Grey Beema Posted October 2, 2021 Share Posted October 2, 2021 Built as part of the Grumman Hellcat Single Type Group Build but fitting in with my overall build theme of aircraft of FAA Aces, I though you might want to have a quick look at these.. The kit used was the 1/48 Eduard MkI / MkII Combo boxing. The models were painted using Xtracrylics for the base camouflage. Anti corrosion treatment / new paint was using Hataka Acrylics (slight difference in colours). Tamiya / Life colour for weathering. Box / Xtradecal generic marking sets for the markings.. The two aircraft I chose to build were:- Hellcat MkI FN411/5°E 1839 NAS HMS Indomitable Oct 1944, Operation Millet. Flown by Sub Lieutenant Edward “Tug” Wilson. Wilson’s family heralded from Co. Meath and emigrated to South Africa between the wars. Tug Wilson volunteered for the South African Naval forced and served as a member of the Fleet Air Arm On 19.10.44 (1010) SLt Wilson destroyed 2 x Ki-43 ‘Oscar’ 3m S of Car Nicobar flying Hellcat I FN411/5*E “In the meantime the enemy made an appearance over the fleet, but were met by our Hellcats and Vics’s Corsairs. The Corsairs shot down four and the Hellcats three, all Oscars. Tug Wilson destroyed two and (John) Smithwick one. They were flying with Bing (John Hawkins) and Claude (Lt RC Westfield), who was just about to press the ‘tit’ when Tug nipped in before him and shot it down. Bing got on a Jap, but his electrics failed so his guns failed to fire”. SLt R McKenzie Hellcat I FN411/5*E This is the effect I was after This is how it turned out Hellcat MkII JW867/W116 1844 NAS HMS Indomitable May 1945 Operation Iceberg Oolong, flown by Sub Lieutenant William “Bill” Atkinson. On 21st May The one success had been when Hellcats from Indomitable on a CAP, had been vectored out to investigate a radar plot at about 30,000 feet, 36 miles from the fleet. They found a Myrt shadowing the task force and after a brief fight it was shot down. 21.05.45 Nakajima C6N ‘Myrt’ Shared destroyed Grumman Hellcat II JW867/W116 Here is (I think) the real aircraft in April when the CO had an encounter with the barrier. This is my interpretation one month later. Couple of slides from my Aces pack (where I keep pictures of my models) Hope you enjoyed them Thanks for stopping by.. 54 3 Link to comment Share on other sites More sharing options...
billn53 Posted October 2, 2021 Share Posted October 2, 2021 Excellent! I do like how your weathering turned out. 1 Link to comment Share on other sites More sharing options...
stevej60 Posted October 2, 2021 Share Posted October 2, 2021 Stunning builds GB,some of the beast paint and weathering I've had the pleasure of seeing. 2 Link to comment Share on other sites More sharing options...
noelh Posted October 2, 2021 Share Posted October 2, 2021 That's great work, great photos too. The weathering is spot on. Dare I say it the Hellcat looks better in FAA colours than USN. 2 Link to comment Share on other sites More sharing options...
Dunny Posted October 2, 2021 Share Posted October 2, 2021 Superb work GB - I think you have perfectly captured the weathering on both aircraft. Two of the best FAA Hellcats I've seen, Cheers, Roger 1 Link to comment Share on other sites More sharing options...
binbrook87 Posted October 2, 2021 Share Posted October 2, 2021 Wow! They are 2 absolutely stunning builds. The paintwork and weathering are really outstanding 👍 1 Link to comment Share on other sites More sharing options...
tonyot Posted October 3, 2021 Share Posted October 3, 2021 Oh mate you have cracked both of these,...... they are both superb and I love the weathering,..... perfect,..... just perfect. Cheers Tony 2 Link to comment Share on other sites More sharing options...
Madmaks Posted October 3, 2021 Share Posted October 3, 2021 Simply awesome 👍 1 Link to comment Share on other sites More sharing options...
Grey Beema Posted October 3, 2021 Author Share Posted October 3, 2021 Thanks for all of your kind comments. It is really appreciated.. 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted October 3, 2021 Share Posted October 3, 2021 What a cracking pair of models, with some wonderful backround information too. The paintwork and weathering looks lovely, I love the areas over the wings where people have walked. Congratulations on a superb finish on both. Chris 1 Link to comment Share on other sites More sharing options...
russ c Posted October 3, 2021 Share Posted October 3, 2021 Really nice pair of Hellcats, weathered to perfection 1 Link to comment Share on other sites More sharing options...
mahavelona Posted October 3, 2021 Share Posted October 3, 2021 That really is fantastic weathering. It's unusual to see such a realistic finish pulled off. Can I ask about your techniques? 1 Link to comment Share on other sites More sharing options...
wellsprop Posted October 3, 2021 Share Posted October 3, 2021 Superb models, you've really captured the look of BPF Hellcats! 1 Link to comment Share on other sites More sharing options...
Murewa Posted October 3, 2021 Share Posted October 3, 2021 Wow! Those are awesome! Love the heavy weathered effect, really captures the effect like the photos. 1 Link to comment Share on other sites More sharing options...
Grey Beema Posted October 4, 2021 Author Share Posted October 4, 2021 20 hours ago, mahavelona said: That really is fantastic weathering. It's unusual to see such a realistic finish pulled off. Can I ask about your techniques? Thank you for your kind comments. For the weathering I plan it from the start of painting. The aircraft was sprayed all over with aluminium from Halfords and left for at least 24 hrs ( probably until next session next weekend). Next overall coat was to represent chromate yellow primer, again overall (I used a Tamiya paint here - again leave to harden. TSS was next using Xtracrylics paints which are quite soft so they get a coat of Klear and left for a few days. Markings, coat of Klear. I then do a light mist of medium or light grey from a height to tone down the colours (inc Roundels). Then for the worn areas it’s a case of fine emery paper and wet & dry and abraded away paint in high traffic areas, going down to the Primer (zinc chromate) and Aluminium. I then used a small piece of foam to ‘dry dab’ the colour representing hand prints and stains, in line with the first photo. I made good any areas where I went too far using Hataka TSS Colours (slightly different shade). Airbrushed the exhaust to finish. Overall satin varnish, then Matt in the stained areas... Quite straight forward but plan ahead. If you think you need more - stop and walk away. Don’t be scared to wash off paint you have put on.. Hope that helps.. 2 Link to comment Share on other sites More sharing options...
Bobby No Mac Posted October 4, 2021 Share Posted October 4, 2021 I really like the effect that you have achieved with those cool cats. Thanks for sharing your techniques too, most helpful. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now