Ade H Posted December 21, 2021 Share Posted December 21, 2021 Long shot, this, I admit. I've tried searching for aftermarket Termignoni exhausts for the Tamiya Ducati Panigale; but I've found nothing other than Hobby Design's very expensive full-fat detail set, which includes them. Anyone with an interest in alternative decal schemes for this bike, like the R Corse in my case, would want these pipes. Even a lot of the Tricolores have them in photos. 1 Link to comment Share on other sites More sharing options...
veg Posted December 21, 2021 Share Posted December 21, 2021 Shouldn’t be too hard to build them and then source aftermarket decals? 1 Link to comment Share on other sites More sharing options...
Stef N. Posted December 21, 2021 Share Posted December 21, 2021 I've got the decals for the Senna version which also needed Termignoni exhauts. Couldn't find the exhausts though. I don't know how it works but would it be possible to get 3D printed ones?? 1 Link to comment Share on other sites More sharing options...
Ade H Posted December 21, 2021 Author Share Posted December 21, 2021 @veg There is no way in which a mere mortal could scratch satisfactory replicas from styrene. They are almost completely different from the road exhausts with some complex forms and details. Even the retaining straps have intricate cutouts. @Stef N. They could be printed by someone with the design foo. I'm strictly a 2D designer and I haven't the time to invest in 3D. I wish that I did, because it's already revolutionising this hobby. I did wonder whether @nick of Unobtainium, and gold-winning F40 engine fame, might be interested in producing some if there's a market for them. Me and you would buy some, right? 😉 2 Link to comment Share on other sites More sharing options...
Stef N. Posted December 22, 2021 Share Posted December 22, 2021 I'd definitely buy some and as no one seems to make aftermarket exhausts for these bikes* there would be a market for them. Not enough to make a man millions but should be enough to make it worthwhile setting up the design. *Other than in a £70 set by Hobby Design.😀 1 Link to comment Share on other sites More sharing options...
nick Posted December 22, 2021 Share Posted December 22, 2021 7 hours ago, Ade H said: I did wonder whether @nick of Unobtainium, and gold-winning F40 engine fame, might be interested in producing some if there's a market for them. Me and you would buy some, right? 😉 Show me then, what are we talking about? Link to comment Share on other sites More sharing options...
gamblor916 Posted December 22, 2021 Share Posted December 22, 2021 Another option Akrapovic are easy to scratch build. 2 Link to comment Share on other sites More sharing options...
gamblor916 Posted December 22, 2021 Share Posted December 22, 2021 But Termis and Ducati are like ham and eggs. 1 Link to comment Share on other sites More sharing options...
Ade H Posted December 22, 2021 Author Share Posted December 22, 2021 (edited) Hello @nick. Thanks very much for replying. I haven't any photos of my own, so I'll just link to a couple of the better ones that I found. If it would help to have some photos of the kit parts, let me know and I'll be happy to oblige. https://www.termignoni.it/wp-content/uploads/2021/02/D129_Superbike-1-01.jpg https://www.forza-moto.com/upload/photo/orig_img-5597-32.jpg https://smgmedia.blob.core.windows.net/images/113420/1024/ducati-1199-panigale-ddf65be0b8c6.jpg If you are interested in making a set and it would be viable for you to do, that would be brilliant. 😃 Edited December 22, 2021 by Ade H bod spelinge 1 Link to comment Share on other sites More sharing options...
Ade H Posted January 22, 2022 Author Share Posted January 22, 2022 @nick Hi Nick. I was wondering if you had a chance to look into the possibility of making these exhausts. Don't worry if it's not feasible. Many thanks for looking into it. Link to comment Share on other sites More sharing options...
One 48 Posted January 25, 2022 Share Posted January 25, 2022 I would be interested in these too if my vote makes them any-more viable for you to produce Nick. 1 Link to comment Share on other sites More sharing options...
nick Posted January 25, 2022 Share Posted January 25, 2022 3 hours ago, One 48 said: I would be interested in these too if my vote makes them any-more viable for you to produce Nick. OK, OK I’ll pick the kit up. I expect you’ll be wanting decals too then? Nick 2 Link to comment Share on other sites More sharing options...
nick Posted January 25, 2022 Share Posted January 25, 2022 OK the kit is on order, I’ll see what I can do. Nick 1 1 Link to comment Share on other sites More sharing options...
Ade H Posted January 25, 2022 Author Share Posted January 25, 2022 (edited) Thanks very much indeed for filling this gap for us all, Nick. Your work is really appreciated. Regarding decals, I'm not sure what @Stef N. and @One 48 reckon, but I have a few spare decals from a Senna set, so I'm OK. Just getting the pipes would be awesome enough! 😃 Edited January 25, 2022 by Ade H 1 1 Link to comment Share on other sites More sharing options...
Stef N. Posted January 25, 2022 Share Posted January 25, 2022 17 minutes ago, Ade H said: Thanks very much indeed for filling this gap for us all, Nick. Your work is really appreciated. Regarding decals, I'm not sure what @Stef N. and @One 48 reckon, but I have a few spare decals from a Senna set, so I'm OK. Just getting the pipes would be awesome enough! 😃 One thing I'm not short of. That's a corner of the market well covered.👍 1 1 Link to comment Share on other sites More sharing options...
One 48 Posted January 25, 2022 Share Posted January 25, 2022 Thanks Nick, most appreciated, will spread the word if that is helpful for you 👍 1 Link to comment Share on other sites More sharing options...
Jimbo1981 Posted January 30, 2022 Share Posted January 30, 2022 Following this with interest. Im building the 916 1:12 kit from tamiya but i really want to build it as the sps carl fogarty special. Ive got the marso wheels sorted but need carbon detailing and this model had termi pipes. I also need the decal set but cant find it anywhere. Link to comment Share on other sites More sharing options...
nick Posted January 30, 2022 Share Posted January 30, 2022 I’ve got the kit now. Not easy - there’s some close tolerances going on there and very few straight lines! I’m not a bike guy, but this is a very impressively engineered thing (the real bike) standby Nick 1 2 Link to comment Share on other sites More sharing options...
Stef N. Posted January 31, 2022 Share Posted January 31, 2022 11 hours ago, Jimbo1981 said: Following this with interest. Im building the 916 1:12 kit from tamiya but i really want to build it as the sps carl fogarty special. Ive got the marso wheels sorted but need carbon detailing and this model had termi pipes. I also need the decal set but cant find it anywhere. There's a Japanese company called MuseumCollection that do these different types of decals but I don't know how good they are and they are reasaonably expensive (on ebay). You'll have to do a bit of research to check if you are wasting your money or not but they seem to have a couple of the Fogarty Ducatis. https://www.museumcollection.jp/ Link to comment Share on other sites More sharing options...
nick Posted January 31, 2022 Share Posted January 31, 2022 14 minutes ago, Stef N. said: There's a Japanese company called MuseumCollection that do these different types of decals but I don't know how good they are and they are reasaonably expensive (on ebay). You'll have to do a bit of research to check if you are wasting your money or not but they seem to have a couple of the Fogarty Ducatis. https://www.museumcollection.jp/ Now I’ve looked properly the badges on these things are in relief and riveted on, so it MAY be possible to print them, although probably too fine and too difficult to paint. Nick 3 Link to comment Share on other sites More sharing options...
Stef N. Posted January 31, 2022 Share Posted January 31, 2022 That sounds good. I have some of these tucked away in the stash so just the shape would be great. 👍 1 Link to comment Share on other sites More sharing options...
Jimbo1981 Posted January 31, 2022 Share Posted January 31, 2022 6 hours ago, Stef N. said: That sounds good. I have some of these tucked away in the stash so just the shape would be great. 👍 Hi stef. Can these decals be copied? Where did you get them? Link to comment Share on other sites More sharing options...
Stef N. Posted January 31, 2022 Share Posted January 31, 2022 The Senna ones are available from Hiroboy. For a tenner you get plenty of spares. 1 Link to comment Share on other sites More sharing options...
One 48 Posted February 1, 2022 Share Posted February 1, 2022 +1 recommendation for Hiroboy, decals, bits n bobs and kits, based in UK, dealt with them a lot over the years for my Motorcycle 1/12 add-ons, good company who have never let me down, only UK retailer of Zero custom matched paints too I think. A pure Aladdin cave of interesting exotica for model Bikes and Cars, some stuff are of limited prints or editions abd can go out of stock fast, so if you see something you fancy there, my advice is to grab it, did so recently for some decal sheets. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now