bigbadbadge Posted May 22, 2022 Author Share Posted May 22, 2022 2 hours ago, keefr22 said: Snap! Although I think I need at least another 3 to 400 years at my build rate...!! We're thinking of 'downsizing' in the next few years so I've spent the morning re-arranging the stash to try and get everything in my model room. And failed miserably....!! So if you do see another Smer Tiggie, please don't say anything! 🤣 K 😄 No worries Keith , it's very hard to think what to let go, got a lot of mine in but still loads upstairs on in and around the wardrobe, I will be reducing the stash a bit soon too!!! Chris 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted May 28, 2022 Author Share Posted May 28, 2022 Hi all Bit more progress on the Sea Venom , I have done enough sanding now, rudders added and elevator actuators added some more work behind the cockpit U/c bays getting paint so I can get it onto its legs Work has occurred on yhe Tiggie too, PE additions added to side walls, had to add the mounting plates for the auto flap control selectors on the Stbd side from plasticard. The knobs for these , throttles and the control stick load trim levers on the Port side were made using PVA glue Painted Seatbelts added the slot in yhe front seat is for yhe Control stick load trim levers to be joined, the leather patch is for the throttle lever and Altitude mix levers to be joined. I have not added scratched altitude mix levers as they are tiny Thanks for looking Chris 12 Link to comment Share on other sites More sharing options...
mark.au Posted May 28, 2022 Share Posted May 28, 2022 All coming along nicely Chris. The Sea Venom looks like a airplane now, and will be mightily impressive once you start your paintbrush magic. 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted May 29, 2022 Author Share Posted May 29, 2022 7 hours ago, mark.au said: All coming along nicely Chris. The Sea Venom looks like a airplane now, and will be mightily impressive once you start your paintbrush magic. Thanks Mark, I must admit getting quite excited about getting some paint on , still got a few small jobs left now. Thanks Chris Link to comment Share on other sites More sharing options...
AliGauld Posted May 29, 2022 Share Posted May 29, 2022 The Tiggie is coming together nicely and I'm really looking forward to the Sea Venom. It's looking splendid without paint. Cheers, Alistair 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted May 29, 2022 Author Share Posted May 29, 2022 3 hours ago, AliGauld said: The Tiggie is coming together nicely and I'm really looking forward to the Sea Venom. It's looking splendid without paint. Cheers, Alistair Thanks Alistair, pleased with the Tiggie, the IPs look very nice too, and hopefully when it all goes together it should look great . I must admit I am so looking forward to getting some paint on the Sea Venom finally. No modelling today for me though, been to a play tonight and today I have been looking at cars for my son as he wants a project car for us to get ready for when he starts driving later this year. Offered him a more modern car but he wanted a Mk1 Polo Breadvan so managed to locate a decent one finally today after being gazumped on previous finds. Thanks fella Chris 2 Link to comment Share on other sites More sharing options...
Dunny Posted May 30, 2022 Share Posted May 30, 2022 Chris, That cockpit rear deck looks lovely under a coat of paint! Nice work on the Tiggie cockpit too, Cheers, Roger 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted May 30, 2022 Author Share Posted May 30, 2022 3 hours ago, Dunny said: Chris, That cockpit rear deck looks lovely under a coat of paint! Nice work on the Tiggie cockpit too, Cheers, Roger Thanks Roger, I am pleased with it, just got to add a tonne of wiring and some little Greeblies and the glazing can be added. Jut the cartridge shell ejector shutes and bits and bobs and the underside paint can be added. Pleased with ghe Tiggie cockpit too, that will really come to life in the next few days hopefully. Thanks fella Chris 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted June 2, 2022 Author Share Posted June 2, 2022 Hi A bit more progress on both the Sea Venom and Tigermoth. More bits added to behind the cockpit and some painting has occurred A trial fit of the canopy glazing Tiggie cockpit has come on with the seats and floor added, the two grottoes and altitude mixture lever rods are in and the stick tensioning lever connecting rod is in below these just need painting and the IPs adding IPs using the pre painted PE, which just leaves the compass sides and mounts to paint . Thanks for looking in Chris 10 Link to comment Share on other sites More sharing options...
AliGauld Posted June 2, 2022 Share Posted June 2, 2022 That's all looking braw. A Walrus and a Stringbag coming up. yeehah. I do hope you enjoy rigging. Cheers, Aliatair 1 Link to comment Share on other sites More sharing options...
mark.au Posted June 2, 2022 Share Posted June 2, 2022 The canopy on the Sea Venom doesn't look like it's going to be too bad there, Chris. The TM cockpit looks very nice, coming along well on that one. 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted June 2, 2022 Author Share Posted June 2, 2022 2 hours ago, AliGauld said: That's all looking braw. A Walrus and a Stringbag coming up. yeehah. I do hope you enjoy rigging. Cheers, Aliatair Thanks Alistair, can't wait to get the little bits finished in the cockpit later and then it will fuselage joining time. I do actually love rigging, it's very therapeutic and love watching it develope, I have a 72nd Felixstowe in the stash too, I am a masochist 😉 I have even ordered the Revell, ex ICM 32nd Tigermoth, already done a Matchbox one with lots of scratch work do will see what the newer kit is like. 1 hour ago, mark.au said: The canopy on the Sea Venom doesn't look like it's going to be too bad there, Chris. The TM cockpit looks very nice, coming along well on that one. Thanks Mark yes it sits on quite well and fits really well with some light pressure. I will get the Mike's of wiring done over the next few nights so shouldn't be long before canopy goes on. Pleased with the Tiggie cockpit and should hopefully get that joined tonight. Thanks guys Chris Link to comment Share on other sites More sharing options...
AliGauld Posted June 2, 2022 Share Posted June 2, 2022 (edited) 1 hour ago, bigbadbadge said: I do actually love rigging, it's very therapeutic and love watching it develop I always thought there was something strange about you. 1 hour ago, bigbadbadge said: I have a 72nd Felixstowe in the stash too Yes, somebody tempted and persuaded me into one of those too. Can't think who right now but it'll come to me. Cheers, Alistair Edited June 2, 2022 by AliGauld 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted June 2, 2022 Author Share Posted June 2, 2022 3 hours ago, AliGauld said: I always thought there was something strange about you. Yes, somebody tempted and persuaded me into one of those too. Can't think who right now but it'll come to me. Cheers, Alistair Definitely strange and sorry if it was me 1 Link to comment Share on other sites More sharing options...
Terry1954 Posted June 2, 2022 Share Posted June 2, 2022 Great progress Chris, and I seriously love those Tiger Moth IP's! Terry 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted June 2, 2022 Author Share Posted June 2, 2022 15 minutes ago, Terry1954 said: Great progress Chris, and I seriously love those Tiger Moth IP's! Terry Thanks Terry, really pleased with the Tiggie, those IPs are very nice. Hopefully it will all be stuck together later. Thanks Chris Link to comment Share on other sites More sharing options...
bigbadbadge Posted June 2, 2022 Author Share Posted June 2, 2022 Hi the IPs are in the rods painted and the sticks are in. Fuselage halves joined together now. Thanks for looking. Chris 10 Link to comment Share on other sites More sharing options...
AdrianMF Posted June 2, 2022 Share Posted June 2, 2022 That cockpit looks ready to sit in! Regards, Adrian 2 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted June 2, 2022 Author Share Posted June 2, 2022 52 minutes ago, AdrianMF said: That cockpit looks ready to sit in! Regards, Adrian 😄 Thanks Adrian, quite pleased with it. Chris 1 Link to comment Share on other sites More sharing options...
AliGauld Posted June 3, 2022 Share Posted June 3, 2022 I agree, it looks ready for occupancy. You should be very pleased. Cheers, Alistair 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted June 3, 2022 Author Share Posted June 3, 2022 1 hour ago, AliGauld said: I agree, it looks ready for occupancy. You should be very pleased. Cheers, Alistair 😄 Thanks Alistair, I just need a miniature Bernard Cribbins now to come along and jump in, like he did in the Hornby adverts in the 1980s😉 Chris 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted June 3, 2022 Author Share Posted June 3, 2022 Hi I have had a go at the canning effects on the very battered upper nose/cowling on XL717 in July 1962 in Scotland, the nose panel as moulded has quite a step above the top of the fuselage so I have pared away some of each part that join to make them level, as well as removing the top of the engine too. I used a rotary tool and dental bur to create the oil canning. The slight raised bit is the footplate on top to stop the panel getting damaged whilst the person is filling up the fuel etc Port side of nose, chin panel and nose, holes drilled for elevator rigging and the kit horizontal tail plane used and deflected. Vertical tail surface added, note correct gap between base of tail and top of horizontal elevator surface CmK resin fuel tank upper in place I have cut the joint piece at the top of each of the wing struts sets. This is glued into its slot on the underside of the upper wing, the struts still locate fine Sprue goo to fill as if left it will be very visible Thanks for looking in Chris 8 Link to comment Share on other sites More sharing options...
AdrianMF Posted June 3, 2022 Share Posted June 3, 2022 The oil canning looks great! Not overdone. Perfect - I can just see someone mis-stepping when getting up to fill the fuel tank. It’s funny (peculiar, not haha) that they have reverted to connected struts in the 1/48 kit. Regards, Adrian 1 Link to comment Share on other sites More sharing options...
mark.au Posted June 4, 2022 Share Posted June 4, 2022 Coming along Chris, looking like a an aeroplane now. The canning looks spot on too. 1 Link to comment Share on other sites More sharing options...
Dunny Posted June 4, 2022 Share Posted June 4, 2022 Both cockpits are looking superb Chris, and some exciting news on the new builds! Cheers, Roger 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now