Popular Post bigbadbadge Posted January 9, 2022 Popular Post Share Posted January 9, 2022 Hi all In the latter part of last year I asked a question in tge Cold War section of the forum re the above aircraft and was very pleased with the results, I have always wanted to model one of these but been wary of all of the differences etc and could not find too much on t'internet etc, so was very thankful to @72modeler @mick b @Our Ned @Junchan @Seahawk @Harry Lime @Troy Smith and a special thanks to @71chally. Thanks guys you helped turn something I was scared I would not be able to do justice to, into a very enjoyable project. So armed with the info I needed I started the build. Thank you also to those who have supported and encouraged me on my build too. I really appreciate it. This is the Sword 1/72 Skyraider AEW kit and it is a really nice kit, it's a short run kit bit the fit is really nice. The Aircraft modelled is WV106 which was attached to HMS Centaur during the first 6 months of 1959, as part of 849 Squadron D flight. My Dad was aboard Centaur during this time and loved the look of these and would often mention them , hence why I wanted to build one really. I was fortunate enough to locate a Model decal sheet which contained the WV106/427 option so was able to complete. Some extras have been added to tge model such as Radome support braces, static Discharge Wicks, tail aerial from stretch plastic cotton bud tube over some .33mm brass rod, the underwing aerials are bristles from SWMBO's toothbrush , just checking she's not looking over my shoulder!!! Otherwise the rest is included with the kit. The model is brushpainted with Colourcoats and Humbrol enamels and chipping with a pencil and staining from tge exhaust is with powders. Anyway enough waffle from me here's some photos. Build thread is here part of a multiple build thread I apologise for the photos I even waited until it was sunny this morning to take them but they still came out this way. I hope you enjoyed them I certainly enjoyed this model. Thanks for looking in Chris 75 Link to comment Share on other sites More sharing options...
Harry Lime Posted January 9, 2022 Share Posted January 9, 2022 Chris, You've turned out a real cracker there, superb model! Mark. 1 Link to comment Share on other sites More sharing options...
72modeler Posted January 9, 2022 Share Posted January 9, 2022 Yessir- the AEW wasn't the prettiest Spad, but you have a beautiful model there, Chris! Mike 1 Link to comment Share on other sites More sharing options...
Andy J Posted January 9, 2022 Share Posted January 9, 2022 Yet another display of your sublime brush painting skills fantastic work Chris another beautiful creation for your collection 👏 🙂👍 1 Link to comment Share on other sites More sharing options...
mick b Posted January 9, 2022 Share Posted January 9, 2022 Superb Chris, you’ve done the beast justice. Mike 1 Link to comment Share on other sites More sharing options...
Learstang Posted January 9, 2022 Share Posted January 9, 2022 (edited) Lovely work on that British Spad! I have to say the Skyraider looks good with the British roundels, but then I've found most American aircraft look good with British markings. I have this kit myself, one which I'm building as an Operation Musketeer aircraft (Suez), and the other I'm going to do as an American Korean War aircraft. I'm glad to hear the kit goes together well. I've always thought it a bit odd that the British had this superb carrier-borne attack aircraft, but instead of using it for its normal purpose (instead of the problematic Wyvern), they used it just for AEW work. Well, I suppose Westland needed the work! Best Regards, Jason Edited January 9, 2022 by Learstang Additional comments added. 1 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted January 9, 2022 Author Share Posted January 9, 2022 1 hour ago, Harry Lime said: Chris, You've turned out a real cracker there, superb model! Mark. Thanks Mark very kind of you, it's a cracking kit. 45 minutes ago, 72modeler said: Yessir- the AEW wasn't the prettiest Spad, but you have a beautiful model there, Chris! Mike Thanks Mike very kind fella, there's a look about them with those large Radomes , all looked unusual, Avenger, Gannets, but they do certainly make great subjects to model. 46 minutes ago, Andy J said: Yet another display of your sublime brush painting skills fantastic work Chris another beautiful creation for your collection 👏 🙂👍 Thanks Andy, very pleased with the way it turned out and pleased I don't have to build a Messerschmitt, phew!!! 47 minutes ago, mick b said: Superb Chris, you’ve done the beast justice. Mike Thanks Mike, very kind of you. I am very pleased with it . 17 minutes ago, Learstang said: Lovely work on that British Spad! I have to say the Skyraider looks good with the British roundels, but then I've found most American aircraft look good with British markings. I have this kit myself, one which I'm building as an Operation Musketeer aircraft (Suez), and the other I'm going to do as an American Korean War aircraft. I'm glad to hear the kit goes together well. I've always thought it a bit odd that the British had this superb carrier-borne attack aircraft, but instead of using it for its normal purpose (instead of the problematic Wyvern), they used it just for AEW work. Well, I suppose Westland needed the work! Best Regards, Jason Thanks Jason, you certainly will enjoy the kits the instructions do give you the wrong wing to mount the Pitot on , just a small heads up there. I am doing a Lightning 1 (P322) and have a P39 to do with Roundels too. The Lightning is almost ready for paint. Thanks guys for your generous comments Chris 4 Link to comment Share on other sites More sharing options...
mick Posted January 9, 2022 Share Posted January 9, 2022 great work 1 Link to comment Share on other sites More sharing options...
71chally Posted January 9, 2022 Share Posted January 9, 2022 Superb work Chris, lovely detail and finish, including the subtle exhaust staining. Beautiful result! 1 Link to comment Share on other sites More sharing options...
Bill Bunting Posted January 9, 2022 Share Posted January 9, 2022 Very nice! I have that kit in the stash, it will be Canadian, however I will refer to your WIP for hints. Thanks for sharing! 1 Link to comment Share on other sites More sharing options...
Learstang Posted January 9, 2022 Share Posted January 9, 2022 10 minutes ago, Bill Bunting said: Very nice! I have that kit in the stash, it will be Canadian, however I will refer to your WIP for hints. Thanks for sharing! I didn't realise the Canadians used the Skyraider AEW.1 also. That will be a beauty, for sure! Best Regards, Jason 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted January 9, 2022 Author Share Posted January 9, 2022 1 hour ago, mick said: great work Thanks Mick 1 hour ago, 71chally said: Superb work Chris, lovely detail and finish, including the subtle exhaust staining. Beautiful result! Thanks James, that's very kind, glad you like it and thank you so much for your help, I really do appreciate it. 1 hour ago, Bill Bunting said: Very nice! I have that kit in the stash, it will be Canadian, however I will refer to your WIP for hints. Thanks for sharing! Not seen a Canadian one during my searches, don't forget they tell you to put the Pitot on the wrong wing. Looking forward to seeing a Canadian one too. Thanks for your kind comments, there is another build on here too By Slywolf and that's very worthy of a visit too. 1 hour ago, Learstang said: I didn't realise the Canadians used the Skyraider AEW.1 also. That will be a beauty, for sure! Best Regards, Jason Oooooo yes really looking forward to seeing that too. I meant to mention the Pitot in my reply earlier too, that's really one of the very few criticisms of the kit really they instruct the wrong wing. Otherwise the kit is great and can recommend. Thanks guys for the kind comments Chris 2 Link to comment Share on other sites More sharing options...
Lord Riot Posted January 9, 2022 Share Posted January 9, 2022 Very nice indeed! 1 Link to comment Share on other sites More sharing options...
AliGauld Posted January 9, 2022 Share Posted January 9, 2022 Chris you've produced another absolute cracker. She certainly looks gorgeous with roundels on. Cheers, Alistair 1 Link to comment Share on other sites More sharing options...
Bill Bunting Posted January 9, 2022 Share Posted January 9, 2022 2 hours ago, bigbadbadge said: Not seen a Canadian one during my searches, don't forget they tell you to put the Pitot on the wrong wing. Looking forward to seeing a Canadian one too. . Thanks guys for the kind comments Chris I'm such an IDIOT! I have an Avenger/Tarpon on the shelf. They did serve in the RCN. No Skyraiders. Now to hang my head in shame.. .😔 2 Link to comment Share on other sites More sharing options...
RMCS Posted January 9, 2022 Share Posted January 9, 2022 Lovely work 1 Link to comment Share on other sites More sharing options...
Terry1954 Posted January 9, 2022 Share Posted January 9, 2022 Came out a real treat Chris. Still can't quite get over the tremendous finish you obtain from brush painting! Terry 1 Link to comment Share on other sites More sharing options...
stevej60 Posted January 9, 2022 Share Posted January 9, 2022 that's a cracking build Chris,love the Skyraider especially these AEW versions. 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted January 9, 2022 Author Share Posted January 9, 2022 2 hours ago, Lord Riot said: Very nice indeed! Thank you very much Lord Riot. 2 hours ago, AliGauld said: Chris you've produced another absolute cracker. She certainly looks gorgeous with roundels on. Cheers, Alistair Thanks Alistair , looks great with the Roundels, very kind fella and thanks for your support and encouragement, I do appreciate it. 55 minutes ago, Bill Bunting said: I'm such an IDIOT! I have an Avenger/Tarpon on the shelf. They did serve in the RCN. No Skyraiders. Now to hang my head in shame.. .😔 Bill don't worry fella, happens to us all, I have made some great fauxpas myself, the Avenger will look splendid. 44 minutes ago, RMCS said: Lovely work Thanks RMCS 34 minutes ago, Terry1954 said: Came out a real treat Chris. Still can't quite get over the tremendous finish you obtain from brush painting! Terry Thanks Terry, very kind of you to say, I am really chuffed with this one. Thanks for your support and encouragement too fella. 2 minutes ago, stevej60 said: that's a cracking build Chris,love the Skyraider especially these AEW versions. Thanks Steve, they are impressive Aircraft. The kit is really nice and goes together well. Thanks guys for your comments Chris 1 1 Link to comment Share on other sites More sharing options...
keefr22 Posted January 9, 2022 Share Posted January 9, 2022 Another glorious model off your bench Chris, and I'm still astounded you can get paintjobs like that with a brush!! Stunning modelling again! Keith 1 Link to comment Share on other sites More sharing options...
djos Posted January 9, 2022 Share Posted January 9, 2022 Very sharp build, looking great regards Djordje 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted January 9, 2022 Author Share Posted January 9, 2022 23 minutes ago, keefr22 said: Another glorious model off your bench Chris, and I'm still astounded you can get paintjobs like that with a brush!! Stunning modelling again! Keith Thanks Keith, really kind of you fella, you will definitely enjoy this one. Very pleased with the way it turned out. 23 minutes ago, djos said: Very sharp build, looking great regards Djordje Thanks Djordje, very kind. Thanks guys Chris 1 Link to comment Share on other sites More sharing options...
cardiff guy Posted January 9, 2022 Share Posted January 9, 2022 Nice finish, hope mine turns out as well. 1 Link to comment Share on other sites More sharing options...
Dunny Posted January 10, 2022 Share Posted January 10, 2022 Lovely build and finish Chris - I hope it met with Dad's approval? Cheers, Roger 1 Link to comment Share on other sites More sharing options...
Wulfman Posted January 10, 2022 Share Posted January 10, 2022 9 hours ago, Learstang said: Lovely work on that British Spad! I have to say the Skyraider looks good with the British roundels, but then I've found most American aircraft look good with British markings. I have this kit myself, one which I'm building as an Operation Musketeer aircraft (Suez), and the other I'm going to do as an American Korean War aircraft. I'm glad to hear the kit goes together well. I've always thought it a bit odd that the British had this superb carrier-borne attack aircraft, but instead of using it for its normal purpose (instead of the problematic Wyvern), they used it just for AEW work. Well, I suppose Westland needed the work! Best Regards, Jason I agree, Westland should have built the Spad under licence, maybe they could have called it the Westland Wyoming . Wulfman 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now