Patrik Posted July 3, 2022 Share Posted July 3, 2022 (edited) Aeroclub’s Gloster Gauntlet, according to Scalemates issued in 1994, was my first shortrun after I restarted my modelling carrier almost 23 years ago. Found it, together with its Hawker Woodcock stablemate, hiding in the second hand corner of the local hobby shop. It not only introduced me to the world of shortruns, but thanks to the Aeroclub address inside the box, also to the world of more Aeroclub kits, white metal accessories, mail orders and credit card payments. Time flies. As most of my early kits, Gaunlet is now due for replacement. First, I wanted to replace it with the more contemporary (2008) AZ kit, which is not bad, coming from the times when AZ produced honest shortruns with PE and resin parts. However, the kit is not without shortcomings, so when I was able to lay my hands on relatively cheap Aeroclub Gauntlet (discounted, because the upper wing was missing in the box), I decided for kitbashing. Fuselage by AZ, flying surfaces by Aeroclub (upper wing cannibalized from my old Gauntlet), remaining parts combination of both, plus some leftovers from my earlier Airfix Swedish Gladiator build. Gauntlet belongs to the few interwar airplanes excellently covered by printed references. I am going to build it as K7810 from 213 Squadron using the marvellous Model Alliance decals. For unknown reason, all references but one show the front of the 213 Squadron fuselage markings rounded and K7810 with two-bladed wooden propeller, example below. The only photo, that I know, shows the front of the fuselage markings clearly straight and the propeller with confidence tree-bladed. Fortunately, the decals have it right. Wheel discs are in my opinion neither black, nor yellow. Blue would be my best estimate unless I reveal new information later. And I think by now, you have already guessed, why the hornet in the title. Edited December 26, 2022 by Patrik 12 Link to comment Share on other sites More sharing options...
Dave Slowbuild Posted July 3, 2022 Share Posted July 3, 2022 I still have an Aeroclub Gauntlet in the stash, 20+ years since I bought it…. Really should give it a go! Regarding K7810, wouldn’t the wheel colour match that of the fin? If the fin’s painted that would make that aircraft the flight leader, ie yellow flight. Other aircraft in the flight would have yellow wheels? Link to comment Share on other sites More sharing options...
Patrik Posted July 3, 2022 Author Share Posted July 3, 2022 Seems by far too dark to me (too little contrast with the tyre even in the shadow) for yellow on the photo. However, plenty of time until the decision, I still plan doing some research. 1 Link to comment Share on other sites More sharing options...
Marcel Posted July 3, 2022 Share Posted July 3, 2022 Hi Patrik, incredible: I have just disassembled my old Aeroclub Gauntlet to "build her better" - BTW I still think the Aero kit is nicer than the AZ one. Good luck with the build. 1 Link to comment Share on other sites More sharing options...
Patrik Posted July 4, 2022 Author Share Posted July 4, 2022 12 hours ago, Marcel said: Hi Patrik, incredible: I have just disassembled my old Aeroclub Gauntlet to "build her better" - BTW I still think the Aero kit is nicer than the AZ one. Good luck with the build. Ha, unfair competition, I see. As I know you, I guess you will be posting the result in RFI just by the time I will be closing the fuselage😀. However, in the meantime you can advice me on the best method for striping the old paint from the upper wing of my old Gauntlet, I have never done it before and would like to avoid re-inventing the wheel. I agree Aeroclub Gauntlet is nicer than AZ. Except for the fuselage and interior and therefore my kitbash. I hope I am not forced to change my mind regarding the interior after I start assembling it. Link to comment Share on other sites More sharing options...
Smudge Posted July 4, 2022 Share Posted July 4, 2022 (edited) Lovely little project. I am surprised that the Aeroclub wings are considered to be better. Thinner perhaps? 15 hours ago, Dave Slowbuild said: Regarding K7810, wouldn’t the wheel colour match that of the fin? If the fin’s painted that would make that aircraft the flight leader, ie yellow flight. Other aircraft in the flight would have yellow wheels? I would tend to agree with Dave. However, I know this is your area of interest, so I'll be interested to see what decision you decide on. Following Edited July 4, 2022 by Smudge Link to comment Share on other sites More sharing options...
roginoz Posted July 4, 2022 Share Posted July 4, 2022 Paint stripping ? Spray the wing in oven cleaner, seal in a plastic bag and leave overnight. Did a wonderful job on stripping the wrong colour red off my Fairey Firefly drone. First time I had tried it, and it worked a treat, only minimal clean up afterwards under a tap on low pressure. Brilliant job ! HTH Rog 1 Link to comment Share on other sites More sharing options...
Marcel Posted July 4, 2022 Share Posted July 4, 2022 Rog is right - or you can use Purisol (don’t know if it’s available outside CZ). Mine will be a long term project, slowly preparing the struts and there are a lot of them... 1 Link to comment Share on other sites More sharing options...
Patrik Posted July 4, 2022 Author Share Posted July 4, 2022 Thanks for the hints, guys. @Smudge I am going to make a photo report comparing the major parts in next days. In my opinion Aeroclub surfaces are more convincing. 1 1 Link to comment Share on other sites More sharing options...
Patrik Posted July 5, 2022 Author Share Posted July 5, 2022 (edited) Public holiday here, raining from early morning. How typical... So, why AZ fuselage? Richer and crispier detail, though some of the panel lines need correcting (AZ is the less beige of both). Fuselages fit surprisingly well, though AZ is about half a millimeter higher, Why Aeroclub wings and empennage? The fabric representation is by far and wide nicer, trailing edges sharper. Wheels - AZ is clear winner. Propeller from Airfix Gladiator (grey) is the favourite one of mine. AZ has wrong shape of blades, and Aeroclub is too massive. And engine cowling? I for sure prefer Aeroclub, though it is going to be tough job. AZ is too Gladiatorish - too deep and too bulky. Edited July 5, 2022 by Patrik 6 Link to comment Share on other sites More sharing options...
Paul Thompson Posted July 5, 2022 Share Posted July 5, 2022 Propellers, if you're happy using the Airfix one then fine of course, but personally I'd first (because it's there) have a bash at filing/sanding down the Aeroclub item. By the time the blades are thin enough I think it will all look the right size and shape too. Anyway, you've prompted me to pull mine from the stash and I think I'll have a go at it too, along with the Pegasus kit in the same box. BTW, in my boxing here's also an alternative 2-blader white metal prop. If it's a while since you built it, I'll take the liberty of reminding you to beware of the AZ struts. Although similar subjects they did in that period were otherwise very nice, they never seemed to get the knack of producing the right length struts, and between differebt subjects it was a toss up as to if it would be the centre section or interplane struts that were too long. Can't remember which in this case, even though I built two of them, but I do remember it was certainly the case. I'll attempt to save the Aeroclub wheels. I'll try scribing a line within the tyre position with a compass cutter, then if that works I'll punch a small plastic disc for the centre. And drill a small blind hole for the valve access . But then, I'm cheap that way. Looking forward to seeing what you get up to with this. Paul. 1 Link to comment Share on other sites More sharing options...
Patrik Posted July 6, 2022 Author Share Posted July 6, 2022 (edited) On 7/5/2022 at 1:29 PM, Paul Thompson said: Propellers, if you're happy using the Airfix one then fine of course, but personally I'd first (because it's there) have a bash at filing/sanding down the Aeroclub item. By the time the blades are thin enough I think it will all look the right size and shape too. Anyway, you've prompted me to pull mine from the stash and I think I'll have a go at it too, along with the Pegasus kit in the same box. BTW, in my boxing here's also an alternative 2-blader white metal prop. If it's a while since you built it, I'll take the liberty of reminding you to beware of the AZ struts. Although similar subjects they did in that period were otherwise very nice, they never seemed to get the knack of producing the right length struts, and between differebt subjects it was a toss up as to if it would be the centre section or interplane struts that were too long. Can't remember which in this case, even though I built two of them, but I do remember it was certainly the case. Thanks a lot for the warning, Paul. Checked the Aeroclub struts and they are not as much better (I mean longer), I am sorry to say. All things considered, I'm inclined to think that the Aeroclub Gauntlet was used as base for the AZ master. Even though it was for sure quite thoroughly redesigned. The good fit of the main parts between Aeroclub and AZ is rather suspicious, though it will make the kitbash definitely easier. Today, I used the opportunity, and while taking photos for my Armstrong Whitworth Atlas RFI thread, I took some farewell pictures of the old Gauntlet before disassembly. Edited July 6, 2022 by Patrik 6 2 Link to comment Share on other sites More sharing options...
Courageous Posted July 8, 2022 Share Posted July 8, 2022 A nice thought process to get what you want. I do like Aeroclub wings for their ribbing, nice. Looking forward to your build. Stuart 1 Link to comment Share on other sites More sharing options...
Patrik Posted July 10, 2022 Author Share Posted July 10, 2022 Last week, my modelling was slightly hampered by imported Portuguese Covid. Nevertheless, I started the modifications for mating the AZ fuselage and Aeroclub wing. Hard work done, fine-tuning must wait until I close the fuselage. However, the fit is quite fine already now. Time to start playing with the interior. 8 Link to comment Share on other sites More sharing options...
Patrik Posted July 16, 2022 Author Share Posted July 16, 2022 (edited) Interior more or less ready to be painted. Used the original AZ parts, somewhat improved, and added few more from scratch. The bulkhead should represent the fuel tank. People keep warning me about the AZ Gauntlet. Sometimes I can see why, because e.g. fitting the PE instrument panels in the fuselage and the related modifications (more precisely the related ordeal) could mean a deal breaker for someone less hardened by two decades of fighting shortruns as I am. Edited July 16, 2022 by Patrik 8 Link to comment Share on other sites More sharing options...
AdrianMF Posted July 16, 2022 Share Posted July 16, 2022 27 minutes ago, Patrik said: People keep warning me about the AZ Gauntlet. Always reassuring when you have got one in the stash… I will be paying even closer attention now! Lovely work going on. Regards, Adrian 4 Link to comment Share on other sites More sharing options...
Patrik Posted July 23, 2022 Author Share Posted July 23, 2022 (edited) Too busy working week, managed just opening the slots for the Aeroclub fin and stabilizers. Warning for the potential pure AZ Gauntlet builders, like @AdrianMF. AZ stabilizers are butt joint and their position is pre-scribed on the fuselage. I do not comment on the variation in datum on both sides, however AZ also leads you to believe in rather extravagant incidence angles of the stabilizers - see red lines below. Edited July 23, 2022 by Patrik 3 2 Link to comment Share on other sites More sharing options...
Courageous Posted July 24, 2022 Share Posted July 24, 2022 On 7/23/2022 at 9:07 PM, Patrik said: leads you to believe in rather extravagant incidence angles of the stabilizers Would've fooled me. Stuart Link to comment Share on other sites More sharing options...
Patrik Posted August 4, 2022 Author Share Posted August 4, 2022 Between vacation and vacation managed completing the interior. However, after closing the fuselage, you won't see much more than the seat. 7 Link to comment Share on other sites More sharing options...
Courageous Posted August 7, 2022 Share Posted August 7, 2022 Looks nice and bright in the cockpit, might see more than you think. Stuart Link to comment Share on other sites More sharing options...
johnhab Posted August 9, 2022 Share Posted August 9, 2022 Dobre den Patrik, That is some cool and clean workmanship! Re cockpit colours what is the light colour in your cockpit area? Thanks in advance John Link to comment Share on other sites More sharing options...
Patrik Posted August 10, 2022 Author Share Posted August 10, 2022 Humbrol 166, which looks just right to me for the purpose. However, at least the one I have must be used carefully, takes more than 24 hours to dry properly. Link to comment Share on other sites More sharing options...
johnhab Posted August 10, 2022 Share Posted August 10, 2022 Diki, John Link to comment Share on other sites More sharing options...
Patrik Posted August 27, 2022 Author Share Posted August 27, 2022 Summer activities are not good for modelling. Nevertheless, I am through the most critical part of the build - mating the AZ fuselage with Aeroclub wing and empennage - and I started adding some of the missing details. On the picture below, fin and rudder were dry fitted for PR purposes only. I also corrected the (one) panel line, that AZ for some reason failed copying from Aeroclub correctly. Probably they knew better😀. Next, I am going turn my attention to the undercarriage. The positions of the rear undercarriage struts were indicated wrongly on the Aeroclub wing, they should be in line with the rear wing spar, not in the middle of the wing, see above. By the way, AZ has it identically wrong, one more hint proving the ancestry. Below the undercarriage legs. Aeroclub too long, AZ too short. Shortening is easier than extending, choosing Aeroclub. 5 Link to comment Share on other sites More sharing options...
Patrik Posted August 28, 2022 Author Share Posted August 28, 2022 Undercarriage in half-time. 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now