Mjwomack Posted March 13, 2021 Share Posted March 13, 2021 The rules are simple (the building might not be so simple) 1. Your hosts are @Mjwomack @Pin @trickyrich any questions about eligibility of a build should be addressed to them. Actually Rule 1 is to have fun. Here's a chance to revisit modelling materials that are long out of fashion or never been tried. This is the place to fall flat on face and be helped back on your feet again. I'm sure we'll all help everyone along as best we can. @Mjwomack will be one hand with encouraging words which @Pin and @trickyrich will also do but with the added value of knowing things! 2. Any material other than injection molding is permitted. This is the guiding principle but if need be some IM material can be raised from the spares box. Any subject is allowed, real, what if, sci fi, fantasy, anything I missed 3. Standard GB rules apply, you can participate with a previously started model but it has to be less than 25% complete at the commencement of participation. Any doubts, ask the hosts, but we're very chilled about this especially with so much preparatory work for 3D printing, vac-form etc making it hard to know when the construction side starts 4. All threads that wish to be considered for the poll need to have a work in progress (WIP), thread posted within the GB thread AND have a ready for inspection (RFI), post posted within the GB Gallery by cessation of the GB. 5. The GB runs from 20 March to 11 July 2021. All gallery posts need to be posted by 2359 GMT on the 11 July 2021. 2 Link to comment Share on other sites More sharing options...
Recommended Posts