Model Mate Posted April 6, 2021 Share Posted April 6, 2021 After a not so brief sojourn in the lands of hairy planes and scratchbuilt figures, I’m back on track with tanky stuff. I plucked this lovely miniart M3 Lee (interior) off the shelf off doom and blew the dust off it. It’s a simply superb kit – if anything too good – it’s caused me much procrastination as I try to figure out the best way to build it. For each sub-assembly I’ve had to constantly question; Paint first? Fit first? So a bank holiday weekend allowed me to catch up a bit. Here’s where the interior stands: The engine is a jewel – it’s a real shame to lock it away in the bodywork. …but I did of course! Deviating from the instructions a bit, I glued (most) of the upper superstructure together to fit in one piece after internal painting. I also got the bogies together and fitted. If I were to complain about this kit at all, it would be to point out that many of the more fragile parts are just that – extremely fragile, and best replaced with more substantial/rigid bits of wire and rod etc. See you next time! 20 1 1 Link to comment Share on other sites More sharing options...
vytautas Posted April 6, 2021 Share Posted April 6, 2021 Looks fantastically good, engine like real! It will be very interesting to watch your build. Do you use hairspray for chipping or paint it? Vytautas Link to comment Share on other sites More sharing options...
Model Mate Posted April 6, 2021 Author Share Posted April 6, 2021 Thanks Vytautas - that's high praise coming from you - I'm very impressed with your work. No hairspray so far on this one - chipping is all sponge applied grey acrylics followed by oil washes. 1 Link to comment Share on other sites More sharing options...
edjbartos Posted April 6, 2021 Share Posted April 6, 2021 Looking nice so far, would like to follow this as this is my next project after I have built their T34/85 Egyptian. I agree Miniart parts are very fragile as the parts are generally made from quite soft plastic. What you have done so far is looking really good... Ed Link to comment Share on other sites More sharing options...
Model Mate Posted April 6, 2021 Author Share Posted April 6, 2021 It's a lovely kit - looking forward to what you do with it. Your T34 is a work of art. 1 Link to comment Share on other sites More sharing options...
vaoinas Posted April 7, 2021 Share Posted April 7, 2021 Looking very good. Interior looks quite busy there. I would suggest oils spills and grease to the engine compartment though. Makes it more lively. Kristjan Link to comment Share on other sites More sharing options...
Model Mate Posted April 7, 2021 Author Share Posted April 7, 2021 good call - it is fairly clean at the moment! Link to comment Share on other sites More sharing options...
Patrykd Posted April 8, 2021 Share Posted April 8, 2021 I think that scratches are overdone. All surfaces couldent be scratched. This is impossible and dosn't look real Link to comment Share on other sites More sharing options...
Model Mate Posted April 8, 2021 Author Share Posted April 8, 2021 well it's true that not everything would be likely to be scratched up, but once the rest of the bodywork is in place, only a bit of it will be visible through the hatches. 1 Link to comment Share on other sites More sharing options...
echen Posted April 8, 2021 Share Posted April 8, 2021 Conversely, if you're trying to manoeuvre a heavy aero engine into place in awkward conditions in the field might it not swing and rock about on the way to mating up with the transmission? If the maintenance team was in a hurry I'm sure it would be banging about and tools would be dropped left right and centre, not improving the paintwork at all. Link to comment Share on other sites More sharing options...
vytautas Posted April 8, 2021 Share Posted April 8, 2021 (edited) 1 hour ago, Patrykd said: I think that scratches are overdone. All surfaces couldent be scratched. This is impossible and dosn't look real Yes, you are absolutely right. But how beautiful and interesting it looks! In a real-world, of course, a tank does not look that way, but here’s another world, this one specifically belongs to @Model Mate, and in his world, all the tanks, or maybe just this one, are terribly scratched, stained, and dirty. I not everything like in his tank world ( @vaoinas thinks it is a lack of grease and oil, and I second him), but overall this world looks interesting, colorful, and fine (but God forbid to live in it! ) Vytautas Edited April 8, 2021 by vytautas 7 Link to comment Share on other sites More sharing options...
Pig of the Week Posted April 8, 2021 Share Posted April 8, 2021 I see the relevance of both points of view ! ..but certainly machinery that I've wrangled with in real life has got fairly battered as Echen says.. ( tho where's the oily handprints ? ) also it's a model and certain artistic licence (or even theatrical exaggeration) is essential to convey the impression, otherwise a small model is just a green ( or whatever colour) lump of plastic ! I think he's done a great job so far anyway. 1 Link to comment Share on other sites More sharing options...
robw_uk Posted April 8, 2021 Share Posted April 8, 2021 gorgeous work... once I have a few other interior kits done I would love to give this a shot Link to comment Share on other sites More sharing options...
Model Mate Posted April 8, 2021 Author Share Posted April 8, 2021 Thanks Rob. Yes, it's a lovely kit - probably the best I've tried, though kits do force you up to a set detail level and I've suffered a fair bit of procrastination on this one trying to reach the expectations the kit demands. I'm now itching to get another scratchbuild underway; one where I can dictate the level of detail! Link to comment Share on other sites More sharing options...
Tcoat Posted April 8, 2021 Share Posted April 8, 2021 Beautiful! I have picked this kit up off the local shop shelf and put it back down about 10 times now. Now that I have seen this the next time it comes home. 1 Link to comment Share on other sites More sharing options...
f matthews Posted April 9, 2021 Share Posted April 9, 2021 (edited) The Miniart Lee and Grant kits are superb. I’ve built two Grants and have a Lee Interior Kit on the shelf for when I clear some space (a lot of space) on my bench and finish the 6-8 projects I have working including a Miniart T-34/85. Very nice work on yours! Edited April 9, 2021 by f matthews Link to comment Share on other sites More sharing options...
Model Mate Posted May 5, 2021 Author Share Posted May 5, 2021 Slow progress on the Lee I’m afraid, but something has been achieved at least. I completed the main gun and added it to the hull upper. Everything got the usual grey acrylic chipping and black & burnt umber oil washes. I’ve just upgraded to W&N artist colours and they’re lovely – very fine pigmentation which really helps with very thin washes. I had been using Winton (W&N’s budget range) but these posh ones are noticeably better. I removed the gun barrel cleaning rods and added a couple of foil straps. I plan to use Miniart’s tank gun cleaning crew in a diorama. With all the internals in place I was able to glue on the upper hull. This required a gradual fixing using plenty of clamps and tape to close up gaps (as best I could) probably due to my deviation from the instructions, but it seems to have worked out ok. The last part of the main body panels to be installed was the front glacis. I painted a drop of dark grey into each dial and used a pin to scratch marks onto them, revealing the white below, before a drop of gorilla clear glue was added to each for “glass”. That’s all for now… 13 Link to comment Share on other sites More sharing options...
vytautas Posted May 5, 2021 Share Posted May 5, 2021 Super! I really like it. The more dirt, the more beautiful it is. Vytautas Link to comment Share on other sites More sharing options...
echen Posted May 5, 2021 Share Posted May 5, 2021 If the exterior ends up to the same high standard as the interior you'll have a real masterpiece in your collection. 👍 Link to comment Share on other sites More sharing options...
edjbartos Posted May 5, 2021 Share Posted May 5, 2021 Nice work, lovely detailed painting, looks great, the weathering of the interior in my opinion is bang on.. Ed Link to comment Share on other sites More sharing options...
Model Mate Posted May 5, 2021 Author Share Posted May 5, 2021 Ahh, thanks chaps! High praise indeed from you lot.... I’ve just taken delivery of some fresh plastic card and tube, so a new scratch build is on the way. Hopefully it won’t push this one back onto the shelf of doom though. 1 Link to comment Share on other sites More sharing options...
Model Mate Posted May 22, 2021 Author Share Posted May 22, 2021 Minor update – The turret interior got a bit of attention. The usual white followed by acrylic grey sponge dabs, oil washes and a touch of graphite. The overhanging rear bodywork panels were glued in place along with the idler wheels. I plan to leave the engine panels loose so they can be taken off for viewing all that lovely engine detail. Thankfully it seems to fit very neatly without glue. 13 Link to comment Share on other sites More sharing options...
echen Posted May 22, 2021 Share Posted May 22, 2021 27 minutes ago, Model Mate said: the engine panels loose so they can be taken off for viewing all that lovely engine detail. And so they should! Great shame to hide that engine. Link to comment Share on other sites More sharing options...
edjbartos Posted May 22, 2021 Share Posted May 22, 2021 Really nice work you have done so far, detailing is great and super weathering. " I plan to leave the engine panels loose so they can be taken off for viewing all that lovely engine detail. " I totally agree with this option, Miniart generally give a really good fit of parts that allow you to take this option and I'm pleased that you are doing so, it's a shame if you hide all the good work that you have done. Well done really excellent work.. Ed Link to comment Share on other sites More sharing options...
Model Mate Posted June 7, 2021 Author Share Posted June 7, 2021 I finished off the turret internals and got the top glued onto the basket. The cupola was also finished off, ready to fit. And here it is all together…. The turret was a bit of a snug fit, with a slight gap appearing towards the middle of the vehicle, so I had to file/sand the rings around the base of the turret a little to get it to sit nicely. As with the engine panels, I’ll not be gluing the turret in, so it can be removed later to see all the insides. I also added the main grab handles from aluminium wire and have been plugging away at the tracks. They’re a bit fiddly, so I made up a simple jig to make it easier. 10 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now