Marlin Posted September 10, 2021 Share Posted September 10, 2021 Every reason to have a beer is a god one in my book. /Bosse 1 1 Link to comment Share on other sites More sharing options...
JeroenS Posted September 10, 2021 Author Share Posted September 10, 2021 8 minutes ago, Marlin said: Every reason to have a beer is a god one in my book. /Bosse Exactly, we can always think of something 🙂 Link to comment Share on other sites More sharing options...
JeroenS Posted September 11, 2021 Author Share Posted September 11, 2021 I started on the crane. It's fun but it will probably take a good while, which is fine of course. This kit is really good and the instructions are excellent. I will just have to keep reminding myself to take it easy and triple check everything before moving on. First thing was to sort out the different types of rods and tubes. There's a list in the instructions, most are listed in imperial measurements which can be expected from a UK based company, so that's fine too. However, I have no idea what 3/16 of an inch looks like so google answered these questions for me. The tubes are in their appropriate spots. Don't start shaking that box now.... This is the result after the first 3 steps. It's all very precise so I hope I'm getting it right (enough). Step 4 is about placing the mounts. It will look something like this but the mounts on the left need to be fitted to chassis size. This means I will now build a part of the chassis to make sure the position of the mounts is correct, before moving on and glueing them. 10 Link to comment Share on other sites More sharing options...
modelling minion Posted September 11, 2021 Share Posted September 11, 2021 That looks to be as much of an engineering project as it is a modelling one Jeroen, very neat work. 1 Link to comment Share on other sites More sharing options...
JeroenS Posted September 11, 2021 Author Share Posted September 11, 2021 2 hours ago, modelling minion said: That looks to be as much of an engineering project as it is a modelling one Jeroen, very neat work. You're right, it is! It's somewhere between kit and scratchbuilding. It's very well thought out I must say. 1 Link to comment Share on other sites More sharing options...
trickyrich Posted September 13, 2021 Share Posted September 13, 2021 NICE!!!! 🥰 The mould work on the resin looks very nice, much cleaning up required? I live in a country that has had the metric system for decades, yet my company does all it's pipework on jobs in imperial... go figure! 1 Link to comment Share on other sites More sharing options...
JeroenS Posted September 13, 2021 Author Share Posted September 13, 2021 12 minutes ago, trickyrich said: The mould work on the resin looks very nice, much cleaning up required? They are nice. Virtually no cleanup required. 1 Link to comment Share on other sites More sharing options...
JeroenS Posted September 13, 2021 Author Share Posted September 13, 2021 So, in order to check the position of the crane, or rather the crane supports, I built the chassis. That was a quick job. The crane's front mounts are fixed, the rear ones adaptable to fit the chassis width at that particular point. U-bolts are to be placed arount the chassis beams, connecting the crane to the chassis. By testing the position of the crane I became a little wiser but not much, as I still could not determine a final position for the crane. It should be placed right around where the chassis tapers so I can't really be sure until I know how wide the crane will be, and where the cab wall will be. So I decided to leave the rear mounting blocks off for now, they can be easily glued on as a final step. I worked on the crane a little more and added two more mediums: white metal and etch. Again, measurements were precise but I think so far so good. 11 Link to comment Share on other sites More sharing options...
busnproplinerfan Posted September 13, 2021 Share Posted September 13, 2021 Who’s wheels are the resin ones? Link to comment Share on other sites More sharing options...
JeroenS Posted September 14, 2021 Author Share Posted September 14, 2021 9 hours ago, busnproplinerfan said: Who’s wheels are the resin ones? They're from https://www.kitformservices.com/ .... I just bought a whole bunch of stuff this weekend, the owner is retiring this year. There is talk of new ownership, but you never know which products will be continued. So I bought enough for about 7 trucks. Link to comment Share on other sites More sharing options...
busnproplinerfan Posted September 14, 2021 Share Posted September 14, 2021 27 minutes ago, JeroenS said: They're from https://www.kitformservices.com/ .... I just bought a whole bunch of stuff this weekend, the owner is retiring this year. There is talk of new ownership, but you never know which products will be continued. So I bought enough for about 7 trucks. I better grab a few things then. Hate to see another caster go away. Link to comment Share on other sites More sharing options...
JeroenS Posted September 16, 2021 Author Share Posted September 16, 2021 Slowly but surely bits and pieces are added. Valve block and control levers, and the outrigger legs are started. The observant will notice that the piece of PE, here on the left, is in a different place. I misread the instructions, there was a correction in the text for the position of the control lever block but I thought it was for the PE part. I read too quickly. A little damage to the white plastic was done when removing the PE but that was easily repaired. The PE itself, luckily, is quite thick so it came off ok and was re-attached at the proper spot. I'm quite enjoying this intricate build. 6 Link to comment Share on other sites More sharing options...
trickyrich Posted September 16, 2021 Share Posted September 16, 2021 ... I'm not very observant! the detailing is lovely! 1 Link to comment Share on other sites More sharing options...
JeroenS Posted September 18, 2021 Author Share Posted September 18, 2021 Did some more work on the crane yesterday evening and this morning. The outrigger legs are complete, it's all movable as well. This is the first phase of the build, next up is the crane itself. 7 Link to comment Share on other sites More sharing options...
desert falcon Posted September 18, 2021 Share Posted September 18, 2021 High tech modelling at its best 👍 1 Link to comment Share on other sites More sharing options...
trickyrich Posted September 18, 2021 Share Posted September 18, 2021 first class work, gee it looks nice. 1 Link to comment Share on other sites More sharing options...
PattheCat Posted October 20, 2021 Share Posted October 20, 2021 I'd never dare to launch myself into such, it's an engineer's level build! Nicely done so far Jeroen. Cheers. Pat. 1 Link to comment Share on other sites More sharing options...
JeroenS Posted October 21, 2021 Author Share Posted October 21, 2021 Thanks guys. I can see it's been quite a while since I worked on the crane. Been doing a lot of construction work in the garden the past couple of weeks and didn't feel like doing anything else. But tonight was a quiet night and I felt mojo returning. I dug out the crane parts and started on some of the bigger resin pieces, adding mainly etch but also some other mediums as you can see. It still is an enjoyable build. Sadly I was not able to source decals for the crane, they were not available at the time I bought it and are not available anymore. It will probably look a little bare without a brand name and such. Well. Let's finish construction first. I might have some more time tomorrow evening. 7 Link to comment Share on other sites More sharing options...
JeroenS Posted October 22, 2021 Author Share Posted October 22, 2021 That's another one of the main components done, I think this is called the main boom. This is the underside. The protruding pieces of rod will be cut to size later on. The top side. Piping will be installed in the other ends of the circular bits that hold the rods. It's now time to start work on the "secondary jib", which is the piece of the crane that extends and ultimately holds the hook. I'm starting to get really curious how it will look when all the components are attached. At this point, there are only 2 resin pieces left, some styrene rods and tubes and 2 large pieces of rectangular tube which will form the jib. 9 Link to comment Share on other sites More sharing options...
Col. Posted October 23, 2021 Share Posted October 23, 2021 Certainly looks great Jeroen and good to know you're enjoying it 1 Link to comment Share on other sites More sharing options...
trickyrich Posted October 25, 2021 Share Posted October 25, 2021 gee it does look the part, been craning my neck out looking for an update. 1 Link to comment Share on other sites More sharing options...
JeroenS Posted November 4, 2021 Author Share Posted November 4, 2021 A little while later and I've completed the first part of secondary jib. Also, my 1:1 work in the garden is now finished so from now on I'll have more time to spend on this build, not a moment to soon either. It connects to the main boom like so And then finally we should end up with something like this The ram sleeve's connection to the underside of the main boom came loose when I put it in this position, but this is how it is supposed to end up. We'll see how that turns out, I don't much care for it being moveable anyway, it's not that I'll be playing with it. It just has to look convincing, and so far it does that nicely. 13 Link to comment Share on other sites More sharing options...
Richard E Posted November 4, 2021 Share Posted November 4, 2021 That is very tidy model making. 1 Link to comment Share on other sites More sharing options...
desert falcon Posted November 6, 2021 Share Posted November 6, 2021 Master engineering👍 1 Link to comment Share on other sites More sharing options...
John Masters Posted November 6, 2021 Share Posted November 6, 2021 Wow! This is soooo cool... 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now