viper-30 Posted April 7, 2021 Share Posted April 7, 2021 Loving this sir 1 Link to comment Share on other sites More sharing options...
Britman Posted April 7, 2021 Share Posted April 7, 2021 Lovely kit straight out of the box. Looking with interest, might even shuffle my F6 up the pile. Keith 1 Link to comment Share on other sites More sharing options...
Lord Riot Posted April 8, 2021 Author Share Posted April 8, 2021 Following a tip on this forum I masked over where the demarcation line will be then sprayed the same colour (Barley grey) over the line to seal it. I’ll leave this to dry overnight now before spraying over the dark sea grey on all the upper surfaces. It looks quite nice pale, I might need to get yet another Lightning to do in the overall light grey colour. 2 Link to comment Share on other sites More sharing options...
Lord Riot Posted April 8, 2021 Author Share Posted April 8, 2021 It’s pretty quick drying this spray so I applied the dark sea grey this afternoon. I don’t want to leave the masking tape stuck on any longer than necessary in case it leaves marks. Looking nice and dark once indoors. 7 Link to comment Share on other sites More sharing options...
Lord Riot Posted April 8, 2021 Author Share Posted April 8, 2021 Always a slightly interesting moment when removing the masking. Fortunately this time the demarcation line seems adequate enough. I’ll probably just give it a light dirt wash to show up the panel lines, etc though there are a lot of little vents and exhausts on the fuselage that will need some staining around them. 7 Link to comment Share on other sites More sharing options...
Hook Posted April 9, 2021 Share Posted April 9, 2021 That does look nice! They grey Lightnings always got some very interesting general grubbyness, looking forward to your weathering. Are you going to add the natural metal underwing panel? Cheers, Andre 1 Link to comment Share on other sites More sharing options...
Lord Riot Posted April 9, 2021 Author Share Posted April 9, 2021 2 hours ago, Hook said: That does look nice! They grey Lightnings always got some very interesting general grubbyness, looking forward to your weathering. Are you going to add the natural metal underwing panel? Cheers, Andre Thank you Andre! I’ll have to carefully follow the photos when I do the weathering, don’t want to ruin it. Yes I’ll need to add the panel, I’m considering using kitchen foil for that. Unless anyone has any better ideas? ... Link to comment Share on other sites More sharing options...
Lord Riot Posted April 9, 2021 Author Share Posted April 9, 2021 I’ve made the radar shroud from kitchen foil wrapped around a cocktail skewer and painted black. Close ups don’t do it many favours but I tried! 4 Link to comment Share on other sites More sharing options...
Lord Riot Posted April 9, 2021 Author Share Posted April 9, 2021 I added a couple of wires to the rear cockpit bulkhead and the yellow thing that I saw in a photo. Just a dry fit for the seat and bulkhead at this stage. Kitchen foil for those natural metal side panels. Anyone know what they are and why they’re never painted? 1 Link to comment Share on other sites More sharing options...
Lord Riot Posted April 9, 2021 Author Share Posted April 9, 2021 After gluing those foil panels on it actually looks like XS933 was one of the few Lightnings that didn’t have them! I’ve peeled them off without too much damage and I’ll touch it up with some Humbrol 167. It should just look like a different panel. I’ve used the dirt wash for the grimy fuselage and under the wings. Most photos seem to show they were usually pretty dirty, especially in the years towards the end of their service. Is this too much though? ... Any suggestions as to creating a few different shade panels on the upper dark sea grey surfaces? 4 Link to comment Share on other sites More sharing options...
Lord Riot Posted April 11, 2021 Author Share Posted April 11, 2021 I’ve decided to go for Red Top training rounds, without the main fins. They seem to be a kind of silver grey, so that’s what I’ve painted here after cutting off the fins and filling and sanding the slots. More to do yet; the rear parts including the small tail fins look black, plus there are a few lines to go around but decals should suffice. 2 Link to comment Share on other sites More sharing options...
Hook Posted April 11, 2021 Share Posted April 11, 2021 On 4/9/2021 at 7:53 PM, Lord Riot said: I’ve used the dirt wash for the grimy fuselage and under the wings. Most photos seem to show they were usually pretty dirty, especially in the years towards the end of their service. Is this too much though? ... Not to my eyes - they got pretty grubby in service. Looking good! Quote Any suggestions as to creating a few different shade panels on the upper dark sea grey surfaces? I use this: https://www.migjimenez.com/en/weathering-products/371-plw-deep-grey.html Cheers, Andre 1 Link to comment Share on other sites More sharing options...
Lord Riot Posted April 11, 2021 Author Share Posted April 11, 2021 Red Top training rounds coming along. I painted the underneath of this clear part red for the light, so it looks like it’s clear from the side and red from the top. 2 Link to comment Share on other sites More sharing options...
tweeky Posted April 11, 2021 Share Posted April 11, 2021 (edited) Quote I painted the underneath of this clear part red for the light, so it looks like it’s clear from the side and red from the top Unfortunately the only red light externally on a F3,F6 and the T5 Lightning was the port wing tip light. The one on the spine the two underwing ones ( little bulges near the nav lights) and the two (one each side) of the No1 reheat pipe were all clear with whiteish/yellow bulbs. The natural metal panel under the wing was called the stress panel and it was regularly inspected for cracks. This was the main reason it wasn't painted. Edited April 11, 2021 by tweeky additional info 1 Link to comment Share on other sites More sharing options...
Lord Riot Posted April 11, 2021 Author Share Posted April 11, 2021 Light bulb changed! A shame really as the red one looked better. 2 Link to comment Share on other sites More sharing options...
Lord Riot Posted April 11, 2021 Author Share Posted April 11, 2021 The jet pipe area needed a bit of filing to fit. 4 Link to comment Share on other sites More sharing options...
Tornado 01 Posted April 11, 2021 Share Posted April 11, 2021 Crikey I just realised its just about 2 months to go before its 33 years since the RAF retired them....🙄 Thankfully BAE kept them going for a little longer. 1 Link to comment Share on other sites More sharing options...
Lord Riot Posted April 11, 2021 Author Share Posted April 11, 2021 1 hour ago, Tornado 01 said: Crikey I just realised its just about 2 months to go before its 33 years since the RAF retired them....🙄 Thankfully BAE kept them going for a little longer. I was thinking about that while working on the kit earlier. I remember going to that soaking wet Last, Last Lightning Show as a kid in 1987. I wish we still had an Air Force like that now. I’ve pretty much given up with spotting, photos and air shows, there’s nothing worth watching anymore apart from the occasional trip to Lakenheath. 1 Link to comment Share on other sites More sharing options...
Tornado 01 Posted April 11, 2021 Share Posted April 11, 2021 Its rather sad but true. And its not getting any better.... Trouble is the more they wither the Armed Forces the less a sizable amount of the public now seems to care after Iraq and Afghanistan. They are less than interested I reckon.... unlike when we had a huge presence in the world order... 2 Link to comment Share on other sites More sharing options...
Tornado 01 Posted April 13, 2021 Share Posted April 13, 2021 From memory the Red Top rounds were always finless unless they flew with Live Rounds, keeping the fatigue life down IIRC Link to comment Share on other sites More sharing options...
Lord Riot Posted April 14, 2021 Author Share Posted April 14, 2021 Main oleos added, and I finally over painted the stress panel under the wings. Thoughts, comments, advice ... ? 2 Link to comment Share on other sites More sharing options...
Lord Riot Posted April 15, 2021 Author Share Posted April 15, 2021 Strange mushrooms around here. I used the Mig panel line wash for the upper wing surfaces. It’s quite thin, so doesn’t really highlight them much but maybe because they’re already dark sea grey. The stance is good, no tail sitting! 5 Link to comment Share on other sites More sharing options...
Alpha Juliet Posted April 15, 2021 Share Posted April 15, 2021 Really beginning to look the part! Well done sir! 1 Link to comment Share on other sites More sharing options...
Hook Posted April 15, 2021 Share Posted April 15, 2021 She looks mighty fine! How is your experience with the Mig product? Cheers, Andre 1 Link to comment Share on other sites More sharing options...
Lord Riot Posted April 15, 2021 Author Share Posted April 15, 2021 4 hours ago, Hook said: She looks mighty fine! How is your experience with the Mig product? Cheers, Andre Thanks Andre. I like it! Although it doesn’t show up much on dark grey it’s great on the paler greys. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now