WV908 Posted July 12, 2021 Author Share Posted July 12, 2021 1 hour ago, Jack Ruskin said: the list of people with short shot faults seems to be growing, hope the spares dept' can cope ? I'd take a short shot wing over a missing one haha - it's sad that these QC issues continue to creep through. I remember the amount of 1st batch Sea Furies that were missing their tails. Anyway, have a photo of XL317's cockpit dry fitted; Erm, I've put *quite a bit* of weight in there as you can see. Cheers, WV908 5 Link to comment Share on other sites More sharing options...
RichG Posted July 12, 2021 Share Posted July 12, 2021 (edited) 2 hours ago, Jack Ruskin said: the list of people with short shot faults seems to be growing, hope the spares dept' can cope ? Do I feel lucky..?🤔 Hmm, better open up mine and have a check... Rich Update: Phew! QA checks now completed and happy to report every thing seems to be in place and fully formed - no extraneous intakes in the wing etc. No visible warping of parts. Dontcha just love Airfix! Good luck everyone. Edited July 12, 2021 by RichG 1 Link to comment Share on other sites More sharing options...
STRAT'71 Posted July 12, 2021 Share Posted July 12, 2021 Started one of mine. I don’t know what it is called, but is one of four of those pipes under the jammer plates is missing the front section. Fortunately easy to fix. Link to comment Share on other sites More sharing options...
Jack Ruskin Posted July 12, 2021 Share Posted July 12, 2021 22 minutes ago, STRAT'71 said: Started one of mine. I don’t know what it is called, but is one of four of those pipes under the jammer plates is missing the front section. Fortunately easy to fix. i have those surplus if interested ? Link to comment Share on other sites More sharing options...
STRAT'71 Posted July 12, 2021 Share Posted July 12, 2021 3 minutes ago, Jack Ruskin said: i have those surplus if interested ? If that is part F40 I would be grateful. Link to comment Share on other sites More sharing options...
Jack Ruskin Posted July 12, 2021 Share Posted July 12, 2021 yep, just PM me your details 2 1 Link to comment Share on other sites More sharing options...
viper-30 Posted July 12, 2021 Share Posted July 12, 2021 9 hours ago, WV908 said: Update - Spare wings are available and have been posted today! Maybe Hornby should take a page out of their sister company's book. Fantastic service from the Airfix spares team here. Cheers, WV908 Have to say I checked mine today and found both upper wings short shot .. emailed airfix this morning.. in the post by lunch time .. we’ll done them 1 Link to comment Share on other sites More sharing options...
Retired Bob Posted July 12, 2021 Share Posted July 12, 2021 I went and checked both of my kits today, nothing short shot but I noticed that one of the underside vent covers, part F16 was missing from the sprue. Good job each sprue is bagged I thought, I carefully opened the bag and checked the inside, no vent, it must have been knocked off before being bagged. Don't suppose it will be difficult to make one. 🙄 1 Link to comment Share on other sites More sharing options...
WV908 Posted July 12, 2021 Author Share Posted July 12, 2021 49 minutes ago, viper-30 said: Have to say I checked mine today and found both upper wings short shot .. emailed airfix this morning.. in the post by lunch time .. we’ll done them That's really good of the spares department. Equally that's gonna be a lot of broken up kits sat in their office readily available as spares. Would you be able to show us how bad your wings are please? Cheers, WV908 1 Link to comment Share on other sites More sharing options...
Gondor44 Posted July 12, 2021 Share Posted July 12, 2021 No visible problems or missing parts when I checked my three. Gondor 3 Link to comment Share on other sites More sharing options...
Jack Ruskin Posted July 12, 2021 Share Posted July 12, 2021 three.....!?! Link to comment Share on other sites More sharing options...
Gondor44 Posted July 12, 2021 Share Posted July 12, 2021 8 minutes ago, Jack Ruskin said: three.....!?! Well three new ones, I also have three old ones as well Gondor 1 Link to comment Share on other sites More sharing options...
Ruskin Air Services Posted July 12, 2021 Share Posted July 12, 2021 3 hours ago, RichG said: Do I feel lucky..?🤔 Hmm, better open up mine and have a check... Rich Update: Phew! QA checks now completed and happy to report every thing seems to be in place and fully formed - no extraneous intakes in the wing etc. No visible warping of parts. Dontcha just love Airfix! Good luck everyone. Checked mine over today everything seems OK. Airfix's Dakota kit suffers quite a bit from short shots, the other thing while I was looking over the sprues correct me if I'm wrong but there are two sets of exhaust nozzles one set for the 301's and the others for the 201's Link to comment Share on other sites More sharing options...
Jack Ruskin Posted July 12, 2021 Share Posted July 12, 2021 yeh, two sets of exhausts Link to comment Share on other sites More sharing options...
Rabbit Leader Posted July 12, 2021 Share Posted July 12, 2021 Let’s hope the Airfix spares department are as helpful when complaints start coming through from their International customers. History shows that they are more than helpful to assist UK modellers, however its a closed wallet case when it comes to sending parts overseas. I just hope when I eventually get mine, its all good? Cheers.. Dave p.s. Really nice to see modellers helping each other where possible here. Great going chaps. 1 Link to comment Share on other sites More sharing options...
WV908 Posted July 12, 2021 Author Share Posted July 12, 2021 1 hour ago, Gondor44 said: No visible problems or missing parts when I checked my three. Gondor I'm gonna have to buy a fourth now! 🤣 Link to comment Share on other sites More sharing options...
Adam Poultney Posted July 12, 2021 Share Posted July 12, 2021 4 minutes ago, WV908 said: I'm gonna have to buy a fourth now! 🤣 I like this idea! 1 Link to comment Share on other sites More sharing options...
Back in the Saddle Posted July 12, 2021 Share Posted July 12, 2021 5 hours ago, WV908 said: Erm, I've put *quite a bit* of weight in there as you can see. That’s an impressive balancing act! 😂 Shame about the QC issues that people are having. Mine appears to be OK so far - hopefully it will stay that way! 1 Link to comment Share on other sites More sharing options...
viper-30 Posted July 13, 2021 Share Posted July 13, 2021 10 hours ago, WV908 said: That's really good of the spares department. Equally that's gonna be a lot of broken up kits sat in their office readily available as spares. Would you be able to show us how bad your wings are please? Cheers, WV908 { 5 Link to comment Share on other sites More sharing options...
Jack Ruskin Posted July 13, 2021 Share Posted July 13, 2021 (edited) . Edited July 13, 2021 by Jack Ruskin Link to comment Share on other sites More sharing options...
WV908 Posted July 13, 2021 Author Share Posted July 13, 2021 On 7/11/2021 at 11:18 AM, XrayLima said: XL426's fin was repainted in 2018 using multilayer masks custom made by Flightlinegraphics to match the pre-existing markings. If it helps the debate about the Doppler (Green Satin) panel, this is 426's today. I believe it is still as it was when she retired in 1986 but no doubt there will have been different 'mod' states and paint schemes earlier in her career. Thanks for the photos Xray Lima - providing the aftermarket Olympus 202 faces appear on the market pretty quick, XL426 is jumping the queue ahead of XM594 Cheers, WV908 1 Link to comment Share on other sites More sharing options...
Sparkie Posted July 13, 2021 Share Posted July 13, 2021 2 hours ago, WV908 said: Thanks for the photos Xray Lima - providing the aftermarket Olympus 202 faces appear on the market pretty quick, XL426 is jumping the queue ahead of XM594 Cheers, WV908 from these photos and a few ive just been looking at Victors loading Blue Steel on a flikr account Ive just stumbled across, would a satin or gloss finish come the closest to in service subjects? One thing is for sure, its certainly not matt Link to comment Share on other sites More sharing options...
George Norman Posted July 13, 2021 Share Posted July 13, 2021 4 hours ago, viper-30 said: { I'd love to know how much a unit cost is per kit. Looks like the lowest quality crowd they go to produce this model and then charge a small fortune Link to comment Share on other sites More sharing options...
WV908 Posted July 13, 2021 Author Share Posted July 13, 2021 17 minutes ago, Sparkie said: from these photos and a few ive just been looking at Victors loading Blue Steel on a flikr account Ive just stumbled across, would a satin or gloss finish come the closest to in service subjects? One thing is for sure, its certainly not matt I wouldn't know I'm afraid, sorry Link to comment Share on other sites More sharing options...
STRAT'71 Posted July 13, 2021 Share Posted July 13, 2021 34 minutes ago, WV908 said: I wouldn't know I'm afraid, sorry I think as new they had a sheen, but after a bit of use they went Matt. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now