Hamden Posted September 14, 2022 Share Posted September 14, 2022 More great workmanship and attention to detail Olivier. For your stand wheel problem would it not be possible to resin cast some using the Tamiya one's as masters for the mould? Stay safe Roger 1 Link to comment Share on other sites More sharing options...
Totally Mad Olivier Posted September 14, 2022 Author Share Posted September 14, 2022 12 minutes ago, Hamden said: would it not be possible to resin cast some using the Tamiya one's as masters for the mould? Thanks Roger! Maybe it is possible, but I don't know how to proceed, especially since they are clear parts... I have time to think about this problem, since the 2nd bike is yet to build. Cheers, O 1 Link to comment Share on other sites More sharing options...
gamblor916 Posted September 15, 2022 Share Posted September 15, 2022 Casting is an easy way to copy it. You can get clear epoxy resin. This is the silicone I use and clear epoxy resin. I'm sure you can find something similar where you live. Resin casting is a skill that's really handy for model building. I would cut and mould everything inside the box. 1 Link to comment Share on other sites More sharing options...
Totally Mad Olivier Posted September 16, 2022 Author Share Posted September 16, 2022 Thanks a lot gamblor for this suggestion. It is good to know such a clear epoxy resin exist, and maybe I will order some. But now that my front racing stand is built and painted, it appears that it doesn't give the bike more stability. That is why I will probably represent only one front stand, while there will be of course 2 rear ones. Even if I still have a little time to spend on this bike (piping and front fender), I couldn't stand removing it of its straightjacket (the so useful Marco Model jig) and to present it for the first time with both racing stands: To show the beast with its cowls, I chose to change the cardboard for a Grey one (Meng cutting mat), more suitable with a G.P paddock: Now a word about the mechanic I'm supposed to represent. I got a few weeks ago the Kitano head that is really great. Pity, Ron was right, the Tamiya body is oversized and the head is too small for such a body. I began to decrease (quite a lot) the neck but it is the whole body that will require a significant reduction, what will not be so simple (probably easier though than when I turned Sir Lawrence of Arabia piggybacking on his bike into Pietro Bordino sitting in his Fiat 806, see the thread dedicated to this build). Cheers, O Edit a bit later: I also had the idea to show the bike with a driver on it. Of course, as you know, the driver will jump the 2nd bike (yet to build...) that will have all cowls assembled, and the combination, boots and helmet are not at all the colors of Honda Repsol. It will be another challenge to change Valentino Rossi with Ducati colors into Marc Marquez with Honda ones, but it is though interesting to see that, except hands that can't hold the handlbars for now, the position of the driver (who is correctly sized, him) is really convincing imho: 6 Link to comment Share on other sites More sharing options...
Jochen Barett Posted September 16, 2022 Share Posted September 16, 2022 3 hours ago, Totally Mad Olivier said: +++ Now a word about the mechanic I'm supposed to represent. I got a few weeks ago the Kitano head that is really great. Pity, Ron was right, the Tamiya body is oversized and the head is too small for such a body. I began to decrease (quite a lot) the neck but it is the whole body that will require a significant reduction, what will not be so simple (probably easier though than when I turned Sir Lawrence of Arabia piggybacking on his bike into Pietro Bordino sitting in his Fiat 806, see the thread dedicated to this build). +++ I already see you buying a 3D laser scanner, scanning the mechanic, reducing the 3D computer model in size, and 3D print or CNC mill a new smaller mechanic. We all are looking forward! (Those hands ARE big!) 2 Link to comment Share on other sites More sharing options...
IanC Posted September 17, 2022 Share Posted September 17, 2022 11 hours ago, Totally Mad Olivier said: Thanks a lot gamblor for this suggestion. It is good to know such a clear epoxy resin exist, and maybe I will order some. But now that my front racing stand is built and painted, it appears that it doesn't give the bike more stability. That is why I will probably represent only one front stand, while there will be of course 2 rear ones. Even if I still have a little time to spend on this bike (piping and front fender), I couldn't stand removing it of its straightjacket (the so useful Marco Model jig) and to present it for the first time with both racing stands: To show the beast with its cowls, I chose to change the cardboard for a Grey one (Meng cutting mat), more suitable with a G.P paddock: Now a word about the mechanic I'm supposed to represent. I got a few weeks ago the Kitano head that is really great. Pity, Ron was right, the Tamiya body is oversized and the head is too small for such a body. I began to decrease (quite a lot) the neck but it is the whole body that will require a significant reduction, what will not be so simple (probably easier though than when I turned Sir Lawrence of Arabia piggybacking on his bike into Pietro Bordino sitting in his Fiat 806, see the thread dedicated to this build). Cheers, O Edit a bit later: I also had the idea to show the bike with a driver on it. Of course, as you know, the driver will jump the 2nd bike (yet to build...) that will have all cowls assembled, and the combination, boots and helmet are not at all the colors of Honda Repsol. It will be another challenge to change Valentino Rossi with Ducati colors into Marc Marquez with Honda ones, but it is though interesting to see that, except hands that can't hold the handlbars for now, the position of the driver (who is correctly sized, him) is really convincing imho: Absolutely incredible work! 1 Link to comment Share on other sites More sharing options...
Totally Mad Olivier Posted September 18, 2022 Author Share Posted September 18, 2022 Hello my friends, I brought the last necessary corrections to my build and the latter is now finished. I invite you to see the last pics in the RFI section below: Thanks a lot to all for watching, encouraging and helping! Cheers, O 2 Link to comment Share on other sites More sharing options...
pg265 Posted October 2, 2022 Share Posted October 2, 2022 Hi, Wow!! Just Wow!! Stunning build and details with lots of explanation. Bravo! Pascal 1 Link to comment Share on other sites More sharing options...
Totally Mad Olivier Posted January 1, 2023 Author Share Posted January 1, 2023 Hello to all, I wish to all of you a happy 2023 year! Peace, health, human rights preserved everywhere (we can dream...), and many good moments with your family and your favorite hobby!! My 2nd bike is going on, and should be over soon (maybe end of January). The experience of the first build, the bit less level of detail added to not posting my progress allowed me to go faster. Here are below some pics giving an idea of what is ever done and what is yet to do: Cheers, Olivier 6 Link to comment Share on other sites More sharing options...
JeroenS Posted January 2, 2023 Share Posted January 2, 2023 Happy New Year Olivier, and may your dreams come true... that would be nice, wouldn't it? The Marquez bike looks to be another incredible effort, good luck with finishing it! 1 Link to comment Share on other sites More sharing options...
Hamden Posted January 2, 2023 Share Posted January 2, 2023 Best wishes for the New Year to you and your family Olivier Your second bike is looking superb well up to your exacting standards! Stay safe Roger 1 Link to comment Share on other sites More sharing options...
Totally Mad Olivier Posted January 20, 2023 Author Share Posted January 20, 2023 Hello my friends, My 2nd Honda Repsol bike is now over! You can watch it here: Cheers, Olivier 1 Link to comment Share on other sites More sharing options...
Totally Mad Olivier Posted May 28, 2023 Author Share Posted May 28, 2023 Hello chaps! After a little break (a few weeks), I got back to work my mechanist figure. It is definitely not perfect, but I consider it is acceptable and will bring something more near the Pedrosa bike. I had first to reduce him quite a lot (see below the monster). As it was made from a very old polystyren Tamiya figure, I had to fill the empty insides with resin (Brown Stuff). Then began the long carving to get an acceptable 1/12 figure. It appeared though that the Kitano head I had bought would be too small for this body. I just got his ears back, and grafted them on the Tamiya mechanist head. I also had to modify the right leg, in order my figure to be more stable (I didn't want it to fall on the bike next door!). When I considered the sculpture was acceptable, then the painting job could begin. Used the docs I could get of the Honda GP mechanists in 2014, I painted the outtfit Night Blue. I ordered and glued 2-3 mm flock nylon from Green Stuff World to figure hairs, and then came the decal step. Here too, I used docs and found logos in the Net, that were printed at scale on White custom decal paper. Most of the decals lacking contrast, I had to paint over them, a very delicate job.. Finally, a coat of Marabu satin was applied and here is the result: In situation near the bikes: I am now going to focus on the Marc Marquez figure that will be another challenge… Cheers, Olivier 5 Link to comment Share on other sites More sharing options...
Totally Mad Olivier Posted December 23, 2023 Author Share Posted December 23, 2023 Hello again chaps, I have been silent for a long time, but I was though still working on my Marc Marquez figure project. It has been a long and painstaking job, but it is now very close from being over. For practical reasons, I had decided to work separately on the head (helmet) and on the body. More, the neck was a bit too long and it was anyway necessary to decrease it. I am waiting for the Gravity 2K Gloss total curing, and then the head will be assembled on the body. It will be time to place my figure on the bike, I look forward, and pics will of course be done to show the final result. In the meantime, here are below the links to the short videos I just made and posted in YouTube: All the best to all (hoping you will not have completely forgotten me) and a merry Christmas to all 🥳🎄!! Cheers, Olivier 8 Link to comment Share on other sites More sharing options...
NickD Posted December 23, 2023 Share Posted December 23, 2023 Welcome back and merry Christmas to you too 1 Link to comment Share on other sites More sharing options...
CrazyCrank Posted December 23, 2023 Share Posted December 23, 2023 it was worth waiting for your return, Olivier 1 Link to comment Share on other sites More sharing options...
Totally Mad Olivier Posted December 24, 2023 Author Share Posted December 24, 2023 Hi again, First thanks for your likes and kind comments (Thierry, your Mercedes pics are really great, hats off!! 👍 ). Here are below the first pics I made of my Marquez figure: Next step: Marquez on the beast. This will be for a bit later, since I am in holiday now. The question for me now is: what should be my next project? Come-back to the Mustang? Or build the Porsche 934 Vaillant Tamiya at 1/12 for which I bought an expensive aftermarket detail set? I should be able to see the real car that is exposed at the Brussels car museum (my daughter is living at Brussels and we will spend a few days in the very next days there). All the best, Olivier 9 Link to comment Share on other sites More sharing options...
JeroenS Posted December 24, 2023 Share Posted December 24, 2023 Wow, Marquez is really something else, very cool! Merry Christmas Olivier. What next? I, for one, would really like to see that Mustang back on your bench 🙂 1 Link to comment Share on other sites More sharing options...
Hamden Posted December 24, 2023 Share Posted December 24, 2023 Welcome back Olivier, your Marquez figure is a work of art! As to what's next I agree with Jeroen I to would like to see the Mustang back on the bench Seasons Greetings to you and yours Roger 1 Link to comment Share on other sites More sharing options...
Totally Mad Olivier Posted December 25, 2023 Author Share Posted December 25, 2023 Thanks a lot my friends! My decision is made, I will try first to finish the Indy 500 Pace car Mustang. Cheers, O 2 Link to comment Share on other sites More sharing options...
Pouln Posted December 27, 2023 Share Posted December 27, 2023 Good to see you on the forum again, Olivier. Your biker looks great. Well done. Thanks for your best wishes and the same for you and your loved ones. 1 Link to comment Share on other sites More sharing options...
Pouln Posted December 29, 2023 Share Posted December 29, 2023 On 12/25/2023 at 12:18 PM, Totally Mad Olivier said: Thanks a lot my friends! My decision is made, I will try first to finish the Indy 500 Pace car Mustang. Cheers, O Ohh great. Love to see that one finished (and my guess is that you would like to see it finished too) 1 Link to comment Share on other sites More sharing options...
Totally Mad Olivier Posted January 3 Author Share Posted January 3 Hello my friends, First of all a happy New Year to you all! After little corrections (fe the red portions of the boots were a bit too shiny), here it is finally, my Marquez figure is now in place on his bike: Cheers, Olivier 8 Link to comment Share on other sites More sharing options...
Totally Mad Olivier Posted January 16 Author Share Posted January 16 Hello chaps, I was not totally happy with my previous pics, for 2 reasons: 1) the Marquez figure was not completely finished, as I had not yet assembled the fingers (2 ones at left, 4 ones at right), cut at the beginning of the work. 2) the bikes and figures were placed on the showcase base. Here are the very last pics I made, on a Black cardboard: Now I leave you to go back to my Ford Mustang build, that I am strongly determined to complete. Cheers, O 5 Link to comment Share on other sites More sharing options...
ceeb555 Posted January 19 Share Posted January 19 Oh my gosh - they are stunning Chris 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now