Jump to content

Zoukei-Mura F-4EJ Kai Phantom Forever 2020


Gidge

Recommended Posts

14 minutes ago, helios16v said:

What are you using for chrome paint?  That looks really good.

 

@helios16vI'm using SMS Hyperchrome Cold Tone (they also do a warm time) over an SMS Jet Black base. It needs to go over a high gloss black base. Also if you're going to run a clear coat over it make sure it's water based as a lacquer based one will reactivate the pigments and loose the shine.

https://www.scalemodeller.com.au/products/hyperchrome-cold-tone-30ml

https://www.scalemodeller.com.au/products/premium-jet-black-30ml

 

Edited by Gidge
  • Thanks 1
Link to comment
Share on other sites

  • 2 weeks later...

New Ware masks make a huge difference. It's a bit fiddley to get them properly aligned on the inside of the closed canopy parts, would be a lot easier on the segmented open canopy.

 

1213569-92942-30-1440.jpg

 

1213570-92942-62-1440.jpg

 

1213571-92942-12-1440.jpg

 

1218031-92942-15-1440.jpg

 

1218032-92942-93-1440.jpg 

Link to comment
Share on other sites

On 5/3/2022 at 10:08 AM, Gidge said:

A little heavy handed on the canopy tinting but I'm happy with that.

 

So easy to do.  "Just a little more....oops."  It'll still look good, especially w/ the blue markings.  Artistic license!  ;)

Bravo for taking the time to mask the inside of the canopy.  I'm too lazy, unless I'm doing an open canopy (which is exceedingly rare).

  • Like 1
Link to comment
Share on other sites

55 minutes ago, helios16v said:

 

So easy to do.  "Just a little more....oops."  It'll still look good, especially w/ the blue markings.  Artistic license!  ;)

Bravo for taking the time to mask the inside of the canopy.  I'm too lazy, unless I'm doing an open canopy (which is exceedingly rare).

 

I bought the New Ware pre cut masks set which made it considerablyquickerand easier . That has two sets of outer masks to do the yellow canopy seals instead of using the decals, then use a slightly larger set to do the black frame over the top of that. To achieve that look you need to paint the inside otherwise it'll look yellow.  I figured it would also be be easier to glue mirrors to a painted surface than the very slick unpainted canopy

Link to comment
Share on other sites

  • 1 month later...

So some much needed progress updates that I was too lazy to upload at the time.

I tried to get the mirrors hapening but they were too small and I managed to loose one so I gave up, deciding they'd be barely visible on a closed canopy anyway.


1226349-92942-70-1440.jpg

 

1226350-92942-85-1440.jpg

 

1226365-92942-43-1440.jpg

 

1226366-92942-17-1440.jpg 

  • Like 1
Link to comment
Share on other sites

And now onto the HGW seatbelts. These things looked huge in the pictures online and easy to work with in the YouTube videos of their WW2 sets (possibly some 32 scale versions). 

 

Of course the setup on a fighter jet's ejection seat is much more complex

1248553-92942-80-1440.jpg

 

1248555-92942-17-1440.jpg

 

1248554-92942-93-1440.jpg

 

1248556-92942-36-1440.jpg

 

1248557-92942-63-1440.jpg 

 

1248568-92942-30-1440.jpg 

 

1248579-92942-38-1440.jpg 

 

1248586-92942-38-1440.jpg

 

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...