Beard Posted October 9, 2021 Share Posted October 9, 2021 Thanks for the link. I bought some a while ago, to use as radiator mesh on a Frog Firefly, but it's too coarse; I'll give the 200 or 400 a go. 1 Link to comment Share on other sites More sharing options...
Cheshiretaurus Posted October 14, 2021 Author Share Posted October 14, 2021 While I'm still working out how to mount the snow guards, and possibly may change them to a more oval shape (there seems to be 2 types). This is the rear mount for the oval guards and Im having trouble getting it to print the vertical parts, the gauge of the frames is no less than the previous one, I'll keep tying different settings and maybe thicken up the vertical parts. Attention has turned to the tail wheel and its lack of anti-shimmy shape. I've cut a length of 0.5mm wide strip from 0.125mm plasticard and wrapped two lengths of it around the end of the tyre glued with TET quick set. The edges were then blended with the tyre with thin CA and its self levelling properties to smooth out. After a little sanding smooth, Ive given it a coat of MRP tyre rubber. Not perfect but probably better than it was. Aluminium paint next. CT 2 Link to comment Share on other sites More sharing options...
Cheshiretaurus Posted October 19, 2021 Author Share Posted October 19, 2021 Still no luck getting the back frame of the snow guard to print, think I just have to accept the fact its just too thin. so need to go back to fusion and change a few things. and thicken up a few areas. Attention today in the Tuesday modelling window went to finishing the tail wheel. Masked up and coat for Alclad Dull aluminium. Right the big question is where the (insert chosen word here) is my Molotow Chrome pen, I want to do the oleo! after fruitless search, its going to have to be a bit of baremetal foil cut a strip of 0.5mm x 2mm to wrap around and after several attempts and needing to cut new strips I finally got it in place. I've already sprayed the mainwheels, just need to weather them a little before putting them on. Might have another go with Fusion 360 tonight. CT 2 Link to comment Share on other sites More sharing options...
Cheshiretaurus Posted November 5, 2021 Author Share Posted November 5, 2021 Have been trying for around 2 weeks to get the oval ice guard to print but unsuccessfully so I'm going to use the first one that seemed to print successfully, don't know why they worked but they did. Sprayed MRP Med sea gray then attached with Gator grip. Wheels also went on a few days ago so I think I'll call this complete. I'll get some picture taken and make a post on the Ready for inspection area soon Thanks for looking and have a good evening CT And BTW if I ever get those damn oval ice guards to print in the future I might replace them but I wont be getting an 8K printer anytime soon! 🤑 7 Link to comment Share on other sites More sharing options...
Cheshiretaurus Posted November 6, 2021 Author Share Posted November 6, 2021 And finally in tribute to the Airfix team I've made the missing axle stands that they didn't complete on the undercarriage (see earlier in this thread) Tinkercad tinkering 3D printing & painting A bit of modelling And thats wrap folks! RFI thread here:- 7 1 Link to comment Share on other sites More sharing options...
Beard Posted November 6, 2021 Share Posted November 6, 2021 1 minute ago, Cheshiretaurus said: And finally in tribute to the Airfix team I've made the missing axle stands that they didn't complete on the undercarriage (see earlier in this thread) Tinkercad tinkering 3D printing & painting Blimey. 1 minute ago, Cheshiretaurus said: 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now