Paramedic Posted September 13, 2021 Share Posted September 13, 2021 Hi, my J34 will be done, but i got that urge to get a J 26 as well. I have not swung my airbrush in anger nor derped around with any weathering stuff for quite some time and felt I needed an easy kit to get back into the saddle.. So I will begin with the J 26. I really like those Airfix boxing where I get the Swedish decals too. They have done alot of that over the years and I really apprecaite that. However, I will use Moose Republic decals since the national insignias are a little off - and I want a special indiviaual. J26MustangInstructionsPart3Page1_2MRD (From Moose Republic Decals) 26031, the green and blue-grey one. A good practice subject for the (repainted in Swedish colours, the same ) J 34 afterwards. I will not make the Swedish thing above the radio set for the dhingy (?) - I just want to make a simple build and get back into painting. An Airfix kits feels perfect for that! I planned to keep it simple, after looking the parts over, I will probably not even use the Eduard steel seatbelts but paint the moulded parts. Saving those belts for the next one.(Probably an Eduard one!) IMG_0133 I honestly do not think they look too bad in the box! IMG_0134 Started by cutting some plastic and ordering the appropriate decals (getting them tomorrow, or even today?) And that is where the 1/32 J 26 comes into play.. I have forgotten a Tamiya build I started.. Years ago.. I put alot of effort into the cockpit with extra decals and stuff from barracuda. IMG_0135 But still a paint noob, sprayed a little too thick here and there which made the big assembly a bit messy. IMG_0136 It made me put it away into a cupboard.. And I forgot about it, basically.. I see the big box now and then.. I have decals for "Daddy´s Girl" for it and originally I had "The Enchantress" but those were given to a friend that both builds and paints better so felt like a better home.. I think I will finish it off as J 26 instead. It might not be under this group build but it certainly made me want to do it some justice. If I can´t stand the defects alter, I´ll just give it to someone who doesn´t care (usually my siblings´ kids). But the 1/4 J 26 will be done! Hopefully with less mistakes.. Also manage to pick up a book on the J26s, hopefully arriving this week.. Seems like a good read and written, by, iirc, an old J 26 pilot.. 8 Link to comment Share on other sites More sharing options...
Marlin Posted September 13, 2021 Share Posted September 13, 2021 A double Mustang build, what's not to like. /Bosse 1 Link to comment Share on other sites More sharing options...
Paramedic Posted September 13, 2021 Author Share Posted September 13, 2021 The big one is more than 25% built i guess.. But made a guest appaerence? Sad I have not done it yet.. The picture makes the problems much more appaerent than they are "in real life". I think it can still be finished off decently however. Link to comment Share on other sites More sharing options...
Marlin Posted September 13, 2021 Share Posted September 13, 2021 I guess that as long as you don't post the 1/32nd one in the Gallery it'll be ok to build it here. /Bosse 2 Link to comment Share on other sites More sharing options...
trickyrich Posted September 14, 2021 Share Posted September 14, 2021 More Mustangs.... and a 1/32nd beast as well!!! Now you have the perfect excuse to finished her! As Bosse mentioned she's not eligible for the gallery but I/we would love to see her built as well. A green an NMF Mustang would look great together. Link to comment Share on other sites More sharing options...
Paramedic Posted September 14, 2021 Author Share Posted September 14, 2021 20 hours ago, Marlin said: I guess that as long as you don't post the 1/32nd one in the Gallery it'll be ok to build it here. /Bosse Yeah, I´m too slow to get it done within the time frame anyways.. 7 hours ago, trickyrich said: More Mustangs.... and a 1/32nd beast as well!!! Now you have the perfect excuse to finished her! As Bosse mentioned she's not eligible for the gallery but I/we would love to see her built as well. A green an NMF Mustang would look great together. Yeah, I´ll finish her off.. i really liked the work I put into the cockpit.. But I guess the Airfix one will be the GB. 2 Link to comment Share on other sites More sharing options...
Paramedic Posted September 16, 2021 Author Share Posted September 16, 2021 Right.. Glued some stuff - but I have been (impatiently!) waiting for some stuff - the J 26 book and I will pick up Brett Green´s book on the Tamiya 1/32 build, again.. Had it, foolishly sold it. But remembered how good it was for cockpit reference etc. A bus ride later and i have it too. I did a couple of mistakes, already! Cut too much of the tail weel, the pin for the hole.. Oops! Can´t just blame Airfix, was too eager.. But I think I managed to make it strong enough. Then the seat was glued it and somehow was listing.. Hmm.. Had to break it off the armour plate and re-glue... Note to self, calm the fakk down.. And shockingly, I won´t fill those, what are they called again? The push out marks?? In the cockpit walls. They won´t be seen.. It bugs me too knowing they are there.. But this was supposed to be a quick (lol) build, fast forward tothe painting - fresh up the little skills I have so.. It won´t be visible - so i don´t care..😚 The j 26 book is really good! As are the decals.. IMG_0140 Looking forward to get some paint slabbed on.. 5 Link to comment Share on other sites More sharing options...
Paramedic Posted September 16, 2021 Author Share Posted September 16, 2021 Got my book alright.. And then some.. Next Nordic Group build? IMG_0141 5 Link to comment Share on other sites More sharing options...
Col. Posted September 16, 2021 Share Posted September 16, 2021 Cool subject choice 2 hours ago, Paramedic said: Got my book alright.. And then some.. Next Nordic Group build? IMG_0141 Yes! 1 Link to comment Share on other sites More sharing options...
Paramedic Posted September 17, 2021 Author Share Posted September 17, 2021 Thanks. Glued the wings together, so I can paint the wheel bays - undercoat it, when i start on the cockpit. It´s getting closer to paint.. ^^ In the meantime, compared Airfix decals with MooseRepublic´s IMG_0142 Airfix at the top. I´ll go with Robban´s/Moose Republic´s, a little better blue. More apparent in real life even. So, the flaps, will be lowered. But the colour of the insides - I googled a bit and see mostly metallic, some painted olive drab as the rest of the subject.. No zonk chromate or even interior green? metallic it is? 1 Link to comment Share on other sites More sharing options...
trickyrich Posted September 18, 2021 Share Posted September 18, 2021 to be honest I don't think I've ever noticed what colour the insides of the flaps of a Mustang are! I guess you can't really be wrong which ever ay you go, I expect there was a bit of variation out there. 1 Link to comment Share on other sites More sharing options...
Paramedic Posted September 19, 2021 Author Share Posted September 19, 2021 Yeah, I think so too. The subject is mentioned in the book (I´m reading it from front to back!) as being damaged. Shortly after delievery they were starting the engine at Bromma airfield (which I can see aircraft taking off from as we "speak!" ) - but they were yet fully introduced to it and the engine went to full power or something - amking it tilt forward and the prop shattered (the engine was oaky though). That is why this particular airframe was delayed to F 16 Wing in Uppsala - and used for testpainting at Bromma, Stockholm (FFVS). If I can´t find any more info, I´ll just resume that it was repainted with flaps up and I will make it aluminium. Probably looks better too. Started painting, primed the cockpit and wheel house - but my brother is sleeping voer here just now, in my one room flat so can´t paint today.. He does that since he works night shifts in town and they are working on the rails where he lives, 30km off - so takes too long on the bus until next shift.. Luckily I live close to his work - but that means I can´t use the airbrush - had I gotten the interior green in last night, I could have brush painted right now.. Link to comment Share on other sites More sharing options...
Paramedic Posted September 19, 2021 Author Share Posted September 19, 2021 Got a little bit done.. Every little step eh? ;9 Took a spare Draken upper half and primed for some later tests.. I still have alot of that older Vallejo one. IMG_0149 And then I got a single layer of interior green (Gunze) and a mix for zink chromate (Tamiya mix) on.. And then I read about the colours there "should" be.. Which is a bit inconclusive but it should, officially not be that.. Or so I read.. But the green one.. or sometimes this.. or sometimes unpainted... Ah well. IMG_0151 A couple of more layres tomorrow and then some brush painting! 4 Link to comment Share on other sites More sharing options...
Paramedic Posted September 23, 2021 Author Share Posted September 23, 2021 Done some work.. But sometimes when I do a quick and easy build - I rush too much and that kinda happened here. Lost interest, in the interior, a little bit.. This was meant as afast build to try new paints and my new(-ish) airbrush on. I have another two big Tamiya P-51Ds (one K box).. I enjoyed doing the cocpit for the first one - but i did not really, on this Airfix.. 8I also have an Eduard and will probably buy more!) So I did very basic painting.. It irks me a bit.. But I did not enjoy it. Used a mix of vallejo and Citadell paints over the Gunze H 58 Interior Green (and did not paint the floor black!). Kit´s decal for the IP - which is the first such thing I´ve used I think? Not bad really! Really nice to be able to do that from the boxing! I honestly don´t know what that cuchion thing is supposed to be. Doesn´t look like the life raft and the instructions mentioned some brown (leather) Humbrol colour.. So painted it brown.. I also assembled pretty much everything (but the prop!) for the big one.. Yeah, it´s gonna be wheels up.. Haven´t done that since I was a kid and it is with mixed feelings.. 2 Link to comment Share on other sites More sharing options...
modelling minion Posted September 23, 2021 Share Posted September 23, 2021 Your Mustangs are coming along very nicely. I think you have done a good job on the cockpit. Doing a Mustang with it's gear up and in flight shows off the aircraft's graceful lines, as well as saving having to build the undercarriage. 1 Link to comment Share on other sites More sharing options...
Paramedic Posted September 23, 2021 Author Share Posted September 23, 2021 Thanks. It was kinda that..It´s been resting for five years I think.. 😚 But i liked the job I did in the cockpit - some Barracuda Stuioos placards, HGW belts and life raft.. But the work on the wheel wells - and some fitting issues (totally my fault) made me a bit.. Unsatisfied.. I remembered the stand and figured I should get it done. I learned the lesson and will be more careful the next time. It is a bit of an easy road and a little failure - but if I paint it okay, I can forgive myself.. 1 Link to comment Share on other sites More sharing options...
Paramedic Posted September 25, 2021 Author Share Posted September 25, 2021 Been playing too much War Thunder. flying J 26, P-51B/C, -D, Thunderbolt I, P-47Ds, M etc.. But I have done a little. Had to fill some gaps - dunno if it was me or the kit.. I don´t mind the kit, but it is a bit "chunky".. I want to do my Eduard soon - and maybe try Meng´s.. Might do an Airfix again, but probably not.. Don´t feel like a kit snob but.. I kinda like Tamiya´s (newer, not their P-51D), Eduard, hasegawa more.. Or I might change my mind when I´ve tried the others! IMG_0168 IMG_0169 IMG_0170 IMG_0171 Bought some new brushes too, my old ones - are old.. 6 Link to comment Share on other sites More sharing options...
Paramedic Posted September 25, 2021 Author Share Posted September 25, 2021 Starting to look like a Mustang? I´m really longing to paint it.. 7 Link to comment Share on other sites More sharing options...
modelling minion Posted September 25, 2021 Share Posted September 25, 2021 Very nice work, definitely Mustang shaped. 1 Link to comment Share on other sites More sharing options...
Paramedic Posted September 25, 2021 Author Share Posted September 25, 2021 Thanks. I am enjoying it more now.. ^^ Needs some filler between that thing in front of the wheel house and the chin.. but it is okay.. Probably my fault.. And it is not too much.. 1 Link to comment Share on other sites More sharing options...
modelling minion Posted September 25, 2021 Share Posted September 25, 2021 It may not have the finesse of the new Eduard kits but it doesn't look bad at all, and I haven't built a kit yet that didn't need some filler somewhere. 1 Link to comment Share on other sites More sharing options...
Paramedic Posted September 25, 2021 Author Share Posted September 25, 2021 Yeah true.. Well, I think I have built a few Tamiyas that did not require it.. Thought about that when I bought my filler - Tamiya.. And that is the kits I use it the least on, lol.. I don´t mind Airfix, I like them - it is the stuff I grew up with! (Though i preferred Matchbox! ) . And they make nice subjects.. So it was no critique on them.. I think they are good for beginners - they might be put off, from Eduard? And they are/have become much better.. 1 Link to comment Share on other sites More sharing options...
Paramedic Posted September 26, 2021 Author Share Posted September 26, 2021 Bonus pic.. 5 Link to comment Share on other sites More sharing options...
Paramedic Posted September 26, 2021 Author Share Posted September 26, 2021 Oops, I just realzied I filled too much - the slot for the canopy.. I need to fix that. Link to comment Share on other sites More sharing options...
Paramedic Posted September 28, 2021 Author Share Posted September 28, 2021 Masked and painted the canopy parts Interior Green - and glued on the flaps.. I had planned not to. But looking the model over, it is.. Warped somehow.. Looking from the front, the tail is slightly out of alignment.. Kinda weird. So I decided to finish it off a little quicker (so no alclad on the inside of the flaps for example), give it tto dad once finished and make another one! My dad has not built models since the 80s I think - but he gets happy everytime I give him one of mine (usually something I find a mistake on but he doesn´t care.. ) Undercoated it with Vallejo´s Surface Primer. usually I use Ultimate primer (Bagder?) since it cures much faster. But I still have a big bottle of Vallejo´s - and the model will have time to cure properly, I will have less time to paint this week so will leave it until next week... Saw that there is a custom skin for (Blue/)"Blå Niklas" in War Thunder.. Not totally correct (walkways for one thing) - but I like the colours! That 325M has a nice feeling too it.. And the grey ain´t bad either. Yeah I definitely want to do another one..! Maybe try Eduards - or Meng.. or I wouldn´t mind another Airfix now.. .) Just be a little more careful and not rush it too much.. ...and then I also feel like making a Dark Green and Ocean Grey RAF (Polish?) Mustang...... 8 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now