Jump to content

Grumman F-14D Tomcat Interior 3D Decal (QD32033 for Trumpeter) 1:32


Recommended Posts

Grumman F-14D Tomcat Interior 3D Decal (QD32033 for Trumpeter)

1:32 Quinta Studios

 

boxtop.jpg

 

When Quinta’s innovative products first came to our attention, they caused quite a stir, as well they should.  The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease.  But decals?  These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of elevation as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces and metallic-effect hardware, and often including cushions and seat belts in the set.

 

instructions.jpg

 

Each set arrives in a ziplok bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition.  The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim.  Additional hints and instructions are also included, marking out parts needing bases, kit parts that are used or replaced and other useful tips.  The technical instructions in the text-based, giving additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue.

 

qd32033.jpg

 

Although you are advised to use Super Glue (CA) to attach the decals to the surface permanently, preparation is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal.  A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible.

 

example.jpg

 

This set is patterned for the big Trumpeter Tomcat, love it or hate it.  The set comprises four sheets of decals, containing two superb individual instrument panels with MFDs with shiny screens; side consoles that bristle with switches and levers; additional black boxes and switch-panels; levers; control column buttons; sidewall equipment and greenish insulation; and a full upgrade of the ejection seats including cushions, seatbelts for both the pilot’s convenience and safety.

 

Conclusion

The detail on the parts is incredible, even down to the infinitesimal switches, realistic screens, seat cushions and impressive overall crispness of the set.  This cockpit deserves a crystal-clear or opened canopy to show off the details.

 

Very highly recommended.

 

bin.jpg

 

Review sample courtesy of

logo.jpg

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...