hendie Posted May 2, 2021 Share Posted May 2, 2021 As a diversion from my Classic Airframes induced purgatory that is my Vampire build, I looked around the stash and saw this calling to me. Actually, I pulled out a Spitfire XIVe and stared at it for about 20 minutes and could not build up any enthusiasm, so pulled this out instead, and you know? There was something captivating about it. It's a highly detailed, well engineered, state of the art, shake and bake kit of a Westland Whirlwind HAR 10 I lied. At best, it's basic and to be honest, rather crude. Lots of flash, bits that don't fit very well and bits that don't look like what they are supposed to look like. ... Wait a mo', isn't that the Classic Airfames Vampire I'm describing? It could be, but it's not. This is an old kit, and has such lovely rivet detail that it makes the Frog Shackleton look almost sleek by comparison. Don't believe me? here then... To be honest I actually like some of that detail that's scattered about the airframe. Some of it is nicely done. Most of it will be lost to the sanding fest that has become my life recently Like I said, this kit is old. I'm not sure if that says "Revell 1955" or "Revell, 1055". Either way, this kit is older than me As you can see, there is an issue or two to be addressed in this build but I love how they've gone for scale thickness of the skin. Spacious if sparse interior Highly detailed parts that just drop together A couple of nice Parker Knolls instrument panel that thumbs its nose at todays standards and that's the interior. Yup, the entire interior! From start to finish. There'll be none o' this but we all know it's in there nonsense in this build Actually there will. The interior is so basic that I'm only using the parts as templates to scratch my own. Lots of fettling to be done here Slice, dice, and furiously fettle about an hour of making plastic dust later we have the gearbox housing - what? of course there's no gearbox! It fits I tell you! It fits! There's something about these old kits that I like. You know what you're dealing with here. There's no pretense at being new mold or new tooling... even the picture on the box tells you that you just know it's going to be a bit horrific in there once you open it up. I thoroughly enjoyed building the old Hawk Lysander - very much a blank canvas that you can tart up as much or as little as you like. It's also a nice challenge to see if you can make something worthwhile out of such a basic kit - and it's so basic that almost anything you can do to it makes it look a bit better. Somehow I'm going to have to build a cabin in here - after I shave off all those carbuncles on the inside Did I mention the windows? Maybe not. Probably shouldn't, but here we go anyway. This is a kit "transparency" (term used loosely) Which raises the question ... why? I'm sure back in 1055 or whenever it was, kids were absolutely raving about this kit. I guess the designers looked at this first transparency and thought sod it! They didn't bother with the rest. There's a windscreen, and these. No cabin windows at all. None. I see vacforming in my future. What about those rivets though? As you can see in the shot above and this below... a little bit of sanding goes a long way. This was just a first bash at removing the rivet rash, and not too bad to be honest. More work needed obviously, but it wasn't too arduous. I know I'll never get rid of all the rivet detail, but the suggestion of a rivet, or line of rivets here and there may not be all that bad tbh. More carbuncle removal. I haven't figured out yet how I'm going to approach the interior. - Those "walls" are a bit cave-like. I could sheet them with styrene but I don't think I want to add any more thickness to the already fortress like walls By the end of play today I had the beginnings of an interior and the beginnings of an exterior. Despite it's rather agricultural appearance I am having fun with this kit. Well, I suppose an evening with De Sade would be fun after a Classic Airframes kit. Dysentery would be more fun than a CA kit I mentioned earlier that there will be a few modifications. What are they? Well, somehow I have to scratch build a full interior - bulkheads, seats, cockpit etc. Oh, and this is an H19 and I'm building a HAR10, so it needs a complete new nose with a Vokes (?) filter, and it needs an undercarriage, not to mention, a new tail. The tail boom also has to be cut off and reattached at an angle (3 degrees? or ???). I'm sure there are a few other changes required along the way too, but I'll deal with those as I get to them. 46 Link to comment Share on other sites More sharing options...
AMB Posted May 2, 2021 Share Posted May 2, 2021 Well I have complete confidence in your building skills that anything that served in Hong Kong will end up as a masterpiece. Actually, I have been after one of these kits for years - the Revell H-19 - never knew it was reboxed by Hobby! I believe it was the only 1/48th H-19 -cum-Whirlwind ever made and I am intrigued how you will make the HAR.10 nose, possibly from a block of balsawood? I shall be following this with greatest interest. 1 Link to comment Share on other sites More sharing options...
hendie Posted May 2, 2021 Author Share Posted May 2, 2021 22 minutes ago, AMB said: Actually, I have been after one of these kits for years - the Revell H-19 - never knew it was reboxed by Hobby! Revell released it again last year I believe. They should still be kicking around ebay. I think I paid less than 20 bucks for this one. Not quite sure how I'm going to do the nose yet. I'm trying to stick to scratchbuilding as much as I can for this one and keep 3d printing to a minimum. I've good ways to go before I get to the nose, so plenty of time to formulate a plan if attack 5 Link to comment Share on other sites More sharing options...
CedB Posted May 3, 2021 Share Posted May 3, 2021 Nice start hendie - I'm in! 1 Link to comment Share on other sites More sharing options...
Fritag Posted May 3, 2021 Share Posted May 3, 2021 moi aussi. ‘twill be enjoyable. This side of the Atlantic anyway 2 Link to comment Share on other sites More sharing options...
Hamden Posted May 3, 2021 Share Posted May 3, 2021 Another Hendie helicopter (re)build, looking forward to watching you work your magic on this one! Stay safe Roger 1 Link to comment Share on other sites More sharing options...
Pete in Lincs Posted May 3, 2021 Share Posted May 3, 2021 Here we go again! I'm along for the ride. Build me a loadie seat would you. please. This is another one that was always on my to do list, but...... I recently finished reading a book called Borneo Boys*. It follows the RAF out there and their Whirlwind operations in support of the defence forces. It also tells the tale of newly qualified RAF Helicopter pilots, aged on average around 22, who were posted straight out there. A reoccurring theme was, 'They're young so they'll learn fast (they had to!) and, if you don't tell them it's near impossible, they'll just do it. (They did). In the hot and high conditions the piston engined Whirlwinds and the early turbine ones were woefully undepowered. It wasn't until the HAR 10's arrived that they had something that worked properly. It was alluded to that the '10's' were built in the USA. Someone wrote that the build quality was better than the earlier Airframes. And that leads us back to this build, in the USA. See what I did there? It looks better sanded down, and don't forget the seat pans tilted, like the Wessex, for apparent cabin access (Ha Ha). The Parker Knolls have got to go (to a model museum display, how to get it so wrong?). I look forward to your struggles with trepidation and a large scotch in my hand for the scary bits. BTW, You didn't mention blades? *Highly recommended. IF you can find a copy. 3 Link to comment Share on other sites More sharing options...
RichieW Posted May 3, 2021 Share Posted May 3, 2021 This is going to be fun to watch, seeing all those massive carbuncles made me feel quite nostalgic! 1 Link to comment Share on other sites More sharing options...
perdu Posted May 3, 2021 Share Posted May 3, 2021 It has a certain rustic charm so of course you know I will be along, chivvying or otherwise encouraging Les. You know, Les Autres. After my love affaire with the Dragonfly the Whirlwind was the deep seated soul of my love for rotary magic. I recall being encouraged to climb aboard a HAR10 (why did I think has22, huh?) on the pan at Leconfield with the small bunch of ATC Cadets we were accompanying there for summer camp. "Look up here this is... That makes this... Oh hell will you all climb out this one is off on a shout...!" Exciting times which encouraged several of my 'lads' to join up in later life. So yes of course I am at the bar, I see we have peanuts already. Pint please Edward! 2 5 Link to comment Share on other sites More sharing options...
Biggles87 Posted May 3, 2021 Share Posted May 3, 2021 Looks a bit ‘ Lindberg-ish ‘ to me, especially the silver plastic. John 3 Link to comment Share on other sites More sharing options...
Graham T Posted May 3, 2021 Share Posted May 3, 2021 Had me going there! All excited about a nicely engineered & detailed 1/48 Whirlwind kit…….then I read on!😂 1 Link to comment Share on other sites More sharing options...
Martian Posted May 3, 2021 Share Posted May 3, 2021 13 hours ago, hendie said: Like I said, this kit is old. I'm not sure if that says "Revell 1955" or "Revell, 1055". Either way, this kit is older than me Older than you? Its even older than @general melchett! I converted this kit into a Whirlwind from HMS Protector back in 1988. If you treat it as a vacform that has been cut from its backing sheet, it doesn't seem so bad. I have another in the stash that I fancy doing as a Royal Canadian Navy bird. Will I never learn? Clearly not. Stupid of Mars 👽 1 11 Link to comment Share on other sites More sharing options...
JohnT Posted May 3, 2021 Share Posted May 3, 2021 Trying to be helpful and follow along this masterclass of silk pursing from a box of sows ears I did think that you could abandon the idea of a RAF bird and go for a Navy one explaining the thickness of the walls as armour against 5 inch navy shells I have the Revell version which lurks in the back of the stash daring me to be so stupid as to take it on. Stupid in my case - not having your skills set to fight it with. But everyday a school day so have desk and chair, sitting upright with chalk and slate and taking notes feverishly 3 Link to comment Share on other sites More sharing options...
bentwaters81tfw Posted May 3, 2021 Share Posted May 3, 2021 Hmmm.... I have 3 of these in the stash. Plans. 22 Sqn ASR, Ark Royal plane guard, and HMS Protector, when Mel* finally gets his decals sorted. Almost started the 22 sqn bird this year, but maybe later. This will be interesting. *Not going to happen as Mel's death has just been announced. 2 1 Link to comment Share on other sites More sharing options...
AdrianMF Posted May 3, 2021 Share Posted May 3, 2021 It looks very similar in some details to the Airfix S55 of 1956. I wonder if it served as "inspiration"? Regards, Adrian 1 Link to comment Share on other sites More sharing options...
shortCummins Posted May 3, 2021 Share Posted May 3, 2021 5 hours ago, Pete in Lincs said: I recently finished reading a book called Borneo Boys*. *Highly recommended. IF you can find a copy. you can get the book on Amazon... https://www.amazon.co.uk/Borneo-Boys-Helicopter-Indonesia-Confrontation-ebook/dp/B00HESTD36/ref=sr_1_1?keywords=Borneo+Boys&qid=1620045094&s=books&sr=1-1 2 Link to comment Share on other sites More sharing options...
matti64 Posted May 3, 2021 Share Posted May 3, 2021 An excellent start. A Revell H-19/HO-4S, S-55 Whirlwind(yes they did a Whirlwind Issue) is always something to get excited about. 2 Link to comment Share on other sites More sharing options...
Lord Riot Posted May 3, 2021 Share Posted May 3, 2021 A 1/48 Whirlwind! I didn’t know such a thing existed. If only it was a HAR10 I’d try to find one immediately. As it is I’ll enjoy watching this build and hope that one day Airfix or Hasegawa decide that there is a glaring lack of 1970s/80s RAF helicopters in their catalogue. Great start on the kit. 3 Link to comment Share on other sites More sharing options...
The Spadgent Posted May 3, 2021 Share Posted May 3, 2021 And I thought you were going for something modern. Pfft. Sucker for punishment this one. 😮. Seems like you’re having fun Mind soo I’ll shut me chops. 🤗 I have an old 1/72 Airfix one of these. She is also covered from head to toe in bibbles. Always the same with bibbles. Either ridding you have em or adding if you don’t. Great start dear boy. I’ll pull up a stool of course. 😇 Johnny 2 Link to comment Share on other sites More sharing options...
Pete in Lincs Posted May 3, 2021 Share Posted May 3, 2021 7 hours ago, shortCummins said: you can get the book on Amazon... Good spot! Well worth it. I forgot to mention, when their Borneo tours were over, some of the pilots & groundcrew went over to Kai Tak. I think at least one senior type went to 28 Sqn. The book is about ten years old. Back then, at least two of those junior pilots were somewhat older & running the RAF Helicopter sims! And, BTW, our very own @bootneck was there being ferried around to do jungle border patrols with 40 Commando. Respect! 2 Link to comment Share on other sites More sharing options...
Space Ranger Posted May 3, 2021 Share Posted May 3, 2021 (edited) "Revell 1955" it is. Armed with a tube of Revell's "Type 'S'" cement, I built the float version in one afternoon. I had received it for my 9th birthday in September 1955. It's still one of my favorite kits from that era, and can built into a fine model. Edited May 4, 2021 by Space Ranger 5 Link to comment Share on other sites More sharing options...
Shorty84 Posted May 3, 2021 Share Posted May 3, 2021 (edited) Hi hendie, glad I've found your WIP as I have the same kit in my stash (the Arctic HO4S-1 boxing), moulded in lovely, garish red Actually, I really like the surface detail on the kit. While the rivets could be finer, one can see that the designers put a lot of work into it to create realistic details like overlapping joints. In fact, I think the surface details are more realistic than many more recent helicopter kits. The only challenge will be to preserve them when filling is required. My plan is to build a Yugoslav machine (HAR.5 variant) so I will follow your improvements with vital interest. Will you recreate the angled tail boom? I have thought long about that but decided to "cheat" and call it good as this would have meant to destroy all those lovely surface details. Drives the AMS part of me crazy but this time I will ignore to the voices in my head Cheers Markus Edited May 3, 2021 by Shorty84 3 Link to comment Share on other sites More sharing options...
giemme Posted May 4, 2021 Share Posted May 4, 2021 There you are, @hendie. You know you are helpless, right? Tagging along.... Ciao 1 1 Link to comment Share on other sites More sharing options...
TheBaron Posted May 4, 2021 Share Posted May 4, 2021 I give this another 36 hours tops before the brass tubing makes a showing. 19 hours ago, Martian said: . I have another in the stash that I fancy doing as a Royal Canadian Navy bird. Will I never learn? Clearly not. If the Martian's going to cross-dress to build his one, you could frankly make a bit more of yourself here Alan. Reap the whirlwind etc., etc.... 7 Link to comment Share on other sites More sharing options...
Max Headroom Posted May 4, 2021 Share Posted May 4, 2021 I’m in! You do like punishing yourself with these kits. Just think of it as a learning experience. Trevor 1 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now