S-boat 55 Posted July 20, 2021 Share Posted July 20, 2021 Really like those tubs, looking good 1 Link to comment Share on other sites More sharing options...
Faraway Posted July 22, 2021 Author Share Posted July 22, 2021 I have been bending and sticking more brass, and will post some photos, perhaps later. But have had to retreat from my work room due to excessive heat.🥵🥵🥵 But it looks like the weather is cooling down, in the next day or so. I’ll be back. Jon 3 Link to comment Share on other sites More sharing options...
AntPhillips Posted July 22, 2021 Share Posted July 22, 2021 I know the feeling, impossible to concentrate indoors in this heat, so I took my 1/35 Thales Goalkeeper kit out to the back garden to give it a primer coat, big mistake, one of the photoetch footsteps decided to come unstuck (possibly heat related) and promptly headed to the floor, you thought the carpet monster was evil, just wait till you meet the gravel monster 😖 I've gone cap in hand to RPG Model to explain the predicament and so far their response has been excellent 😊 1 Link to comment Share on other sites More sharing options...
Faraway Posted July 23, 2021 Author Share Posted July 23, 2021 9 hours ago, AntPhillips said: you thought the carpet monster was evil, just wait till you meet the gravel monster 😖 I’ve got a plain wood floor and pieces STILL go missing. I reckon there is a small corner of the space time continuum, that is full of plastic and PE components. 1 2 Link to comment Share on other sites More sharing options...
Faraway Posted July 23, 2021 Author Share Posted July 23, 2021 (edited) Finally, been able to get back to my workbench. I put the PE into the lifeboats and then realised that I was going to present them with a tarpaulin cover, never mind it's good practice. Bit of tissue paper, followed by a dab of paint and bingo. I might even get away without weathering them. So, next I've finally fitted all the PE to the bridge/superstructure, still some plastic bits to fit but now ready for painting. That leaning bit that looks like it has caught a 15" shell, up front is not actually fixed yet, it covers the ships wheel and will be painted separately. Next we have the bridge/superstructure in all its grey glory, as I said still a few bits (ventilators etc) to fit. You remember that leaning piece of PE ? Well here it is, now ready to fit over the the raised bit of deck with the wheel on. And finally the three King Posts, now ready to go onto their little cabins and then to the deck. That's it for now, but progress is being made. I have to say I don't think I've ever had to bend so much brass for such small area. Jon Edited July 23, 2021 by Faraway 7 Link to comment Share on other sites More sharing options...
ArnoldAmbrose Posted July 23, 2021 Share Posted July 23, 2021 Gidday Jon, that superstructure in particular is very nicely done. That doesn't look like much shelter/protection for the helmsman on the wheel. Regards. Jeff. 1 Link to comment Share on other sites More sharing options...
Faraway Posted July 23, 2021 Author Share Posted July 23, 2021 1 minute ago, ArnoldAmbrose said: Gidday Jon, that superstructure in particular is very nicely done. That doesn't look like much shelter/protection for the helmsman on the wheel. Regards. Jeff. The wheelhouse proper is in the cabin below, behind the three rectangular windows. I imagine, the one on top was for docking ? Jon 1 Link to comment Share on other sites More sharing options...
S-boat 55 Posted July 23, 2021 Share Posted July 23, 2021 That is looking really good, a lot of PE as you say but it's worth it 1 Link to comment Share on other sites More sharing options...
beefy66 Posted July 23, 2021 Share Posted July 23, 2021 So much for the heat wave stopping you looks like your flying along with this Jon. 👍 Stay Safe beefy 1 Link to comment Share on other sites More sharing options...
Faraway Posted July 23, 2021 Author Share Posted July 23, 2021 2 minutes ago, beefy66 said: So much for the heat wave stopping you looks like your flying along with this Jon. 👍 Stay Safe beefy Cheers beefy. It doesn’t feel like I am, got to leave me bench by 2pm, or I start to cook. Rain tomorrow, maybe, so hopefully it’ll be cooler. It’s an interesting build, might be looking for other merchant ships. Jon 1 Link to comment Share on other sites More sharing options...
Faraway Posted July 25, 2021 Author Share Posted July 25, 2021 (edited) Good afternoon. Bit cooler today. First a comparison between the kit 20mm Oerlikon (on the right ) and the Black Cat Models 3D printed offering, you've got love 3D printing. And now the bridge is very nearly done, just two more lifeboats and that is that, although I do dislike closeup photos, don't they just show all the shoddy work ? Edited July 25, 2021 by Faraway 9 Link to comment Share on other sites More sharing options...
Faraway Posted July 27, 2021 Author Share Posted July 27, 2021 I thought I'd dry fit the superstructure, looking quite good. Made a start on the gun decks, this is the forward 3" A partial build of the aft gun deck. 8 Link to comment Share on other sites More sharing options...
S-boat 55 Posted July 27, 2021 Share Posted July 27, 2021 As they'd say in Wales...Tidy 2 Link to comment Share on other sites More sharing options...
Adm Lord De Univers Posted July 27, 2021 Share Posted July 27, 2021 1 hour ago, S-boat 55 said: As they'd say in Wales...Tidy Agreed, very lush. 1 2 Link to comment Share on other sites More sharing options...
Faraway Posted July 27, 2021 Author Share Posted July 27, 2021 I’ve mulling over weathering, as you do, rust shouldn’t be a problem. But I’m thinking of adding an algae stain to the water line, only I don’t know how. I’d be grateful for any tips in how to achieve this. Jon Link to comment Share on other sites More sharing options...
ArnoldAmbrose Posted July 28, 2021 Share Posted July 28, 2021 6 hours ago, Faraway said: But I’m thinking of adding an algae stain to the water line, only I don’t know how. I’d be grateful for any tips in how to achieve this. Gidday Jon, I guess actually floating the model in an outdoor fish pond for three months isn't an option? 😁 Actually, my son said to consider it seriously. 🤔 Or alcohol based dye poured on top of the water then immerse up to the waterline. These are just thoughts, we haven't done it ourselves so try it on scrap first. But you're right in your earlier post, with the superstructure dry fitted she does look good. And will be even better with the gun pits painted. Regards, Jeff. 2 Link to comment Share on other sites More sharing options...
Faraway Posted July 28, 2021 Author Share Posted July 28, 2021 Greetings from a wet and windy west country. Fore, 3" gun and aft, 5" gun and two 20mm Oerlikons, gun decks finished and fitted to the deck. I'm glad I bought the BlackCat Models 3D guns, they are far better than the kit parts, and compliment the PE nicely. Things are going to get fiddly soon, as I've got to attach the derricks to the king posts and then rig with cables. Anyway, here is todays progress. Jon 10 Link to comment Share on other sites More sharing options...
Nick C Posted July 28, 2021 Share Posted July 28, 2021 On 7/27/2021 at 10:24 PM, Faraway said: I’ve mulling over weathering, as you do, rust shouldn’t be a problem. But I’m thinking of adding an algae stain to the water line, only I don’t know how. I’d be grateful for any tips in how to achieve this. Jon Looks great John. I did algae on a waterline by masking the line and very gently dabbing green oil paint with a kitchen washing up sponge. The oil takes ages to dry tho. I’ll post a pic when I get home at the weekend. 2 Link to comment Share on other sites More sharing options...
Chewbacca Posted July 30, 2021 Share Posted July 30, 2021 On 27/07/2021 at 22:24, Faraway said: I’ve mulling over weathering, as you do, rust shouldn’t be a problem. But I’m thinking of adding an algae stain to the water line, only I don’t know how. I’d be grateful for any tips in how to achieve this. Jon Two thoughts come to mind on the waterline marine growth. Firstly, would there have been that much? My experience of marine algae is that it usually only forms when the vessel is stationary, and these vessels were worked hard with minimal time at anchor/alongside, so would there have been that much? Our view is always skewed because we see vessels late in their lives that are laid up. So I guess it's a case of whatever you decide to do, less is probably more in this instance. And secondly, how do you plan to display the model? I know that this is a very personal thing, but I've never quite understood weathering on a model on a stand/plinth. In a seascape setting, absolutely yes, but putting it onto a stand, to me at least, turns it more into a shipbuilder's model and they are always pristine. But I do totally recognise that every modeller is different and a lot do like weathering on models on stands. 3 Link to comment Share on other sites More sharing options...
Faraway Posted July 30, 2021 Author Share Posted July 30, 2021 23 minutes ago, Chewbacca said: Two thoughts come to mind on the waterline marine growth. Firstly, would there have been that much? My experience of marine algae is that it usually only forms when the vessel is stationary, and these vessels were worked hard with minimal time at anchor/alongside, so would there have been that much? Our view is always skewed because we see vessels late in their lives that are laid up. So I guess it's a case of whatever you decide to do, less is probably more in this instance. And secondly, how do you plan to display the model? I know that this is a very personal thing, but I've never quite understood weathering on a model on a stand/plinth. In a seascape setting, absolutely yes, but putting it onto a stand, to me at least, turns it more into a shipbuilder's model and they are always pristine. But I do totally recognise that every modeller is different and a lot do like weathering on models on stands. You make some valid points, given how busy this ship would have been, I think your point of little algae is one I had not considered. She will be on a base, so I think I’ll just add a bit of random rust and leave it at that. Jon 2 Link to comment Share on other sites More sharing options...
Faraway Posted July 31, 2021 Author Share Posted July 31, 2021 (edited) Slow progress, but things are coming on nicely. King Posts have had their "guy ropes" fitted. Once more I'm in debt to @Bobs_Buckles https://www.bobsbuckles.co.uk/ I have no idea how I'd get some of the rigging done without them. All in all things are ticking over nicely Next I've added the derricks (?) and rigged those, I'm keeping the wires fairly simple and within my skill range, I do sometimes have a tendency to try to run before I can walk. So, just waiting for the glue to dry on these derricks, before I rig those. Now, You'll recall what I said about running before I can walk ? Well I've been and bought this kit........ There is another version, with a full length flight deck, so, who knows what might follow this ? I do seem to have a a strange habit of gravitating towards the sort of unusual. Nothing too difficult here you might think, but I can't just buy a model, oh no, I have to add PE etc. So, instead of using the kit parts for the girder supports of the flight deck. I've gone and bought these ! Will I never learn.............? I might have to be certified slightly insane, before I start this project. Probably try something a bit simpler first. I've got this feeling, the soldering iron is going to be busy. It has got to be the tidier way of assembling them. Jon Edited July 31, 2021 by Faraway 4 Link to comment Share on other sites More sharing options...
ArnoldAmbrose Posted July 31, 2021 Share Posted July 31, 2021 42 minutes ago, Faraway said: I might have to be certified slightly insane, Gidday Jon, you mean you're not already? I thought that was a pre-requisite for modeling so it's probably just a formality. 😀 If you do manage all those girders it'll improve the model enormously I think. Good luck with it. Those king posts with their booms and rigging are looking very good, they're almost models in their own right. Regards, Jeff. 1 Link to comment Share on other sites More sharing options...
Faraway Posted July 31, 2021 Author Share Posted July 31, 2021 9 minutes ago, ArnoldAmbrose said: almost models in their own right Jeff. I think that’s why I’ve become hooked on making ship models, there are so many elements to them. I’ve seen pictures of the Langley with the PE frame work and it looked amazing, sort of looking forward to the challenge. Jon 1 Link to comment Share on other sites More sharing options...
robgizlu Posted August 2, 2021 Share Posted August 2, 2021 Great looking model - loving the rigging and all of the detail. Looking forwards to Langley Rob 1 Link to comment Share on other sites More sharing options...
S-boat 55 Posted August 2, 2021 Share Posted August 2, 2021 I'm.also looking forward to those girders, they'll look impressive for sure, 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now