corsaircorp Posted August 20, 2023 Share Posted August 20, 2023 Hello Chris, Whick kind of windscreen are you looking for ?? I maybe have the right one in my spare box... do not hesitate Man, if I can help a Seafire, that sound great Sincerely. CC 3 Link to comment Share on other sites More sharing options...
bigbadbadge Posted August 20, 2023 Author Share Posted August 20, 2023 44 minutes ago, 2996 Victor said: Hi Chris, Just catching up here - great save on the oil cooler, and fingers crossed for the replacement windscreen. I'm guessing the Eduard windscreen isn't a good match? Hope the mojo is recovering, mate, and thanks again for all your help with the Seversky S-2! Looking forward to your next update. All the best, Mark Thanks Mark, I think I was a bit tired last night, fortunately I stopped messing with the vacform windscreen as I thought I had ruined it , luckily I hadn't and have just finished tidying it up and am pleased to say it fits, really pleased as I have put a lot into this one what with all the bits missing etc . No worries re the S2, looking forward to seeing that develope. 27 minutes ago, corsaircorp said: Hello Chris, Whick kind of windscreen are you looking for ?? I maybe have the right one in my spare box... do not hesitate Man, if I can help a Seafire, that sound great Sincerely. CC Thanks CC, that is very kind of you too and much appreciated too. I am okay now though as have successfully cleaned up the windscreen now so will get the sight in and get the windscreen in place , the old Mojo will rejuvenate now. Thanks guys Chris 4 Link to comment Share on other sites More sharing options...
2996 Victor Posted August 20, 2023 Share Posted August 20, 2023 16 minutes ago, bigbadbadge said: the old Mojo will rejuvenate now. 👍 3 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted August 22, 2023 Author Share Posted August 22, 2023 Hi all A bit more progress, the windscreen fettled and added and so build in back on, phew. Oil cooler on and some rescrbing done, I can start on the Seafire bits now. I have missed the internal frame on the top ofcthe rear canopy section, don't tell anyone😉 The Nirod has had all the fuselage joints filled and had a base coat to check and all looked good. The spine has had a thin strip of plasticard strut glued and have been filling either side of ot with PPP. I have given it a link of paint to see what it is looking like, quite pleased withcthat so far, very nearly there. Thanks for looking Chris 15 Link to comment Share on other sites More sharing options...
2996 Victor Posted August 23, 2023 Share Posted August 23, 2023 Great to see the Seafire back on track, mate and the Nimrod just keeps getting better and better! Cheers, Mark 1 1 Link to comment Share on other sites More sharing options...
Dunny Posted August 23, 2023 Share Posted August 23, 2023 Chris, Great to see the Seafire back on track and nice work on the Nimrod! Cheers, Roger 1 1 Link to comment Share on other sites More sharing options...
AliGauld Posted August 23, 2023 Share Posted August 23, 2023 Nice save with the windscreen and it's all looking brilliant. The Nimrod is splendid as well. Cheers, Alistair 1 1 Link to comment Share on other sites More sharing options...
RichieW Posted August 23, 2023 Share Posted August 23, 2023 Great stuff Chris, the windscreen save looks perfect. I like your method of filling the Nimrod spine. It looks pristine. The modelling machine rolls on! Richie 1 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted August 23, 2023 Author Share Posted August 23, 2023 3 hours ago, 2996 Victor said: Great to see the Seafire back on track, mate and the Nimrod just keeps getting better and better! Cheers, Mark 2 hours ago, Dunny said: Chris, Great to see the Seafire back on track and nice work on the Nimrod! Cheers, Roger 8 minutes ago, AliGauld said: Nice save with the windscreen and it's all looking brilliant. The Nimrod is splendid as well. Cheers, Alistair 1 minute ago, RichieW said: Great stuff Chris, the windscreen save looks perfect. I like your method of filling the Nimrod spine. It looks pristine. The modelling machine rolls on! Richie Thanks Mark, Roger, Alistair and Richie, please forgive me for answering all of you together instead of individually . I am really pleased that the Seafire is back on track and just now need to Navalise it and add the lumps and bumps to the wings , so time to decide which of the machines I am modelling . Got a further 3 Seafire III kits to do so have a few to choose between. The Nimrod is starting to look good , just need to fettle the spine a bit more and then can start adding the PE bits and the hook etc then look at starting on the tail feathers and wings . Thanks for your support and encouragement . Chris 3 Link to comment Share on other sites More sharing options...
TheBaron Posted August 23, 2023 Share Posted August 23, 2023 You've got it well under control Chris - lovely progress. 1 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted August 23, 2023 Author Share Posted August 23, 2023 50 minutes ago, TheBaron said: You've got it well under control Chris - lovely progress. Thanks,Tony, very kind fella. Looking forward to getting the Nimrod moved along , will be chuffed to have one in the display. Chris 2 Link to comment Share on other sites More sharing options...
keefr22 Posted August 23, 2023 Share Posted August 23, 2023 Nice work Chris, really liking the look of the Nimrod! Keith 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted August 23, 2023 Author Share Posted August 23, 2023 4 hours ago, keefr22 said: Nice work Chris, really liking the look of the Nimrod! Keith Thanks Keith, oh man, I can’t wait to see the Nimrod when done, wanted one for ages, was even going to go down the two Airfix Fury kit route, but this was released so treated myself. Chris 2 Link to comment Share on other sites More sharing options...
mark.au Posted August 24, 2023 Share Posted August 24, 2023 Happy to read about the save and definitely looking forward to your progress 👍 1 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted August 24, 2023 Author Share Posted August 24, 2023 10 hours ago, mark.au said: Happy to read about the save and definitely looking forward to your progress 👍 Thanks Mark, really pleased I managed to save the vacform windscreen, as I have form for ruining them 🙄 it certainly was a Mojo boost. Now I have finished the spine on the Nimrod too, I can start progressing that one too, can't wait to see this one built up. Chris 4 Link to comment Share on other sites More sharing options...
bigbadbadge Posted August 26, 2023 Author Share Posted August 26, 2023 Hi all Been concentrating on the Nimrod and actually really enjoying it now, although the undercarriage legs were initially playing up I figured out the best way to get them right. The radiator has been added and the Arrestor Hook and tailskid added, these were made up with the brass rod supplied with the kit. I couldn't resist another size comparison with the Piper J3 Flitfire Cub , the subject of my other current thread PE bits added along with head rest Getting there, tail feathers next and trying to figure out how I will tackle the wings 😬 Thanks for looking in Chris 13 Link to comment Share on other sites More sharing options...
AliGauld Posted August 27, 2023 Share Posted August 27, 2023 "Yes, Jamie, It is quite a big one." Looking excellent. The size difference is fairly spectacular. Cheers, Alistair 1 1 Link to comment Share on other sites More sharing options...
Johnson Posted August 27, 2023 Share Posted August 27, 2023 Bit of a catch up for me. Fantastic Seafire 1b! Spot on!!! Love the weathering, especially the wear on the wing root - just right. Great Corsair and the Nimrod coming along very well Chris - great cockpit. Cheers, 2 1 Link to comment Share on other sites More sharing options...
keefr22 Posted August 27, 2023 Share Posted August 27, 2023 That's coming along really well Chris! Keith 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted August 27, 2023 Author Share Posted August 27, 2023 9 hours ago, AliGauld said: "Yes, Jamie, It is quite a big one." Looking excellent. The size difference is fairly spectacular. Cheers, Alistair Thanks Alistair, it's quite an impressive size!!!😉 6 hours ago, Johnson said: Bit of a catch up for me. Fantastic Seafire 1b! Spot on!!! Love the weathering, especially the wear on the wing root - just right. Great Corsair and the Nimrod coming along very well Chris - great cockpit. Cheers, Thanks Charlie, very kind, pleased with those ones, hopefully the Seafire III will turn out okay and the Nimrod too, that is my first resin kit, I am enjoying it so far. 1 hour ago, keefr22 said: That's coming along really well Chris! Keith Thanks Keith, I wasn't able to put hhe Nimrod down . Trying to figure the wings soon 😬 Thanks guys Chris 4 Link to comment Share on other sites More sharing options...
RichieW Posted August 27, 2023 Share Posted August 27, 2023 Glad you're enjoying the Nimrod a lot more now. I didn't realise it was such a big model until you showed the picture with the Cub. Richie 1 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted August 27, 2023 Author Share Posted August 27, 2023 28 minutes ago, RichieW said: Glad you're enjoying the Nimrod a lot more now. I didn't realise it was such a big model until you showed the picture with the Cub. Richie Thanks Richie, yes definitely enjoying it now, although I am just trying to figure out the lower wing so will be a slight halt to proceedings 🙄 The cub is a 48th scale kit so not really a good comparison I suppose, but just to show the size is okay. It certainly is going to be a beastie. Chris 2 Link to comment Share on other sites More sharing options...
RichieW Posted August 27, 2023 Share Posted August 27, 2023 21 minutes ago, bigbadbadge said: I am just trying to figure out the lower wing so will be a slight halt to proceedings You'll figure it out, answers always come in the end. 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted August 27, 2023 Author Share Posted August 27, 2023 3 minutes ago, RichieW said: You'll figure it out, answers always come in the end. Fingers crossed, thanks Richie, I have reached out to Glijn who built one previously as to his solution for the Rod that goes behind the main join for yhe wings as not quite sure whether to lop it to size or bend it to match Dihedral 🤔 Chris 2 Link to comment Share on other sites More sharing options...
Dunny Posted August 28, 2023 Share Posted August 28, 2023 Chris, Nimrod is shaping up nicely - a big bird though! Cheers Roger 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now