bar side Posted November 22, 2022 Author Share Posted November 22, 2022 I fancied putting the HARM missiles out on the outer pylons. I assumed these pylons would be the shape of the Sargent Fletcher tanks So out with the plasticard and started making them up. The rails came with the kit Lots to hang on the underside. Better get a flat coat on and then they can all go on 2 Link to comment Share on other sites More sharing options...
Mark V Posted November 23, 2022 Share Posted November 23, 2022 On 11/19/2022 at 3:58 AM, bar side said: What about F-4G load out? I see a lot of models with Sargent Fletcher tanks on the outer pylons. But photos seem to suggest 3 Aim7s, ALQ pod, 4 Aim9s and two AGM88 HARMs on the outer pylons? Plus centre line tank. This one seems to have Aim9s only on one side and something else on the other side. The F model will be a bit more basic, Fletcher tanks, 4 Aim7s and 4 Aim9s, maybe centre line tank too I kind of lost track of these builds for a while. You’re moving pretty quickly through them. Looks like the G in the photo might be going to, or returning from, an airshow static display. In the photo you see HARMs, 2 AIM-9Ps and a travel pod on the right inboard, ALQ-131 ECM pod in the left forward AIM-7 well, left inboard has the AGM-45 Shrike (predecessor to the HARM), and the McDonnell-Douglas High Speed centerline tank. It does not look like there are any AIM-7s in the aft wells. This is not a “typical” load, but is interesting. Both jets are looking great. Love the lights. I’m terrible with electronics and soldering so I would not try this myself. 1 Link to comment Share on other sites More sharing options...
bar side Posted November 23, 2022 Author Share Posted November 23, 2022 Flat coat sprayed and pylons etc attached. Bit of a problem with the flat coat though. I sprayed it with a rattle can in a cold garage and it has puddled and run a little. Watermarks on the wing root, outer wing & base of the tail. Tempted to get something on there to take those away and touch up the matt coat indoors in a day or so. Just the AGM-88s to go on the scratch outer pylons Link to comment Share on other sites More sharing options...
bar side Posted November 24, 2022 Author Share Posted November 24, 2022 Tonight’s bits - painting the second set of seats. They still need the top handles making, fitting & painting. Was going to make some in winter rather than try the resin bits again Managed to fix the watermarks left by the first matt coat. I kept the rattle cans in and warmed it up and sprayed indoors. It dried better and sorted out the problem. It’s getting too cold & damp to spray in the garage without a heater. So the AGM-88s are fitted. They may hang a little low but it could be ok So i think the Weasel is about done. More to do to finish the F model - more stencil decals to go, finish and fit the seats and finish and add the weapon load. But I think the end is in sight. Then I need to set up and do photos with the dioramas. 2 Link to comment Share on other sites More sharing options...
bar side Posted November 25, 2022 Author Share Posted November 25, 2022 Got out some friends today to meet the new builds. My two German Phantoms - RF-4E and F-4F And the partner in crime to the Spang Weasel, the F-16C I had a look at an idea I had for lights in photos and tried this. Looks ok for a start The F model is still getting some stencils on, and the seats got their over head handles. Just need to paint them now 4 Link to comment Share on other sites More sharing options...
Lord Riot Posted November 25, 2022 Share Posted November 25, 2022 These are lovely, cracking collection there! 1 Link to comment Share on other sites More sharing options...
bar side Posted November 25, 2022 Author Share Posted November 25, 2022 Cheers @Lord Riot looking forward to seeing your Weasel & RF-4 together soon 1 Link to comment Share on other sites More sharing options...
bar side Posted November 27, 2022 Author Share Posted November 27, 2022 Seat handles have been finished off so both Phantoms have seats. The F model has had some more stencils added & I think I will call the, done. Weapons are coming together. The centre line tank is getting primer, mainly to cover up the mounting slot. The whole thing needs a flat coat and will be about done. I was going to use intake FOD covers and rbf tags, but they wouldn’t really be on if the lights are working, so I will see. 3 Link to comment Share on other sites More sharing options...
bar side Posted November 27, 2022 Author Share Posted November 27, 2022 Tank on, sat on her wheels and the lights still work - bonus! 3 Link to comment Share on other sites More sharing options...
bar side Posted November 30, 2022 Author Share Posted November 30, 2022 So that is two complete models, fully weapon loaded. I need to get dioramas set up & do some pictures for a RFI soon. But as of today Thanks for looking! 2 Link to comment Share on other sites More sharing options...
bar side Posted December 4, 2022 Author Share Posted December 4, 2022 I got some pictures today, so I have put up an RFI. Thanks for the help & encouragement along the way! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now