Meng Glass File (Long MTS-048a Short MTS-048b)

[Mike]

Glass File (Long MTS-048a Short MTS-048b)

Meng Model via Creative Models Ltd

 

 

Meng have a growing range of tools thanks to their collaboration with high quality tools expert DSPIAE.  These new files arrive in a card box with a header hanger, and inside you will find a flexible plastic box that protects the tempered glass file within.  The box is printed with instructions, which advise you to avoid dropping the files, or storing them outside their packet – all common sense if you’ve ever experienced the explosive disassembly of a piece of tempered glass before.

 

 

The recent concept of etching an abrasive pattern onto glass files has been around in the nail salon world for a while now, but they have been rustic, insofar as the pattern is random to cut in every direction.  The engineers behind this more technologically advanced variant on the theme have etched a unidirectional “tread” onto tempered glass that will give an incredibly accurate result on an unerringly flat surface.  The files have a mirrored finish on their abrasive side, with the logo in negative and again in positive on the opposite side.  The short version has abrasive etched along its full-length of 90mm, across the 12.7mm width, while the long version has an average of 67mm of abrasive (it’s cut at an angle), with a total length of 110mm, and the same width as the shorter version.

 

 

Apologies if looking at this photo makes your eyes go "gozzy". It really affected mine in a quite unpleasant manner, so you've been warned.  No staring!

 

 

In use they are strange when initially rubbed against plastic, but the result is shiny thanks to the fine abrasive.  This doesn’t affect the speed at which the material is abraded away however, but you have to be careful not to dig one edge of the file into the surface, as this can result in a groove.  With a little practice, flat, smooth surfaces can be obtained, thanks in part to the inflexibility of the file, unlike those rounded-off surfaces that can plague users of files with soft, flexible surfaces.  The fact that these files produce such a smooth result also saves time, and to illustrate that, I have just taken a few seconds to remove a large blocky sprue gate with the file very quickly and to the exact height of the surrounding plastic, leaving no residual work left to do.  When using it to remove material, you will notice that small shavings are thrown out of the path of the file, as the tiny shapes are performing a task somewhat akin to a wood plane, only on a minute scale.  The phrase "nano-technology" is used on the outer box, so it must be modern!

 

The instructions also advise not to use the files on anything harder than plastic, as it will damage the nano-blades on the surface, and shorten the life of the tool, possibly also ruining the smoothness of the results into the bargain.  It’s best not to find out, so store them in their boxes and use them as advised on the out box.

 

 

Conclusion

A highly useful tool that will become a part of your toolkit to see frequent action in your modelling time.  You might not use it daily, but when you do, you’ll be glad you have it.

 

Highly recommended.

 

Currently out of stock with Creative due to popularity, but keep checking back for new stock.

 

Long (MTS-048a)

 

Short (MTS-048b)

 

Review sample courtesy of

[Julien]

 

 

[Anthony Kesterton]

Glass files seem to be a thing in the nail industry too - how do these items compare to these Meng/DSPIAE versions?