tonyot Posted March 6, 2022 Share Posted March 6, 2022 (edited) Hiya Folks, I bought this last Saturday and started it that night,..... I wasn`t going to do it as a WIP but as I`d taken a few pic for a friend, I thought I`d stick them on here and sort of run with it!! I was originally going to build it on its undercarriage as a 19 or 92 Sqn aircraft based in Germany,...... But then I changed my mind,.... I`ll do a RAF Germany Phantom some other time,...... because I have always liked this shark mouthed aircraft from 41 Sqn and I have decals for it on an old ED Models Almark decal sheet; So,.....here is the cockpit; Before long it was coming together quickly; I was toying with the idea of depicting the model with its unercarriage being raised as it took off,...... but after checking out the dropped flaps and slapts required,.... and the extended oleo`s,.... I decided to close the undercarriage bays and have it going fast and low at full chat,...... but I don`t think the kit was meant to be built like this with the gear doors closed nd the canopy closed,..... as the fit of these parts was awful!..... So,.... after a lot of whittling and filling,..... here it is with the canopy closed; And a close up of the crew,..... probably not the best,.... but it will do for me; After a wash,.... I then started to paint it,.... here it is after the first brushed on coat of Aeromaster Drk Sea Grey,..... my last bottle! So that is where I`m at so far,..... I also bought a 1/72nd Italeri Hudson last Saturday too and that is ready to paint now,...... again, not the easiest kit in the world to build! Cheers for now, Tony Edited March 6, 2022 by tonyot 18 Link to comment Share on other sites More sharing options...
bigbadbadge Posted March 6, 2022 Share Posted March 6, 2022 Blimey That was quick Tony , Phantom is looking good fella and a Hudson too, crikey. Chris 1 Link to comment Share on other sites More sharing options...
Steve Coombs Posted March 6, 2022 Share Posted March 6, 2022 Swift work there! Are you going to replicate the 43 Sqn zap on the starboard splitter plate? 1 Link to comment Share on other sites More sharing options...
Anthony in NZ Posted March 6, 2022 Share Posted March 6, 2022 Wow, nice one Tony...that was quick! Love your choice of scheme too, very nice! Another masterpiece in the making, love the 'in flight' idea Link to comment Share on other sites More sharing options...
tonyot Posted March 6, 2022 Author Share Posted March 6, 2022 2 hours ago, bigbadbadge said: Blimey That was quick Tony , Phantom is looking good fella and a Hudson too, crikey. Chris Thanks Chris,.... I haven`t been hammering it either,...... just plodding along. The Hudson has gone together better than any I`ve previously done,..... it is still pig,.... but I`ve been luckier with this one, maybe because I have a few under my belt now? I was lucky to find it amongst th 2nd hand kits, just have to decide which scheme I want now? ASV and rockets with the White Coastal scheme was my original idea,...... but I`ve noticed that Special Hobby are releasing a new tooling, so might save tht scheme for that kit? 2 hours ago, Steve Coombs said: Swift work there! Are you going to replicate the 43 Sqn zap on the starboard splitter plate? Thanks mate,..... yes I`m hoping to replicate that zap,..... it would be rude not to! 2 Link to comment Share on other sites More sharing options...
tonyot Posted March 6, 2022 Author Share Posted March 6, 2022 5 minutes ago, Anthony in NZ said: Wow, nice one Tony...that was quick! Love your choice of scheme too, very nice! Another masterpiece in the making, love the 'in flight' idea Thanks Anthony,..... I don`t know about masterpiece,..... but hopefully it will look OK? 1 Link to comment Share on other sites More sharing options...
Steve Coombs Posted March 6, 2022 Share Posted March 6, 2022 1 minute ago, tonyot said: Thanks mate,..... yes I`m hoping to replicate that zap,..... it would be rude not to! You know it makes sense! 2 Link to comment Share on other sites More sharing options...
bigbadbadge Posted March 6, 2022 Share Posted March 6, 2022 29 minutes ago, tonyot said: Thanks Chris,.... I haven`t been hammering it either,...... just plodding along. The Hudson has gone together better than any I`ve previously done,..... it is still pig,.... but I`ve been luckier with this one, maybe because I have a few under my belt now? I was lucky to find it amongst th 2nd hand kits, just have to decide which scheme I want now? ASV and rockets with the White Coastal scheme was my original idea,...... but I`ve noticed that Special Hobby are releasing a new tooling, so might save tht scheme for that kit? Good to hear the Hudson went together okay too, I remember doing that one too. I do have an MPM Mk.I/II in the stash too. One day maybe. Chris 1 Link to comment Share on other sites More sharing options...
tonyot Posted March 8, 2022 Author Share Posted March 8, 2022 After the Dark Sea Grey,..... here is the Humbrol acrylic Drk Green going on; Some of the decals are a bit wrong,..... so I might have to modify them,....... and although the Almark instructions do mention the zaps from 43 and 84 Sqn`s,...... they re not included on the sheet! Cheers for now, Tony 10 Link to comment Share on other sites More sharing options...
bigbadbadge Posted March 8, 2022 Share Posted March 8, 2022 Looking great with the dark green on Tony, great job. Good luck with the decals too. Chris 1 Link to comment Share on other sites More sharing options...
tonyot Posted March 9, 2022 Author Share Posted March 9, 2022 On 3/8/2022 at 6:47 PM, bigbadbadge said: Looking great with the dark green on Tony, great job. Good luck with the decals too. Chris Thanks Chris,.... quite a way to go until the decals! 1 Link to comment Share on other sites More sharing options...
tonyot Posted March 13, 2022 Author Share Posted March 13, 2022 Got a bit more done with the addition of the Light Aircraft Grey undersides and the white pylons ,...... I`ve also done the silver areas around the jet pipes, which still needs some work to vary the panels,..... plus I tidied up the camouflage demarcations,..... I`ve not done a camouflage for a while and you soon get out of practice!....... I also have a 72nd scale SH Blenheim Mk.V on the go too which was being paintd alongside the Phantom; So the next job is the black radome and I`ll have a go to see how Medium Sea Grey looks for the camouflage section on the tip of the fin,..... if it is too light, then Ocean Grey might do it? Cheers for now, Tony 8 Link to comment Share on other sites More sharing options...
bigbadbadge Posted March 13, 2022 Share Posted March 13, 2022 Great to see E more progress on this Tony, looks good and a Blenheim too, that looks great as well, nice to see a Mk.V. Cracking work Chris 1 Link to comment Share on other sites More sharing options...
(ex)Sgtrafman Posted March 13, 2022 Share Posted March 13, 2022 I always love your work Tony and this is no exception. Looking forward to seeing it with stickers on 👍 All the best Iain 1 Link to comment Share on other sites More sharing options...
heloman1 Posted March 13, 2022 Share Posted March 13, 2022 Super sonic hey mate! You have certainly cracked on with this one. Who couldn't like a sharks mouth scheme and wheels up will look good? Are the Aeromaster paints out of productions now? The Humbrol acrylic seems to have brushed on quite nicely. Colin 1 Link to comment Share on other sites More sharing options...
tonyot Posted March 13, 2022 Author Share Posted March 13, 2022 7 hours ago, bigbadbadge said: Great to see E more progress on this Tony, looks good and a Blenheim too, that looks great as well, nice to see a Mk.V. Cracking work Chris Cheers Chris,..... yeah I have a soft spot for the Blenheim Mk.V,... it is going to be wearing early SEAC markings. 6 hours ago, (ex)Sgtrafman said: I always love your work Tony and this is no exception. Looking forward to seeing it with stickers on 👍 All the best Iain Thanks Iain,.... very kind,...hope you are keeping well mate? 6 hours ago, heloman1 said: Super sonic hey mate! You have certainly cracked on with this one. Who couldn't like a sharks mouth scheme and wheels up will look good? Are the Aeromaster paints out of productions now? The Humbrol acrylic seems to have brushed on quite nicely. Colin Cheers Colin,.... yeah the Aeromaster paints are well out of production,..... I bought a shed load before they vanished for good, but I`m running out now. Yes the new Humbrol acryics brush on very well. 1 Link to comment Share on other sites More sharing options...
Biggles87 Posted March 13, 2022 Share Posted March 13, 2022 Wow! I've only just found this and you've nearly finished. I suppose it's a testament to the kit engineering ( and your skill ) that you've been able to progress so quickly; . John 1 Link to comment Share on other sites More sharing options...
tonyot Posted March 14, 2022 Author Share Posted March 14, 2022 On 3/13/2022 at 3:54 PM, Biggles87 said: Wow! I've only just found this and you've nearly finished. I suppose it's a testament to the kit engineering ( and your skill ) that you've been able to progress so quickly; . John Thanks John,...... definitely the kit,... although it is`t as good as I remember it being! Link to comment Share on other sites More sharing options...
tonyot Posted March 14, 2022 Author Share Posted March 14, 2022 A bit more done,..... got the black radome painted, gloss varnish on ready for the decals and the bare metal areas around the jet pipes painted too; Cheers for now, Tony 3 Link to comment Share on other sites More sharing options...
stevehnz Posted March 14, 2022 Share Posted March 14, 2022 Hi Tony, only just spotted this, must have been the 1/48 fuzzed out my radar. It's a big beast against the Blenheim, a good looking big beast too. I want to do the 111 sqn machine I saw at Biggin Hill in 1983 in this same basic scheme, it really is a good looker as you showing really well. Steve. 1 Link to comment Share on other sites More sharing options...
tonyot Posted March 14, 2022 Author Share Posted March 14, 2022 34 minutes ago, stevehnz said: Hi Tony, only just spotted this, must have been the 1/48 fuzzed out my radar. It's a big beast against the Blenheim, a good looking big beast too. I want to do the 111 sqn machine I saw at Biggin Hill in 1983 in this same basic scheme, it really is a good looker as you showing really well. Steve. Thanks Steve,..... I do like the Phantom in the grey/ green scheme and a 111 Sqn one will be a looker for sure. I`d like to build them all but I`m running out of room! 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now