 2023 Share Posted April 16, 2023 Two to choose from the stash,but Trumpeter's 1/32 Mustang RAF with full invasion stripes is top of the list for now. 4 Link to comment Share on other sites More sharing options...
galgos Posted April 16, 2023 Share Posted April 16, 2023 I can say two things with certainty: 1. it will be 1/32 2. it will be a Hawker, BUT will it be an AlleyCat resin Hawker Fury biplane, a PCM injection moulded Hurricane I.......or an Echelon vac-form Hunter?! Decisions, decisions......and no, it won't be all of them! 1 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now