Sturmovik Posted June 11, 2022 Share Posted June 11, 2022 (edited) I was actually saving for the Tamiya P-47 in order to test my new Mr. Mark Softer on their decals, but this one showed up cheaply from a known Facebook seller. The seller warned me before paying him, that the kit was unbagged and with the decal sheet cut in half (but in top shape). Hopefully everything will be there. For now, I'll be posting photos of the boxart from the Internet, a single photo of the IRL aircraft, and some profiles of similar aircraft. Here you can see 431 after the War. It had the yellow ID markings on the tail. As other Daggers had yellow ID bands on the wings, and this one doesn't show the upper surfaces, it's safe to assume 431 also had the yellow bands on the upper surfaces of the wings. A profile from the Mirage IIIEA/Dagger from Kinetic. I'll guide myself with their instructions for the yellow bands. C-437, with the same yellow configuration on the tail and yellow bands. Here you can see 431's brother, 432. It was exhibited in the Museo Nacional de Aeronáutica in Buenos Aires. As of 2022, it's been removed from the hangar to undergo restoration works. Also, a profile from Dagger C-430 with turquoise bands. And finally, the boxart (taken from the Internet): I also have posted a wip thread for Tamiya's Fw 190D-9 in 1:48. I don't know which one to build when my holidays arrive. Edited July 7, 2022 by Sturmovik 4 Link to comment Share on other sites More sharing options...
Sturmovik Posted June 30, 2022 Author Share Posted June 30, 2022 Hello guys! In between my exams, I was able to do some work on Italeri's Dagger. I followed Pablo Calcaterra's suggestion on his Dagger on Modelling Madness, and added two wedges under the upper wing halves. I then dry fitted the wings to the taped fuselage (I still need to start work on the kit proper). No steps to be seen, but a gap. Will see if I fill it, or I get lazy and do nothing about it. 5 Link to comment Share on other sites More sharing options...
Jure Miljevic Posted June 30, 2022 Share Posted June 30, 2022 Hello, Sturmovik Interesting subject of your build. Also, these originally ESCI kits are not of a shake and bake variety. Decades ago I built two of their Mirages III and Kfir C-2 kit and especially the latter was a bit handful. Nevertheles they can all be build into a nice models. Cheers Jure 1 Link to comment Share on other sites More sharing options...
Sturmovik Posted June 30, 2022 Author Share Posted June 30, 2022 9 hours ago, Jure Miljevic said: are not of a shake I know I know. But, this kit was on the cheap side (it had been opened, and the decal sheet had been cut in half), so I HAD to buy it. I maybe should have saved my money to get the 1:32 Italeri Mirage IIIE. No point in looking back though. Link to comment Share on other sites More sharing options...
exdraken Posted June 30, 2022 Share Posted June 30, 2022 Great project! I recommend a Neomega resin cockpit and AML resin or Reskit nozzles if you want to improve the base kit! 1 Link to comment Share on other sites More sharing options...
Sturmovik Posted June 30, 2022 Author Share Posted June 30, 2022 17 minutes ago, exdraken said: Great project! I recommend a Neomega resin cockpit and AML resin or Reskit nozzles if you want to improve the base kit! Not wanting to sound cheap or lazy, but I don't think adding resin to a model that will later be put on a shelf would matter. Besides, I'd have to order the resin from abroad, and that would be very expensive (U$D is at 230ARS or more). Funnily enough, kits bought from Japan are half the price of what's being sold on my nearby hobby shops (including shipping). There's also the issue with importing things. We're basically not allowed to import stuff. 1 1 Link to comment Share on other sites More sharing options...
exdraken Posted June 30, 2022 Share Posted June 30, 2022 3 minutes ago, Sturmovik said: There's also the issue with importing things. We're basically not allowed to import stuff. That might indeed be an issue! wonder what could be done about it. 1 Link to comment Share on other sites More sharing options...
Sturmovik Posted June 30, 2022 Author Share Posted June 30, 2022 1 hour ago, exdraken said: That might indeed be an issue! wonder what could be done about it. Not much except to wait for a government change. Link to comment Share on other sites More sharing options...
Sturmovik Posted July 3, 2022 Author Share Posted July 3, 2022 Not much modelling these days. Exams are approaching, with two finals scheduled for the end of July. I also did one yesterday, and I'm awaiting the mark of one exam I had to redo because I was shy of 1 point from passing. But I did paint the cockpit, built up the seat and added some weight to the Dagger. Photos soon if I stop from being lazy. Anyways, back to something more entertaining. While taking a look at several book boxes I had closed at home, I stumbled upon these two magazines. From 2011! Meaning I was 15 when I bought them. 1 Link to comment Share on other sites More sharing options...
Sturmovik Posted July 4, 2022 Author Share Posted July 4, 2022 Painted the sidewalls light grey and several other parts in black, such as the nosecone, exhaust and parts of the cockpit. Instrument panel details were privided as decals. I put some effort and painted the seat withb black seatbelts and olive drab cushion. Now, we're making the mother of all omelettes guys, we can't fret over every egg! 2 Link to comment Share on other sites More sharing options...
Sturmovik Posted July 5, 2022 Author Share Posted July 5, 2022 (edited) The Dagger has been assembled. I won't glue the nose cone until the aircraft has been decalled and it's on its gear. Edited July 5, 2022 by Sturmovik 1 Link to comment Share on other sites More sharing options...
Sturmovik Posted July 5, 2022 Author Share Posted July 5, 2022 The yellow bands have been painted. The underside yellow bands were masked and the light grey was applied. 1 Link to comment Share on other sites More sharing options...
Sturmovik Posted July 6, 2022 Author Share Posted July 6, 2022 Hello guys, I have applied the main colours for the camouflage. I used RLM colours for it (RLM 70/71/79). One thing I should have done before painting the yellow bands was to prime the area. It took multiple coats of yellow to get opacity. I'll let the paint fully cure before glossing the model and apply the decals. Link to comment Share on other sites More sharing options...
Sturmovik Posted July 7, 2022 Author Share Posted July 7, 2022 Decals were added after two coats of gloss varnish. Once they were dry after letting them cure overnight, I glued the final parts (landing gear, wheels, gear doors, nose and fuel tanks). I'm calling this build complete. RFI photos later today. I'm now eyeing Italeri's 1:32 Mirage IIIE. I have the empennage extension (asked about it here las week). If I buy it, it'll be I-003 in the light blue/light grey low visibility scheme. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now